Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Turnigy Dlux 80A HV Brushless Speed ​​Controller (OPTO)

Turnigy Dlux 80A HV Brushless Speed ​​Controller (OPTO)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
153 g
SKU:
TGY_DEL80HV
Product
Omschrijving

Turnigy® Dlux SER's hebben een nieuwe benchmark in kwaliteit en prestaties in te stellen. Elke ESC maakt gebruik van een dubbele PCB ontwerp het scheiden van de motor voeding & MCU. Dit ontwerp zorgt voor een optimale component lay-out op elke PCB en biedt de ideale configuratie voor warmteafvoer en thermische efficiëntie. Beide PCB's zijn ingesloten in een volledig aluminium koellichaam behuizing voor maximale warmteafvoer te garanderen. Alle Turnigy Dlux SER's kunnen worden geprogrammeerd via een programing kaart of door de zender. Duidelijk en gemakkelijk te begrijpen instructies zijn inbegrepen.

Spec.
Max Cont Current: 80A
Max Burst stroom: 95A
BEC: N / A
LiPo: 6 ~ 12S
NiMH: 16 ~ 36cells
Gewicht: 112grams
Max RPM (2-polige): 200,000rpm
Afmetingen: 52 x 33 x 23mm
Motor Plug: Female 4mm bullet Connector
Batterij Plug: Nil
Kenmerken: Spark Eliminator Lead met 2mm Plug

Kenmerken.
Extreem lage interne weerstand
Zeer lage bedrijfstemperatuur
Te hoge temperatuur bescherming
APEC mosfets (Taiwain)

Programming Opties.
Batterij Type: 6S ~ 12S
Vooruit / achteruit
Zacht begin
LV Knip type (Negeren, verlaagt het stroomverbruik, Stop Motor)
LV Knip instelling (2,5 ~ 3,5 V in stappen van 0.1V)
Timing (Auto, Zeer laag, Laag, Normaal, Hoog, Zeer HGH)
Switching (8,16kHz)
Factory Restore
Active RPM Controle: On / Off (Gouverneur Mode)

Fabrieksinstellingen.
Brake: off
Battery: LiPo Auto Detect
Low Voltage: 3.2V (power down motor)
Timing: Auto
Frequentie: 8KHz

Opmerking: Het programmeren box nu beschikbaar, controleer dan de gerelateerde items hieronder.

Product
Specifications

Aanvullende Informatie

  • Sku:
    TGY_DEL80HV
  • Brand:
    Nee
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    153.00
  • Lengte:
    140.00
  • Breedte:
    27.00
  • Hoogte
    100.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased this speed controller after the one I wanted was out of stock. I am running 12s on a large turnigy aerodrive motor on a Sig Rascal 110 inch. I have not been able to get it to function with 12s. First I thought it was my solder connections, but I redid them all and they are good. I discovered it runs perfectly on one 6s battery. I am programming with the transmitter. Also, some of the description on this page is incorrect. It does not autosense cells and the timing only does automatic, medium and high. I am waiting on the programming box to get here. Maybe I will have better luck with that. If it ends up working on 12s I will amend my review. Right now I cannot use it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
as i have got the 55 low vloltage, i needed

a HV esc so i gave it a go.

Well All i can say it IS as good as a Castle

very smooth ran 8 cell on a AXI 4130/16

was over 2000watts very easy no drama, just got on with it

yes i would get another one
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used the programming box to set-up, running 12s @ 60A full load current, can't fault it prefer it to my Hobbywing 100A HV ESC. Very good value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Horrible. Lit on fire while on a SK3 6374. Burned my model down.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Running an APC 16x12 on 8 cells works perfectly. Have had not one issue with this esc for over 2 years now. Would buy again.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Eigentlich wrde ich dem Teil keinen eintzigen Stern verleihen. Nur nach zwei Rundflge ist das Teil abgeraucht. Schwach.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Does what it is made for. Runs on 10S and motor is smooth, regulation is linear and it seems to reach its specs. So as of now, good product.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works as it should. No issues so far. recomended product.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Der Regler arbeitet mit einem SK 6354/245 und 10S perfekt. Gutes Leerlaufverhalten.
Preis/Leistung passt. Wrde ich wieder kaufen
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am using this for my mountainboard. Don't buy those for your project if you don't have V-brakes. Braking with this esc will block your wheel. Overall good preformance on 10S with 2.7kW 6364 SK3. Smooth throttle response. I have aprox. 50km on my board and everything seems fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.