Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Turnigy B36-56-04 2600kv Inrunner

Turnigy B36-56-04 2600kv Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
290 g
SKU:
B36-56-04-2600
Product
Omschrijving

Turnigy borstelloze Inrunner

Spec.
Kv: 2600rpm / v
Vermogen: 475W
Turns: 4
Resistance: 10
Idle Current: 5.3
Esc: 60
Batterij Config: 3-5s
Lengte: 57mm
Breedte: 36mm
Shaft: 5mm
Gewicht: 260g

Product
Specifications

Aanvullende Informatie

  • Sku:
    B36-56-04-2600
  • Brand:
    Nvt
  • Gewicht ( g)
    290.00
  • Lengte
    0.00
  • Breedte:
    0.00
  • Hoogte:
    0.00
  • Kv ( tpm / v )
    2600.00
  • Max Currents (A )
    0.00
  • Vermogen ( W):
    475.00
  • Lengte B ( mm ):
    57.00
  • Kan Lengte D ( mm )
    55.00
  • Max Voltage ( V )
    19.00
  • Shaft A ( mm ):
    5.00
  • Unit Weight (g):
    260
  • C Diameter ( mm )
    36.00
  • Totale lengte E ( mm )
    70.00
  • Resistance ( mh ):
    10.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
brought one of these a month ago. used it 4times running 4s 5800mah 25c with 120amps sec and 36mm prop in my rc surfer and it got extremely hot and died. motor had plenty of power tho when it was running.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just received 2 of these motors, haven't done much testing yet. Just a basic test connecting to ESC (without installing in a model) to make sure it works.

It looks well made; and the noise level isn't very high when it works.

Note that the weight of the motor is 170g (including wires as shown on the picture) and not 260g. Even when wrapped in plastic and packed in cartoon box the weight is 185g.

I noted that it gets warm when runs on full throttle - even only for a few seconds, even without any load, even only on 3S lipo battery
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just received 2 of these motors, haven't done much testing yet. Just a basic test connecting to ESC (without installing in a model) to make sure it works.

It looks well made; and it the noise level isn't very high when it works.

Note that the weight of the motor is 170g (including wires as shown on the picture) and not 260g. Even when packed in the plastic and cartoon box the weight is 185g.

I noticed it becomes warm after running on full throttle even for a few seconds (even without any load at all) so I guess it will become hot in real use. I plan to use water cooling anyway...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just received 2 of these motors, haven't done much testing yet. Just a basic test connecting to ESC (without installing in a model) to make sure it works.

It looks well made; and it the noise level isn't very high when it works.

Note that the weight of the motor is 170g (including wires as shown on the picture) and not 260g. Even when packed in the plastic and cartoon box the weight is 185g.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is great! Works great in my hobbico superstar EP. Fits the stock brushed mount perfectly!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I picked one up for a 40 " boat project and it rips flat out on 5s . Huge power with the rite aplication great buy and great motor
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Stopped working after about 10 min in my 1/8 monster truck maybe good for 1/10 scale think I will get a XL size motor this is a large size.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
runs wicked have got on back of tunnel hull hornet needs a 100amp esc to run ,great value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have put it in a jet FLYFLY thunderbird with a chensung 90, 5s 4000 and esc 200A HK.Watt'up tell 95A and 1700w !!! edf run to 44.000 rpm and thunderbird 230 km/h.I have put a heatsink.. motor not extremly hot...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I filed the shaft and used it on a 1/10 Short course truck(HPI Blitz). It was way too powerful on 3S plus. Shredded the tires like they were paper, but it sure was fast. Cheap alternative to the VXL... but you need to make sure the shaft is long enough. It's much shorter than most car motors. It also needs to be modded to accept a car pinion.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.