Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global

Turnigy Integrated PCB Micro-Hex (KIT)

Turnigy Integrated PCB Micro-Hex (KIT)

QTY:

Now save bewaar € 0,00 € 0,00

€ 18,01
Stock:
Gewicht:
308 g
SKU:
9332000004

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
battery
acc
Product
Omschrijving

Deze kleine maar briljant ontworpen micro-Hex beschikt over een geïntegreerde PCB frame, gewoon bout op de motoren dan soldeer uw keuze van 6A ESC direct aan het frame!

Een geïntegreerde stroomverdeling systeem is ook opgenomen voor het maken van een van de leukste elektronica installeert rond. Alle bevestigingsmateriaal en het frame onderdelen zijn opgenomen in de kit. Alles wat u nodig heeft om dit kleine monster in de lucht te hebben, is zes Turnigy T1811-2900kv motoren, zes 6A SER, een set van 5x3 Micro-quad props (3 met de klok mee en 3 tegen de klok in) een 800mAh 2s 7.4V LiPoly batterij, een HobbyKing Multi-rotor control board en je eigen zender en ontvanger (Tx / Rx).

Kenmerken:
Lichtgewicht ontwerp.
Geïntegreerde printplaat voor nette installatie van onderdelen.
Inclusief een volledige set van frame en bevestigingsmateriaal.

specs:
Flying Gewicht: 145g (exclusief RX en batterij)
Breedte: 250mm
Lengte: 85mm

Vereiste:
6 x Turnigy T1811-2900kv
6 x 6A ESC
6 x 5x3 Prop (3CW & 3CCW)
1 x HobbyKing Multi-Rotor Control Board
1 x 800mAh 2s 7.4V LiPoly batterij
24 x M2x8 Bouten (voor motor)
24 x M2 borgmoeren (voor motor)
Uw eigen zender en 4 kanaals ontvanger.

Product
Specifications

Aanvullende Informatie

  • Sku:
    9332000004
  • Brand:
    Turnigy
  • Gewicht ( g)
    308.00
  • Lengte
    340.00
  • Breedte:
    20.00
  • Hoogte:
    330.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Good kit, but not click together. Used medium cyano on some of the parts
Quality
Value
Overall
Quality
Value
Overall
Nice compact quad. What more at .99
Quality
Value
Overall
Quality
Value
Overall
this is my first multi roto so very new to me
Quality
Value
Overall
Quality
Value
Overall
Amazing! My favorite build yet. I am VERY new to this hobby (still a toddler, if you will), but everyone that saw this hex fly was impressed, and I think a little afraid of it due to it's speed and noise factor. I used a naze32 board (with no tuning), a set of six 1804-2400kv motors, six 10 amp simonk esc's, and 5030 two leaf props. I ran mine in a Hex mode. Super fast and very maneuverable. I crashed about three times from wires breaking off of the solder joints on the pcb frame. I had used motors from a previous build, plus two new ones, so maybe I had vibration issues. Next time I will use heat shrink and solder wires together directly instead of using frame. Adding a pcb on bottom with a couple cushion pads might be best, with having six motors that close together sending vibration through the frame and what not. Buying a bunch more of these! Hope this helps!!!
Quality
Value
Overall
Quality
Value
Overall
I bought 2 kits and made 1 hex. The frame is really bendy unless you use x2 landing triangles to support each arm. It stiffens it up without adding too much weight. I use 1811-2000KV motors on 3S and 5030 props. It handles it fine! Loads of backdraft with 6 motors spinning - fun fun! :)
Quality
Value
Overall
Quality
Value
Overall
ce microhexa est simple construire, j'ai utilis les moteurs recommands 1811/2900kv les esc 6A une kk2 et un microrecepteur dsm2 R410 pour spektrum
une difficulte tout de meme pour inserer les helices 5030 en force, j'ai utilise une pince reglable en appuyant doucement bien dans l'axe, prevoir 1 ou 2 paquets d'avance elle peuvent se fendre
sinon vols impeccable sans toucher au reglage usine de la kk2 juste baisser le stick scaling throttle vers 60 pour etre moins sensible sur les gaz
au decollage sans stabilisateur cela bouge pas mal avec l'effet de sol puis c'est vif mais tres controlable; avec stab c'est du gateau
pour les batteries j'avais des 800 qui tiennent 4 mn environ , avec une 1200 j'ai fait 7 mn ( 1 seul vol ce jour), je n'ai pas test de 1600
Quality
Value
Overall
Quality
Value
Overall
Achet pour remplacer le chassis de mon quad (achet en prt voler).

Ensemble de bonne qualit, mais un peu fragile.
Quality
Value
Overall
Quality
Value
Overall
Today I've got my frame.

Well, from the first sight it's nothing of Rocket Sience, but I liked it. Very well laser cut.
Couldn't help stop soildering ESC's on board. With six plush onboard it looks pretty attractive. If you do everything right, ESC's go fully covered in frame.
It's too late today, but "to be continued..."
Quality
Value
Overall
Quality
Value
Overall
Nice little frame,very easy to mount with the PCB,but the motor mount are fragile ,there is a way to reinforce them ,you can put 10mm spacer ate the etwenend of the motor mount and put a plate betwen the spacer and the lower centerplate (I put 2 pictures in the file section) in the same time you will lower a lot th vibrations of the engines.Another clener way to do it :buy 2 frames and put the second PCB as lower centerplatewith 10mm plastic spacer
Quality
Value
Overall
Quality
Value
Overall
This thing is really cool! I used the recommended motors, props and ESCs. However, instead of using a Hobby King control board, I used the KK2.0 board. I have this same board on a different quad copter and it is fantastic. It's a snap to set up on this little hexacopter and it bolts right up. I bought some nylon standoffs for the control board. I'm using Turnigy Nano-Tech 2S 1000mah batteries and this thing flies great!
Quality
Value
Overall
View all reviews
Upload
Videos
  • Turnigy PCB Hex

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.