Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy Dlux 160A HV Brushless Speed ​​Controller (OPTO)

Generating Links

Turnigy Dlux 160A HV Brushless Speed ​​Controller (OPTO)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 142,66
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
TGY_DEL160HV
Geen verzendkosten? Klik hier meer leren!

Turnigy® Dlux SER's hebben een nieuwe benchmark in kwaliteit en prestaties in te stellen. Elke ESC maakt gebruik van een dubbele PCB ontwerp het scheiden van de motor voeding & MCU. Dit ontwerp zorgt voor een optimale component lay-out op elke PCB en biedt de ideale configuratie voor warmteafvoer en thermische efficiëntie. Beide PCB's zijn ingesloten in een volledig aluminium koellichaam behuizing voor maximale warmteafvoer te garanderen. Alle Turnigy Dlux SER's kunnen worden geprogrammeerd via een programing kaart of door de zender. Duidelijk en gemakkelijk te begrijpen instructies zijn inbegrepen.

Spec.
Max Cont Current: 160A
Max Burst Current: 180A
BEC: N / A
LiPo: 6 ~ 12S
NiMH: 16 ~ 36cells
Gewicht: 157grams
Max RPM (2-polige): 200,000rpm
Afmetingen: 83 x 33 x 23mm
Motor Plug: Female 4mm bullet Connector
Batterij Plug: Nil
Kenmerken: Spark Eliminator Lead met 2mm Plug

Kenmerken.
Extreem lage interne weerstand
Zeer lage bedrijfstemperatuur
Te hoge temperatuur bescherming
APEC mosfets (Taiwain)

Programming Opties.
Batterij Type: 6S ~ 12S
Vooruit / achteruit
Zacht begin
LV Knip type (Negeren, verlaagt het stroomverbruik, Stop Motor)
LV Knip instelling (2,5 ~ 3,5 V in stappen van 0.1V)
Timing (Auto, Zeer laag, Laag, Normaal, Hoog, Zeer HGH)
Switching (8,16kHz)
Factory Restore
Active RPM Controle: On / Off (Gouverneur Mode)

Fabrieksinstellingen.
Brake: off
Battery: LiPo Auto Detect
Low Voltage: 3.2V (power down motor)
Timing: Auto
Frequentie: 8KHz

Opmerking: Het programmeren box nu beschikbaar, controleer dan de gerelateerde items hieronder.

  • Turnigy DLux 6s-12s ESC
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Furby_Goulag | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 09, 2016

Bought to power a big boat on 10S.

Before puting a custom watercooling on it, runned it on 10S out of the water (no load).

Burnt almost instantly, do not understand the issue, but seems of not very good quality.

Dieselrotor | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Sep 15, 2015

I ordered one of these to replace a 35ccNGH motor I had bought from Hobbyking that arrived damaged and was warrantied but still absolutely refuses to run inverted so I decided to go electric instead. Ironically, the ESC arrived, looked great,looked well built but would not power up ? I kind of had to chuckle having spent this money to replace another high buck product from here and now I have the same plane with two power systems that still has not flown LOL ! I found a Youtube video with this ESC that had the same problem for that guy. But know, I am happy with Hobbyking, they're doing a great job and they're stuff is reasonably priced. I just happened to get two lemons for the same plane 6 months apart.

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 16, 2015

Muy facil de programar,asta ahora bien,lo tengo instalado en una turbina de 90 electrica a 12s

Barry | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2015

Used this three times drawing 101 amps on 10S. On the third flight it went off with a bang, melting itself and dropping molten solder onto the bottom of the cowl (spun aluminium luckily). Luckily it was not mounted in the fuselage or my 1/3 scale WW1 Moraine may have been shot down in flames.

samsman | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2015

Too late for me to realize that there were actually so many bad reviews on this dLux esc. I just couldn't agree more with those negative comments and reviews. Here's the video proof. https://youtu.be/Ej0BkiQWESI

Don't bother the 4 star ratings, without it, my review will simply disappear in the thin air! I gave it 0 star!

samsman | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2015

Too late for me to realize that there were actually so many bad reviews on this dLux esc. I couldn't agree more with those negative comments. Here's the video proof. https://youtu.be/Ej0BkiQWESI

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 22, 2015

facilmente programmabile e di grande affidamento....davvero un ottimo regolatore

Tim UK | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 25, 2015

Compared with its big brother on steroids - the Turnigy Dlux HV 250V, (that I bought shortly before this one), this high power, HV ESC is significantly more compact & only about a third of the weight, but still feels very solid & has good heat-sinking. Not the same overkill with the leads & connectors of its big brother either. All power-carrying leads are 10AWG, with the motor tails pre-terminated in gold 4mm females, while the power connections are tinned bare ends. Theres also, a thin anti-spark pre-connection lead on the positive side of the supply. ....... This HV ESC programs fine with the Turnigy Dlux programmer BUT - there are absolutely no relevant instructions supplied with the ESC or the Dlux programmer regarding connection to or how to use the programmer so you have to discover for yourself that this ESC (unlike many other BEC-less ESCs, including Turnigy K force series etc.) has to be connected to HV motor power (6s LiPo min) AS WELL as being supplied with 5v/6v on its "servo" lead (as per normal with non-BEC ESCs) before the programmer will talk to it.

Dean Blair | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 24, 2015

Great ESC, great price too... I have this wired up to the HK rotomax 50cc motor and seems to handle everything okay. The anti spark feature that comes with this ESC I haven't used, I just covered the bullet with heat shrink and shrunk it onto the red main wire lead. I have made a separate anti spark connector. I like it HK! Thanks a lot!!! :)

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 10, 2014

Received, but have not had a chance to use yet. Arrived greatly packed and looks great.

  1. 1
  2. 2
  3. 3
  4. 4
Klantbestanden
Rogero_Dlux160HV_Trex600E Download [1611]
Nick's Turnigy Dlux HV Programming Guide Download [192]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!