Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Turnigy Bell 2409-18T 1200kv Outrunner

Turnigy Bell 2409-18T 1200kv Outrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
87 g
SKU:
TR_2409_1200
Product
Omschrijving

De Turnigy bel motor eruit ziet en loopt precies hetzelfde als de Towerpros, op 2/3 van de kosten!

Turnigy Bell 2409-18T 1200Kv

Gewicht: 56g
Voltage: 10v (2 ~ 3 Cell lipo pack)
Idle Current: 0,9
Kv: 1200
Shaft: 3mm Diameter
Max efficiënt stroom: 15.5A
Max Load: 20A
Max Vermogen: 180W
Voorgestelde Propeller: 9x3.8 SF Propeller (zoals GWS Slow Fly)

* Dit is niet gemaakt door TowerPro.

Product
Specifications

Aanvullende Informatie

  • Sku:
    TR_2409_1200
  • Brand:
    Nvt
  • Gewicht ( g)
    87.00
  • Lengte
    0.00
  • Breedte:
    0.00
  • Hoogte:
    0.00
  • Kv ( tpm / v )
    1200.00
  • Max Currents (A )
    20.00
  • Vermogen ( W):
    180.00
  • Lengte B ( mm ):
    31.00
  • Kan Lengte D ( mm )
    15.00
  • Max Voltage ( V )
    11.00
  • Shaft A ( mm ):
    3.00
  • Unit Weight (g):
    56
  • C Diameter ( mm )
    31.00
  • Totale lengte E ( mm )
    64.00
  • Resistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
With a fully charged Zippy Flight max 20C 1300mAh 3S and a GWS 8x6 prop :
Power (W) - Thrust (gram)
10w - 60g,
20w - 80g,
30w - 150g,
50w - 210g,
60w - 240g,
70w - 280g,
90w - 340g,

With the same set-up, the Kv1000 will give better results (see review of the kV1000).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not that impressed with this product. I bought for my ME109 and it seems similar to the 1300 KV motor in looks but the performance dos not match. The 3 mm shaft snapped after a crash, replaced it with the Towerpro 2409 replacement shaft. They almost fitted perfect but ended up bending in the test bench at 5-600 grams of trust. The motor was very hot after this test.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
swapped the stock motor with this one in my minimoa using the stock 11 inch folding prop. no problems with heat since i used the motor climb and then glide most of the time. good motor. has enough power, efficiency for the price. great buy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super fr den Preis. Nutze Sie als Ersatzmotor fr :HKMini-YAK54

und 1HK6 Mini P-51 (Mustang)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good item to,this product is worth its
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
EXCELLENT motor! Very nice quality and super performance!

Buy it with full satisfaction!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice little motor. Overheated and burnt the motor and speed controller out with 9 x 3.8 prop on 3S lipo. Seems fine on smaller 8 x 3.8 prop. Very good price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Doesn't look the best motor, and seemed stiff to turn by hand.

However, it was not expensive and it was bought for a small Cessna as a replacement for the original motor.

Using a 25A ESC and 3s 1300 Max Tipple batteries

GWS DD 8x4 = 90W @ 8A

GWS DD 8x6 = 140W @ 12A

I will update this post when it is fitted and has been flown.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Run this motor on My super Cub and HobbyKing YAK 54 Brushless EPO Plug-n-Fly

after 10min flight with 1300mAh 11.1V 20C, the motor is warm.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Otimo motor, parecido com E-max 2822 .. recomendo
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.