Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren

Turnigy B6 PRO 50W 6A Balance Charger (zwart)

Turnigy B6 PRO 50W 6A Balance Charger (zwart)

Now save bewaar € 5,16 € 5,16

Special Price € 12,67 € 12,67

You save bewaar € 5,16 € 5,16

Was  € 17,83

Uit voorraad!
Stock:
OUT OF STOCK
Gewicht:
360 g
SKU:
9070000042-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

De Turnigy B6 PRO Pocket Charger is een multifunctioneel, zeer draagbare lader / ontlader en balancer voor Li-xx, Ni-xx en lood-zuur batterijen.

Het zit vol met functies die het mogelijk maken om op te laden en bewaken van de status van uw accu's.

De B6 Pro is geschikt voor het opladen van maximaal 6 cell Lixx (1 ~ 15 Ni-xx) packs 0.1 ~ 6,0 Ampère. Het zal in rekening brengen 0,1-6,0 ampère en deze lader kunnen de gegevens voor maximaal 5 accu's in het interne geheugen voor uw gemak te slaan.

Het beschikt over bescherming ingangsspanning om te voorkomen dat uw accu van de auto op het veld en temperatuurcontrole plat (sonde niet meegeleverd). Het zal ook de opslag in rekening brengen packs voor wanneer u ze niet gebruikt.

De B6 PRO kan worden gevoed door een geschikte voeding leveren vanaf 11 ~ 18V DC. Het wordt geleverd in een reeks van 4 heldere kleuren voor gemakkelijke locatie en identificatie.

Kenmerken:
• Veiligheid timer
• Capaciteit Limit
• Temperatuurbewaking
• input power monitoring
• Individuele celbewaking
• 5 batterij geheugen
• 2 Line backlit LCD-display
• Ingebouwde Balancer voor 6S packs
• Cyclus laden / ontladen (niet beschikbaar voor Li-xx cellen)
• Inclusief "FAST" en "opslag" Li-xx's
• Makkelijk te gebruiken

specs:
Max output: 50W
Max ontlading: 5W
Balancing stroom: 300mAh / cell
Ingangsspanning: 10 ~ 18V DC
Ni-Cad / Ni-MH: 1 ~ 15 cellen
Li-Ion / Li-Po / Li-Fe: 1 ~ 6-serie
PB / Lead Acid: 2 ~ 20V
Laadstroom: 0.1 ~ 6.0a
Ontlaadstroom: 0.1 ~ 1.0A
Balance connectors: JST-XH-connectoren
Aantal Cycles: Tot 5 Cycles (niet beschikbaar voor Li-xx cellen)
Afmetingen: 137 x 74 x 26mm
Gewicht: 164 g

inclusief:
1 x Turnigy B6 Pro Pocket Charger
1 x XT60 Connector opladen Lead
1 x XT60 tot Alligator Clip Adapter
1 x Input Alligator Clip Lead
1 x Glow / Futaba / JST adapter
1 x uitgebreide handleiding


Voeding niet inbegrepen

Product
Specifications

Aanvullende Informatie

  • Sku:
    9070000042-0
  • Brand:
    Turnigy
  • Gewicht ( g)
    360.00
  • Lengte
    160.00
  • Breedte:
    30.00
  • Hoogte:
    130.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Really cheap, and does everything you would expect from a 50W general charger. It even does IR measuring tough not really accurately. Generally good but it can get very hot (up to 85 Celsius) especially during discharging.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's a great charger if you only want to charge up to 3.4amps, I've had it a few months now and it was great for charging my 1500mw 4s. but then I got a parallel charger so was trying to charge 6000mw at once (6 amps) but the max it will do is 3.4 amps, this makes the charging really slow. very disappointed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
..................................................................................................................................................................................................................................................................
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Cheap 50W charger, good for small batteries. can charge 6S at about 2.1A.



it is very quiet cos it has no fan, but gets warm too. it has also internal resistance measure program, the rest is same as any other 50w charger
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Amazing charger for all beginner pilots. Chargers lipos fast but the only down side is the discharging of batteries but if you fly till storage voltage its fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great charger especially for the price. it charges my 3s 2200mAh in a little over 45 mins.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It arrived yesterday, it has the same menu as all the other similar chargers, it has an aluminium backing plate, I assume it's for heat dissipation, seems to be working fine, I will report back after I put a few battery's through it, for au$14 I don't think I'll be complaining *-)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i bought 9070000042-0 (black) and have some problems:

1.) storage mode is set at 3.7V per cell ... but recommended is 3.85V
2.) discharge mode is set at 3.0V per cell ... little too low
3.)no calibration menu ... why??

no firmware update from HobbyKing, only return
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this charger so I could charge a 2S 180mAh Lipo at 1C charge rate, but it is a suitable replacement for my other charger. Not many can charge at less than 1A, but this one can charge at 0.1A. A large aluminum heat sink is on the backside of the case. Charging voltages were measured to be very accurate (only 4S was tested). The provided manual is well written in English, but the author doesn't fully understand the subject (several mistakes were found in the programming diagram). Mine was improperly manufactured such that the balance port couldn't accept balance connectors with balance plug savers installed. From looking at all the photos, it appears that they all improperly manufactured that way. I was able to repair mine for balance savers with some partial de-soldering and re-soldering. The DC connector takes a 5.5mm x 2.5mm plug. An AC adapter from an IBM Thinkpad (part #92P1017, 16VDC/ 4.5A/72W) with 5.5mmx2.5mm plug is well suited for this charger and can be found new/used for about $6USD delivered on a popular Auction web site. For the low price, this charger/discharger is hard to beat.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.