Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • USA

Turnigy Dlux 20A SBEC Brushless Speed ​​Controller w / datalogging (2s ~ 4s)

Turnigy Dlux 20A SBEC Brushless Speed ​​Controller w / datalogging (2s ~ 4s)

QTY:

Now save bewaar € 0,00 € 0,00

€ 15,13
Stock:
Gewicht:
40 g
SKU:
9192000026

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Product
Omschrijving

Turnigy® Dlux SBEC SER's hebben een nieuwe benchmark in kwaliteit en prestaties te stellen, zozeer zelfs dat deze lichtgewicht en zeer veelzijdige ESC kan tot 6s en + 10A barsten stroom met volledige gemoedsrust. De uitgebreide programmering en data logging functies bieden ook een veelzijdigheid aan toepassingen zelden gezien in een ESC van deze beoordeling. Alle Turnigy Dlux SER's kunnen worden geprogrammeerd via een programing kaart of door de zender. Duidelijk en gemakkelijk te begrijpen instructies zijn inbegrepen.

* Nu met data logging zichtbaar bij gebruik met Turnigy Dlux programmeren box.

Data logging scherm parameters:
Max Temperatuur
Omgevingstemperatuur
Max Current
min Current
Max Voltage
min Voltage
Nominale spanning
Uit Voltage
Motor Run Time
Power on Time
Motor Pole Number
Max Motor RPM
fout Times

Spec.
Max Cont. Current: 20A
Max Burst stroom: 30A
Max BEC Current: 2A
BEC Voltage: 5.5V
LiPo: 2 ~ 4S
NiMH: 5 ~ 12cells
Gewicht: 22grams
Max RPM (2-polige): 200,000rpm
Afmetingen: 51 x 27 x 11mm
Motor Plug: Female 3.5mm bullet Connector
Batterij Plug: Nil

Kenmerken.
Extreem lage interne weerstand
Zeer lage bedrijfstemperatuur
Te hoge temperatuur bescherming
APEC mosfets (Taiwain)

Programming Opties.
Batterij Type: 2S ~ 4S
Vooruit / achteruit
Zacht begin
LV Knip type (Negeren, verlaagt het stroomverbruik, Stop Motor)
LV Knip instelling (2,5 ~ 3,5 V in stappen van 0.1V)
Timing (Auto, Medium, High)
Switching (8,16kHz)
Factory Restore
Active RPM Controle: On / Off (Gouverneur Mode)

Fabrieksinstellingen.
Brake: off
Battery: LiPo Auto Detect
Low Voltage: 3.2V (power down motor)
Timing: Auto
Frequentie: 8KHz

Opmerking: Het programmeren box nu beschikbaar, controleer dan de gerelateerde items hieronder.

Product
Specifications

Aanvullende Informatie

  • Sku:
    9192000026
  • Brand:
    Turnigy
  • Gewicht ( g)
    40.00
  • Lengte
    110.00
  • Breedte:
    7.00
  • Hoogte:
    100.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
SimonK Firmware aufspielbar!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got this to go in my Radjet 800 (stock set up). It is just a shame that this ESC comes with such short wires.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Here's a late update to the previous review of the ESC:
Contacted HK CS to let them know the ESC wasn't working and they needed some "proof" of the failure. So I hooked all the electrical parts up and was getting ready to shoot a short video so the problem could be seen 'in action' as-it-were. Before I started the camera rolling the ESC started showing signs of life, the motor started spinning (under control of the servo tester) and then smoke and flames shot out of one end of the ESC. Whoops...
I forwarded photos (and a short video) of the damage and after a few more emails I received a full refund credit. I'm tempted to try another one but I'd like to read some success stories first.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received my ESC last Tuesday (01/22/2013) and 5 days later had an opportunity to fire it up. First I connected it to my Turnigy Programming Box and even though the display on the box lit up, I couldn't get any setting info to show. Thinking maybe my box was too old and the firmware outdated, I went directly for a quick test with a 1450Kv motor, 3S Nanotech pack and my Hitec HFP-20 servo programmer (as a signal source). No beeps or any other signs of life came fourth from the 20A, dlux ESC. There was power present from the built-in SBEC but that's all. It's dead...

And what's with the conflicting specification regarding the number of series LiPo cells it can handle? Is the number 4 or is it 6? Somebody has to get this info consistent. It's rather critical!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good ESC, I only did the programming with the programming box.
Easy to set up, also the cut off temperature can be programmed in a range from 90-105.
Very fine throttle response over the complete range.
Maximum cut of setting available is 3.2V on the one I have.

I took this one because of the data logging when used with Turnigy dlux programming box. Good to have data for an easy controll of the setup. I would appreciate the amps measuring with .1 steps, not only 5A or 15A for example.
Displaying the logged data works fine on the box.

For getting rough data (min / max. values) to check that the drive setup is in the correct range its OK. For detailed data on competition models I still prefer the SM-Modellbau data logger.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
No special comments. Just a ESC but together with its programing box, a nice and reliable combo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Lger, il faut maintenant tester sa durabilit
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very nice. .
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.