Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 - 6374-149kv borstelloze Outrunner Motor

Turnigy Aerodrive SK3 - 6374-149kv borstelloze Outrunner Motor

QTY:

Now save bewaar € 0,00 € 0,00

€ 68,45
Stock:
Gewicht:
1265 g
SKU:
SK3-6374-149

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Product
Omschrijving

Turnigy SK3 Motoren zijn de volgende sprong voorwaarts in motor kwaliteit en design. We gaf de ingenieurs om de beste kwaliteit magneten, lagers en materialen beschikbaar zijn voor hen de bron en het ontwikkelen van een motor die zou niet alleen rivaal, maar overtreffen de kwaliteit van vele toonaangevende motor produceert op de markt vandaag. Het resultaat is een efficiënte, hoog kaliber motor met behulp van kwaliteit dubbel afgeschermde lagers, gesinterde Neodymium magneten en een string gewonden stator zorgen voor een nauwkeurige en consistente kronkelende elke keer. De Turnigy SK3 motoren zijn geschikt voor modelbouwers die op zoek zijn naar een hoge kwaliteit borstelloze motor zonder compromissen. Specs.Turns: 18TVoltage: 12S LipolyRPM / V: 149kvInternal weerstand: 0.021 OhmMax Laden: 70AMax Vermogen: 2250WShaft Dia: 8.0mmBolt holes: 32mmBolt thread: M4Weight: 840gMotor Plug: 4.0mm Bullet Connector

Product
Specifications

Aanvullende Informatie

  • Sku:
    SK3-6374-149
  • Brand:
    Turnigy
  • Gewicht ( g)
    1265.00
  • Lengte
    175.00
  • Breedte:
    70.00
  • Hoogte:
    135.00
  • Kv ( tpm / v )
    149.00
  • Max Currents (A )
    70.00
  • Vermogen ( W):
    2250.00
  • Lengte B ( mm ):
    86.00
  • Kan Lengte D ( mm )
    61.00
  • Max Voltage ( V )
    44.00
  • Shaft A ( mm ):
    8.00
  • Unit Weight (g):
    840
  • C Diameter ( mm )
    59.00
  • Totale lengte E ( mm )
    113.00
  • Resistance ( mh ):
    21.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Listen carefully, I set up this engine on an extra 260 2,40m and 9kgs! I started with one and now a 23x8 25x10! These engines do not heat and do not consume too much and it is not power that impresses but the torque that can cause large propellers. I much prefer the G160 and Rotomax 1.40 and 1.60. I am very happy with this cheap and efficient engine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hab ich in meiner Pilatus Turbo Porter an einer 23x10 geht echt gut
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor comes with a 10mm prop shaft that bolts on the front, and an 8mm to 10mm collet shaft to go on the motor shaft, it tightens on very tightly and can be hard to remove, so no set screws should be needed. This motor has loads of torque. I use it on my mountain board with a 6s 8000mah lipo, and an 11 tooth and 68tooth #25 sprocket set. On a level surface it draws less than 3-5A during low to medium acceleration, and can maintain speed at less than 1-3A. It draws 15-20A with low to medium accel up hill, and can draw over 25A doing a burnout on level ground. My board goes about 9-12mph. It is best to give it a small push with throttle to start it, so it doesn't loose timing. The brake on the YEP 120A ESC is at the lowest setting (acro) which is a little too hard to use much faster than walking speeds, so I jump off then hit the brake. The ESC has been staying cool without the fan on. It is programmed with 4pcnt starting throttle, but I might try 8pcnt. It should go 4.5 miles of mixed throttle with some small hills on one charge.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super Motor fr meine Pilatus Turbo Porter an 12S

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Put this engine on an old Top Flite Stinson Reliant, 100.5" wingspan, 22lbs flight ready with batteries, running a 20/8 prop, two 6s 5000mah batteries in series. Pulled 45 amps, produced 15lbs of thrust. Flew great!! After a 5 minute test flight battery cells still showed 3.92. Looking forward to testing it with a 24" prop, see if I can increase minutes in the air. Good replacement for 30cc gas
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor. I've put 2 of these on my mountainboard with 15:64 reduction (HTD5-15mm belts) and with 20 cm diameter wheels I get 35 Km/h of maximum speed (with an 8s LiPo) and a torque and acceleration that are just insane (can climb a hill on grass with 2 people on the skate without problems. Range is 10 Km with a 5 Ah battery.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is basically the go-to choice for powerful yet lightweight small electric vehicle drive systems. It's basically the slowest outrunner in this size available (even the former 80xx and 120xx motors are too fast for their size), making it compatible with some of the inexpensive electric bike ESCs which perform current control and have other useful EV features. Hall sensor add-on packages are available for this size as well (search your favorite search engine for SK3 Hall Sensor or similar). Typically 1500plusW in a vehicle application on 36v with a capable controller.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very powerfull, can swing a 27x10" prop and provide a static thrust of over 11kg.
Use with 70AK force controler.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this motor for a scooter and so far it pushes me along fine except the three screws that hold the starter in place come loose easily and so do the screws that hold on the bell.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this motor for an electric scooter and it works great on a 6 cell lipo configuration except it gets a bit warm when pushing me (120 lbs) up hills with a 13 tooth pinion sprocket and 60 tooth spur sprocket on a 12 1/2 inch wheel. The three screws that hold the starter to the end also came loose after a few hours of use, so put locktight on all of the screws before you use this motor for any length of time.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Skateboard electrique (rampe, passe bas)

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.