Turnigy G160 borstelloze Outrunner 245kv (160 Glow)

• Overall
• Quality
• Value

Powerhouse

Mar 15, 2022

Using this in a eleven pound Extra, has a ton of vertical and not too bad of battery life. I do not fly wide open all the time though.

• Overall
• Quality
• Value

Perfect

Oct 22, 2021

Runs just as stated perfect for my application and great price

• Overall
• Quality
• Value

Power Beast

Jul 03, 2021

Put this big boy in a giant scale ugle stick and in has plenty of power. Running it on 10s lipo and 110 amp ESC. with an 18 X 8 prop.

• Overall
• Quality
• Value

Perfect for the application

Mar 22, 2021

This lower KV motor replaces my original 295KV motor that was just running too fast on my 10s setup.
The 245KV has now got a 1" larger diameter prop and current draw has been lowerd. I am a happy man.

• Overall
• Quality
• Value

Good Price but not so happy with the Qualty

Feb 16, 2017

I have the G160 motor on a 80" super sport by great plans. Running a apc 20x13e prop. pulling 109 Am with a 120Am esc 10s 37v batters. Was running a 20x6 wood prop but under powered. With the 20x6 a lot of prop noise. The first flight with the 20x13 the motor lost 5 magnets. Motor never got hot.

• Overall
• Quality
• Value

Good Price but not so happy with the Qualty

Feb 16, 2017

I have the G160 motor on a 80" super sport by great plans. Running a apc 20x13e prop. pulling 109 Am with a 120Am esc 10s 37v batters. Was running a 20x6 wood prop but under powered. With the 20x6 a lot of prop noise. The first flight with the 20x13 the motor lost 5 magnets. Motor never got hot.

• Overall
• Quality
• Value

Good Price but not so happy with the Qualty

Feb 16, 2017

I have the G160 motor on a 80" super sport by great plans. Running a apc 20x13e prop. pulling 109 Am with a 120Am esc 10s 37v batters. Was running a 20x6 wood prop but under powered. With the 20x6 a lot of prop noise. The first flight with the 20x13 the motor lost 5 magnets. Motor never got hot.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 08, 2015

Can't be the price for larger models - and the same power as you know who's 160 motor.... Great value!

• Overall
• Quality
• Value

Customer Rated

Dec 07, 2012

Great motor!

100A ESC, 10S 4500Mah (25C) with 19/10 wood prop draws 60A and 2450W, with 16/8 3-blade prop draws 48A with 2100W. Motor barely gets warm. Great torque and power! What a pleasure!!! :)

• Overall
• Quality
• Value

Customer Rated

Sep 28, 2012

I have not run up yet but i have to say that the screws to attach the ali drive unit were too short and i have now to purchase some to do the job and i wonder if the rest of your stock is the same.. The thread on the shaft could be longer as most elec props areb slim and the drive end is smooth which will be a problem when you tighten th prop.