New Items Nieuws Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy Aerodrive SK3 - 6364-190kv borstelloze Outrunner Motor

Turnigy Aerodrive SK3 - 6364-190kv borstelloze Outrunner Motor

Shipped From:
  • USA
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 66,46
status:
In voorraad
SKU:
SK3-6364-190
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motoren zijn de volgende sprong voorwaarts in motor kwaliteit en design. We gaf de ingenieurs om de beste kwaliteit magneten, lagers en materialen beschikbaar zijn voor hen de bron en het ontwikkelen van een motor die zou niet alleen rivaal, maar overtreffen de kwaliteit van vele toonaangevende autofabrikanten op de markt vandaag.

Het resultaat is een efficiënte, hoog kaliber motor met behulp van kwaliteit dubbel afgeschermde lagers, gesinterde Neodymium magneten en een string gewonden stator zorgen voor een nauwkeurige en consistente kronkelende elke keer.

De Turnigy SK3 motoren zijn geschikt voor modelbouwers die op zoek zijn naar een hoge kwaliteit borstelloze motor zonder compromissen.

Specs.
Turns: 18T
Voltage: 10S LiPoly
RPM / V: 190kv
Inwendige weerstand: 0,028 Ohm
Max Laden: 65A
Max Power: 2450W
Shaft Dia: 8.0mm
Bolt gaten: 32mm
Bolt thread: M4
Gewicht: 697g
Motor Plug: 4mm Bullet Connector

 

  • Sku SK3-6364-190
  • Brand SK3
  • Gewicht 1005.0000
  • Lengte 175.00
  • Packaging Width 75.00
  • Hoogte 135.00
  • Kv ( tpm / v ) 190.00
  • Max Currents (A ) 65.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 37.00
  • Vermogen ( W) 2450.00
  • Shaft A ( mm ) 8.00
  • Lengte B ( mm ) 73.00
  • C Diameter ( mm ) 59.00
  • Kan Lengte D ( mm ) 51.00
  • Totale lengte E ( mm ) 103.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I use this motor in F3A plane with 10S Nanotech4000, SentilonHV100 (middle timing, low is not working with this combo!) and 20x12 Turnigy wooden electric propeller. Needs to be limited to 88pcnt (FX30 throttle end-point), current cca 65Amp at the beginning and motor is quite hot after 6min flight and 2,7Ah. Overall - good job for the money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this motor in F3A plane with 10S Nanotech4000, SentilonHV100 (middle timing, low is not working with this combo!) and 20x12 Turnigy wooden electric propeller. Needs to be limited to 88pcnt (FX30 throttle end-point), current cca 65Amp at the beginning and motor is quite hot after 6min flight and 2,7Ah. Overall - good job for the money.

I use this motor on a Black Horse Ryan STA 2.35m wingspan and about 6.5kg. Setup:

Turnigy Aerodrive SK3 - 6364-190kv

TURNIGY Sentilon100A HV 5-12S BESC (Ver4)

12s Flightmax 5000 mAh 25C

APC 18x10e prop

7600 rpm, 70A, 2940W



Motor is cool after 8 minutes of acro flight, about 41 degrees celcius. 2800 mAh used from the batteries, about 21A average.



I use 12s packs because i have them. 10s would be a better option, larger prop.



Motor is very well build. The extra large bearings supports the load very good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this motor on a Black Horse Ryan STA 2.35m wingspan and about 6.5kg. Setup:

Turnigy Aerodrive SK3 - 6364-190kv

TURNIGY Sentilon100A HV 5-12S BESC (Ver4)

12s Flightmax 5000 mAh 25C

APC 18x10e prop

7600 rpm, 70A, 2940W



Motor is cool after 8 minutes of acro flight, about 41 degrees celcius. 2800 mAh used from the batteries, about 21A average.



I use 12s packs because i have them. 10s would be a better option, larger prop.



Motor is very well build. The extra large bearings supports the load very good.

Customer files
SK3-6364(DT5035-14P) MOTOR (edited).pdf Download [122]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking