Turnigy AquaStar 3660-1460KV Watergekoelde borstelloze motor

• Overall
• Quality
• Value

turnigy aquastar

May 12, 2022

faast to ship thanks

• Overall
• Quality
• Value

Customer Rated

Apr 08, 2015

abolutely wrong specs. As other customers refer, this motor can't run with 6S LiPo cell, it burns after few seconds, magnet cracked and smoke everywere.
If you want to run it with 3 or 4 S it's ok. Poor internal mechanical design.

• Overall
• Quality
• Value

Customer Rated

Aug 07, 2014

I forgot one piece of important information . I am running 2) X445 props surface piercing cupped and balanced . Again A on the motors and speed controls.

• Overall
• Quality
• Value

Customer Rated

Aug 07, 2014

I am running two of these bolted to 2) Graupner 800 gtx gear driven outboards on a 40 inch Dumas hull that weigh's total 12 1/2 lbs. Prop shafts are even with the bottom of the boat. Not the bottom of the V. So if your looking from the back of the boat, The center of the propshaft is even with the hull directly in front of it. This height eliminates load on speed controls.I am running 2) 120 Amp Aquastar ESC"s and 2) 4S batterys. The boat does 38 MPH for 20 min no heat problem , Boat has built in water pick ups on bottom of hull. I give these motors a A rating ,Powerful!