New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy K-Force 40A Brushless ESC

Turnigy K-Force 40A Brushless ESC

Discontinued Product

Please continue searching for a similar product.
Gewicht:
73 g
SKU:
KF-40A
WANT FREE SHIPPING? Click here to find out more!

De serie Turnigy K-Force is gebaseerd op een geheel nieuwe krachtige microprocessor meestal gereserveerd voor high speed auto ESC. De nieuwe CPU betekent ultra snelle synchronisatie timing, scherpere gasrespons, minder batterij lading en verminderde FET warmteontwikkeling.

specificaties:
Output: Continue 40A
Input Voltage: 2-6 cellen (5-18 cellen NiMH)
BEC: Twin voltage selectie, 5.25V en 6V.
Controle Signaaloverdracht: Optisch gekoppeld systeem.
Grootte: 59mm (L) * 27mm (W) * 12mm (H).
Gewicht: 38g.

Maximale snelheid;
2 Pole: 210,000rpm
6 Pole: 70,000rpm
12 Pole: 35,000rpm

Kenmerken:
High performance microprocessor (24kHz)
Heatsink ontworpen dissipatie warmte snel.
Verbeterde Normaal, zacht, zeer-Soft start modes
Compatibel met vliegtuigen en helikopters.
Glad, lineaire, snelle en nauwkeurige reactie op het gaspedaal.
Meerdere beveiligingsfuncties: Low-voltage bescherming cut-off / Over-bescherming tegen hitte / Throttle signaalverlies bescherming
Gouverneur-modus voor helikopter.
De firmware van de ESC kan bijgewerkt worden via de USB-adapter.
De gebruiker te programmeren via Tx, Programmering kaart of PC USB-poort.
Niet compatibel met non 'K-Force' esc programmering kaart.

  • Sku KF-40A
  • Brand Turnigy K-Force
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 73.00
  • Lengte 150.00
  • Breedte 14.00
  • Hoogte 112.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The quality as expected BUT HOBBYKING makes people confused, as they this this product "programmable via Tx, Programming card or pc USB port." but to program by USB port yo must have the programming Card....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The quality as expected BUT HOBBYKING makes people confused, as they this this product "programmable via Tx, Programming card or pc USB port." but to program by USB port yo must have the programming Card....

I use it in mini eco expert racing boats and it still good, I have it 2 years and still the best

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use it in mini eco expert racing boats and it still good, I have it 2 years and still the best

Flew it with a 3s battery on a bixler a while a ago for a few times. After i put it in storage for a year i decided to test it as i usually do just to keep the stuff fresh. After connecting everything i revved it up on a testbench and i noticed instantaneously that it got very hot while applying only 20-30pcnt power on 3s. I pulled the power out and let it cool for a minute. After that i tried again and it bursted in smoke! If i had it in a plane it would have burned up the whole thing. Luckily it was on my test bench. Worked awsome as long as it lasted until it decided to kill itself in smoke. Nothing i would use on expensive systems. Only for some cheep epo stuff without expensive equipment.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flew it with a 3s battery on a bixler a while a ago for a few times. After i put it in storage for a year i decided to test it as i usually do just to keep the stuff fresh. After connecting everything i revved it up on a testbench and i noticed instantaneously that it got very hot while applying only 20-30pcnt power on 3s. I pulled the power out and let it cool for a minute. After that i tried again and it bursted in smoke! If i had it in a plane it would have burned up the whole thing. Luckily it was on my test bench. Worked awsome as long as it lasted until it decided to kill itself in smoke. Nothing i would use on expensive systems. Only for some cheep epo stuff without expensive equipment.

These things are awesome. The governor issue with hthe others needs to be flashed with blheli using arduino uno. I use these on my bigger rigs with high poles and low kv motors w/o heat. ONLY issue is the amount of noise on the gps frequency in some cases knocking out gps signal (bad bec) just disable bec. These are hobbywing platinum esc.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These things are awesome. The governor issue with hthe others needs to be flashed with blheli using arduino uno. I use these on my bigger rigs with high poles and low kv motors w/o heat. ONLY issue is the amount of noise on the gps frequency in some cases knocking out gps signal (bad bec) just disable bec. These are hobbywing platinum esc.

good quality. Comes with motor connectors. Have to get a programming box to change parameters if you chose.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good quality. Comes with motor connectors. Have to get a programming box to change parameters if you chose.

Mont sur un HK450, aucun problme, la configuration avec la radio est un peu particulire et je ne m'y tenterai pas, j'ai utilis le cble USB avec le programme Hobbywing et aucun problme. Fonctionne trs bien avec un Turnigy Typhoon 2218.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mont sur un HK450, aucun problme, la configuration avec la radio est un peu particulire et je ne m'y tenterai pas, j'ai utilis le cble USB avec le programme Hobbywing et aucun problme. Fonctionne trs bien avec un Turnigy Typhoon 2218.

This ESC is pretty great. The very soft start is 8 secs so you won't have a problem with that, and it barely gets warm during usage. I highly recommend NOT buying any programming card, because programming with tx might be a little scary at first but it's really really easy and fast. The usb programmer might be useful for fw updates, but I'm happy with its current state already.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This ESC is pretty great. The very soft start is 8 secs so you won't have a problem with that, and it barely gets warm during usage. I highly recommend NOT buying any programming card, because programming with tx might be a little scary at first but it's really really easy and fast. The usb programmer might be useful for fw updates, but I'm happy with its current state already.

Great ESC. I haven't had any problems programming this using the Turnigy Multifunction LCD Program Box. Works great every time. Haven't had it get hot and I have given it a fair bit of stick. All around great ESC!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great ESC. I haven't had any problems programming this using the Turnigy Multifunction LCD Program Box. Works great every time. Haven't had it get hot and I have given it a fair bit of stick. All around great ESC!

No consegui ativar o modo soft start, mesmo com o carto de programao. Minha compra foi frustrada, j que o principal motivo do pedido foi ter uma acelerao inicial lenta. J tentei fazer pelo rdio Turnigy e tambm no tive sucesso. Acho que o produto est com algum problema de srie. No gostei da compra. Estou arrependido.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No consegui ativar o modo soft start, mesmo com o carto de programao. Minha compra foi frustrada, j que o principal motivo do pedido foi ter uma acelerao inicial lenta. J tentei fazer pelo rdio Turnigy e tambm no tive sucesso. Acho que o produto est com algum problema de srie. No gostei da compra. Estou arrependido.

No consegui ativar o modo soft start, mesmo com o carto de programao. Minha compra foi frustrada, j que o principal motivo do pedido foi ter uma acelerao inicial lenta. J tentei fazer pelo rdio Turnigy e tambm no tive sucesso. Acho que o produto est com algum problema de srie.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No consegui ativar o modo soft start, mesmo com o carto de programao. Minha compra foi frustrada, j que o principal motivo do pedido foi ter uma acelerao inicial lenta. J tentei fazer pelo rdio Turnigy e tambm no tive sucesso. Acho que o produto est com algum problema de srie.

Customer files
Navod CZ Download [410]
No File Name Download [646]
No File Name Download [646]
No File Name Download [646]
No File Name Download [646]
TURNIGY_K-FORCE-Series 40A_S1 Download [962]
TURNIGY_K-FORCE-Series 40A_S2 Download [845]
No File Name Download [962]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!