New Items Nieuws Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy Mach2 13.5T Brushless R / C Auto Motor w / timing aan te passen 2550Kv

Turnigy Mach2 13.5T Brushless R / C Auto Motor w / timing aan te passen 2550Kv

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
MACH2-13-5T
WANT FREE SHIPPING? Click here to find out more!
Turnigy Mach2 Brushless R / C Auto Motor w / timing aan te passen.
Deze borstelloze 540 formaat R / C auto motor heeft een ingebouwde sensor en verstelbare timing.
specificaties:
Afmetingen: 53mm x 36mm (43mm w / Batt-terminal), 70mm (met as)
Gewicht: 204g
Diameter van de as: 3.17mm
Lengte van de voorste as: 15mm
Kv: 2550rpm / v
Vermogen: 205W +
Cellen: 4-7NiMh / 2-3S LiPoly
Gesinterde Magneet NdFeB
sensor draden
  • Sku MACH2-13-5T
  • Brand Turnigy
  • Gewicht 243.0000
  • Lengte 90.00
  • Packaging Width 45.00
  • Hoogte 50.00
  • Kv ( tpm / v ) 2550.00
  • Max Currents (A ) 0.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 11.00
  • Vermogen ( W) 0.00
  • Shaft A ( mm ) 3.00
  • Lengte B ( mm ) 53.00
  • C Diameter ( mm ) 36.00
  • Kan Lengte D ( mm ) 41.00
  • Totale lengte E ( mm ) 69.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

It's an ok motor. However, the magnet on the rotor keeps separating. Had to super glue it back about 5 times. They need to come up with a better way of securing the magnet to the rotor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's an ok motor. However, the magnet on the rotor keeps separating. Had to super glue it back about 5 times. They need to come up with a better way of securing the magnet to the rotor.

Make sure you remove all the front and back bell housing screws and paint them with Locktite. They will fall out on the track! It's not a question of if. Label also suffers from fading as it's a cheap print so if you want to keep it looking fresh, good luck...apart from the cheap aspects, good speed and power from this. Works great with 3s packs too.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Make sure you remove all the front and back bell housing screws and paint them with Locktite. They will fall out on the track! It's not a question of if. Label also suffers from fading as it's a cheap print so if you want to keep it looking fresh, good luck...apart from the cheap aspects, good speed and power from this. Works great with 3s packs too.

Hi, just got this motor, goes well, not as fast as the standard one in the new PUK RC trucks in eBay. It is smoother and quieter. Will put a video on today . Over all the finish is fantastic. Gets extremely hot, even with heat sink fins on it. Will leave moor as the week goes by to see how it holds up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi, just got this motor, goes well, not as fast as the standard one in the new PUK RC trucks in eBay. It is smoother and quieter. Will put a video on today . Over all the finish is fantastic. Gets extremely hot, even with heat sink fins on it. Will leave moor as the week goes by to see how it holds up.

brought this motor for touring car racing, but its under powered compared to high quality motor's,

description says timing adjustable, but this is not possible by turning the end bell,

5 stars for the price, 1 star for timing issue power output,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

brought this motor for touring car racing, but its under powered compared to high quality motor's,

description says timing adjustable, but this is not possible by turning the end bell,

5 stars for the price, 1 star for timing issue power output,

Works great in my B4 And never gets hot

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great in my B4 And never gets hot

motor de bajas vueltas ideal para coches que no necesiten mucha potencia o circuitos revesados

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

motor de bajas vueltas ideal para coches que no necesiten mucha potencia o circuitos revesados

Buena relacin calidad precio, montado en un 3Racing F1-09 con un rendimiento muy bueno, variador de 100A, unicamente funciona bien con el sensor conectado, si no tena tirones al iniciar la marcha, muy recomendable.., saludos From Spain.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Buena relacin calidad precio, montado en un 3Racing F1-09 con un rendimiento muy bueno, variador de 100A, unicamente funciona bien con el sensor conectado, si no tena tirones al iniciar la marcha, muy recomendable.., saludos From Spain.

for the people with sensor problems....try repinning the sensor wires to fix this. there's not really an "industry standard" for sensor wires...so occasionally you have to play around with them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

for the people with sensor problems....try repinning the sensor wires to fix this. there's not really an "industry standard" for sensor wires...so occasionally you have to play around with them.

this motor is very good for the price

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this motor is very good for the price

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking