New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy L2815H borstelloze 450 Heli Motor 3450kv (430W)

Turnigy L2815H borstelloze 450 Heli Motor 3450kv (430W)

Shipped From:
  • USA
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 12,28
status:
In voorraad
SKU:
244000002
WANT FREE SHIPPING? Click here to find out more!

Turnigy L2815H-3450 Brushless Heli Motor (400w) 450 formaat Heli

Spec.
RPM / V: 3450 KV
Voltage: 11.1V (3S)
Geen belasting Current: 2.6A
Max stroom: 42A
Max Power: 430W
Shaft Grootte: 3.175mm
Shaft Lengte: 18mm
Afmetingen: 28mm x 36mm
Thrust: 600g
Gewicht: 66g

  • Sku 244000002
  • Brand Turnigy
  • Gewicht 108.0000
  • Lengte 94.00
  • Packaging Width 45.00
  • Hoogte 53.00
  • Kv ( tpm / v ) 3450.00
  • Max Currents (A ) 42.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 11.00
  • Vermogen ( W) 430.00
  • Shaft A ( mm ) 3.18
  • Lengte B ( mm ) 36.00
  • C Diameter ( mm ) 28.00
  • Kan Lengte D ( mm ) 17.00
  • Totale lengte E ( mm ) 54.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

small, good! works wonders in boats that needs more torque

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

small, good! works wonders in boats that needs more torque

i got on of these & put it in my mini titan, 3 cell turnigy batt., & a 55 dlux esc. i dont do 3d, after i got everything set up every thing runs a little more than room temp. plenty of power, & good price!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i got on of these & put it in my mini titan, 3 cell turnigy batt., & a 55 dlux esc. i dont do 3d, after i got everything set up every thing runs a little more than room temp. plenty of power, & good price!

Running this on a 450 pro clone, with nanotech 2200 35-70c on a 13t pinion, a yge 45a speed controller..governed at 85pcnt throttle I run it for about 4.30. I bring it down and I reckon I could cool an egg on it! A nice loose mesh too.. This one just doesn't have the power for much more than hovering, very slow punch out even at 100pcnt throttle . Gets too hot, not a great 450 motor, would probably do better on a 400 size..shame, because it looks nice, wires are a bit stuff too.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Running this on a 450 pro clone, with nanotech 2200 35-70c on a 13t pinion, a yge 45a speed controller..governed at 85pcnt throttle I run it for about 4.30. I bring it down and I reckon I could cool an egg on it! A nice loose mesh too.. This one just doesn't have the power for much more than hovering, very slow punch out even at 100pcnt throttle . Gets too hot, not a great 450 motor, would probably do better on a 400 size..shame, because it looks nice, wires are a bit stuff too.

Reasonably well made. Gets a little too hot while testing on the bench, runing 3s.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Reasonably well made. Gets a little too hot while testing on the bench, runing 3s.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!