Become a Dealer Blog
Registreren

Totale prijs

US$ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy L3040A-480G borstelloze motor

Generating Links

Turnigy L3040A-480G borstelloze motor

 
Prijs:

Now save bespaar US$ 0,00 US$ 0,00

US$ 20,15
Al gekocht Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
L3040A-480G
Geen verzendkosten? Klik hier meer leren!
Turnigy L3040A-480G borstelloze motor

specificaties:
Afmetingen: 38mm x 46mm
Gewicht: 194g
Kv: 480rpm / V
Voltage: 22.2V (6s)
Max Power: 1000w
Max stroom: 52A
Geen belasting Current: 0.8A
Diameter van de schacht: 5mm
Thrust: 2100G
ESC: 60A ~ 80A
 
  • Kv ( tpm / v ) 480.00
  • Max Currents (A ) 52.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 22.00
  • Vermogen ( W) 1000.00
  • Shaft A ( mm ) 5.00
  • Lengte B ( mm ) 46.00
  • Can Diameter C ( mm ) 38.00
  • Kan Lengte D ( mm ) 30.00
  • Totale lengte E ( mm ) 65.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

David | Geverifieerde koper

  • Overall
  • Quality
  • Value

Great motor, but needs some improvements.

Dec 08, 2016

I have tested three of these motors over several years on 3.5 to 5 lb airplanes. It is an excellent motor in it's power output vs efficiency and weight. It has some slight cogging vibration and could use better bearings. Better yet tweek the cogging out, put better bearings in, balance it, include a mount and can end prop adapter. Charge an appropriate price increase, I'll pay it with that tweeked out. I just can't seem to find anything else that does the same job.

zedooo | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 25, 2013

Sick motor! I don't know why is it so cheap!

acrozic | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 25, 2013

Got the motor and tried it on several batteries with different loads.
Very low efficiency motor on 4S battery - 450W 4S 17x8 or 500W 4S 16x10. Gets worm and power drops slowly. also gets very worm on 6S 13x8 700W.
Expected better :(

acrozic | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2013

Just got the motor.
4S 17x8 ~500W
5S 17x8 ~600W
6S 15x8 ~600W
The motor gets hot. I will try the first combination on my YAK54 ~1.8Kg and wingspan of 1.4m. hope it will last ...

Napstr | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 25, 2013

Wow a light weight powerhouse! Is a very light motor for the output and runs at high voltage so gains efficiency seems well balanced and smooth - just goes like stink.

bearcatcrazy | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 15, 2012

static ground test : 31 Amps on 6S with 13x6.5 APCE, motor gets fairly warm after 1 minute but generates a lot of thrust ! Reversed the shaft because I did not trust the small C clip.
Flight report scheduled for tomorrow.

JaroEDF | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 23, 2012

Shaft is pretty soft, it bends pretty easy. Fortunately it is no problem to buy spare shaft in my local shop. Engine cannot handle 1000W, it overheat way too much. 800W is maximum for this motor on 6S.

Steve_B | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 11, 2012

A real powerhouse on 6 cells. Using a Xoar 15x8 in static test I get:
45A
1060W
8300RPM
Approx 9lb thrust

In flight peak power was 965W and current 41.6A.

i had reservations about all that thrust being transmitted only though the little c-clip that hold the shaft in, so i reversed the shaft and put a bolt on prop adapter on (motor has drilling for one) and used a retaining collar on the back.

Steve

ROCCO | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 21, 2012

ottimo motore ho provato con una 15 X 8 ho ottenuto un tiro di 3.3 kg

con circa 800 w

con una 14 x 7 ho ottenuto 2.8 kg e 700 w circa

necessita' pero' comperate a parte il mozzo e il supporto motore

nicola | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jan 22, 2012

Ottimo motore l'ho montato sia su un extra 300 della Kyoshio sia sul mio Yak 54 carbon zeta con regolatore Turnigy da 85 ampere spinge tanto che gli aerei vanno su a candela alla stessa velocit dell'orizzontale lo consiglio a tutti.

  1. 1
  2. 2
Klantbestanden
Front view Download [654]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!