Become a Dealer Blog
Registreren

Totale prijs

US$ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy Marine 180A BEC waterdichte snelheidsregelaar met Water Cooling

Generating Links

Turnigy Marine 180A BEC waterdichte snelheidsregelaar met Water Cooling

 
Prijs:

Now save bespaar US$ 0,00 US$ 0,00

US$ 107,93
Al gekocht Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
9020000034-0
Geen verzendkosten? Klik hier meer leren!

De Turnigy Marine waterdichte speed controllers zitten vol met de nieuwste technologie en zijn er up bij sommige van de beste op de markt van vandaag. Deze regelaars hebben de ultieme IP67 bescherming (Ingress Protection) bereikt, dit is de standaard die elektronische apparaten worden getest. De 6 op de IP-classificatie betekent dat het "Totaal beschermd tegen stof", de 7 op de IP-classificatie betekent dat het "Beschermd tegen onderdompeling tussen 15cm en 1m.

De Turnigy Marine snelheid controllers worden geleverd met een "Copper Bar Heat Technology" water koelsysteem (exclusief gepatenteerd) en extreem lage interne weerstand MOSFET's. Elke kamer heeft een speciaal ontworpen software die uitstekende start-up en de acceleratie beschikt, hebben ze een uitstaand bedrag van "punch" bij coming out van bochten bij gebruik in hoge snelheid boten. Een waterdichte aan / uit schakelaar is gemonteerd, zodat u kunt aansluiten van de batterij af te dichten dan het luik, kan de radio vervolgens worden ingeschakeld wanneer je klaar om te gaan.

2 loopt modi kunnen worden geselecteerd, ofwel naar voren alleen of vooruit en achteruit. De regelaars hebben ook meerdere beveiligingen, zoals aangegeven in de lijst met functies hieronder. De programmering van de vele functies van de regelaar is eenvoudig te doen met behulp van de zender.

Kenmerken:
• Gepatenteerde water koelsysteem
• Uitstekende start en acceleratie
• Zakken van "punch" bij het accelereren uit bochten
• Uitgerust met waterdichte aan / uit schakelaar
• 2 running modi kunnen (vooruit of alleen vooruit en achteruit) worden geselecteerd
• Programmeerbaar via de zender
• Programma modes: lopende wijze, LiPoly celgetal, laag voltage cut-off, timing
• bescherming Oververhitting
• Laag voltage cut-off bescherming
• bescherming Signaalverlies

specs:
Input Voltage: 2 ~ 6 LiPoly cellen (6 ~ 18 NiMH)
Continue Current: 180A
Burst Current: 1080A
BEC Type: Schakelen met aan / uit schakelaar
BEC uitgang: 6V @ 5A
Motor Connectors: 6mm
Servo lood: JR stijl
Servo Kabellengte: 300mm
Waterkoeling Pipe: 3mm I / D ~ 5,4 mm O / D
Afmetingen: 72x48x36.6mm
Gewicht: 245g

Let op: Deze regelaar is niet voorzien van een batterij connector.

  • Miss Geico 29,ESC180A Turnigy, moteur Dynamite2000kv,Lipo2x3s 5,5A, INDRE ET LOIRE VALLEY
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

CENDRO | Geverifieerde koper

  • Overall
  • Quality
  • Value

Valeur sure

Apr 18, 2018

Fort, fiable ras ...

O. W. | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good, but only 2 caps on the wires?

Nov 28, 2017

First impression is good. But... The esc has only 2 caps on the powerleads? On the pictures it looks like there are more on it. I have not installed it in my boat yet so can't give a proper review so far. Anyone else tried the version with the 2 big caps on the leads yet?

Zooma | Geverifieerde koper

  • Overall
  • Quality
  • Value

Looks Good.

Sep 13, 2017

My first impression when opening the box was that this is a very impressive looking bit of kit that comes with plenty of good reviews.
I bought this speedo for use in my Pursuit so it should be more than adequate and leave some "in reserve" that may be handy if I decide to upgrade the motor and/or cell count in the future.
The plugs that came on the motor that is fitted in the Pursuit were too small to fit those that are fitted to this speed controller but fortunately the speedo came with a spare set of 3 matching plugs (complete with colour coded heat shrink).
I removed the plugs from the motor and soldered-on the bigger ones - but then found that they did not fit into the speed controllers sockets!!!!
After about an hour of very careful sanding with fine emery cloth (and constant check fitting) I eventually had the plugs fitting smoothly (but tight) into the speed controllers sockets.
I now have everything fitted into my Pursuit and when connected up the speed controller worked immediately and the motor was turning in the correct direction - so all good so far.
The auto set-up was a surprise but I wanted to program the unit to make sure I had full throttle and to remove the reverse function.
So far the speed controller has refuse to accept any programming commands from the RadioLink transmitter so I will keep trying and maybe buy a programming card as I do want to get the best out of this speed controller and to make full use of its built-in functions.

peter | Geverifieerde koper

  • Overall
  • Quality
  • Value

8 out of 10

Jun 14, 2017

Seems to be working well but shuts down over 120 amps with green light flashing, doesnt feel too hot. Maybe the 180 amp rating is a bit optimistic?

Johan | Geverifieerde koper

  • Overall
  • Quality
  • Value

180

May 28, 2017

It is impossible to program this ecu with the transmitter, I can't enter the programming mode. When I run the boat it will only run for a couple of seconds before it shuts down and you have to go back to neutral position to start the engine again.

Rogier | Geverifieerde koper

  • Overall
  • Quality
  • Value

Marine 180A v3

May 10, 2017

I bought this ESC for my 820mm boat, it is very easy to install in the boat. (use super velcron) But to program it by using your transmitter a whole different ball game. I would def. recommend a programbox whit this ESC. Then you know for 100% sure your settings. I run it whit a 2200KV and it is like superfast. For the price their isn't any better for >800mm boats.

Rogier | Geverifieerde koper

  • Overall
  • Quality
  • Value

Marine 180A v3

May 10, 2017

I bought this ESC for my 820mm boat, it is very easy to install in the boat. (use super velcron) But to program it by using your transmitter a whole different ball game. I would def. recommend a programbox whit this ESC. Then you know for 100% sure your settings. I run it whit a 2200KV and it is like superfast. For the price their isn't any better for >800mm boats.

Daniel | Geverifieerde koper

  • Overall
  • Quality
  • Value

excellent product

Dec 12, 2016

easy to configure without a programming card
100% waterproof
a must have upgrade for any fast boat
get one.......

boboday | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 21, 2016

one of the best ESC for marine RC boats

Robin | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jan 10, 2016

This is the best ESC for boats over 800 mm. I have bought 5 because they are 100pcnt waterproof, tough, plenty of capacitors for long leads and have terrific punch. Don't hesitate - buy it.

  1. 1
  2. 2
Klantbestanden
TGY Marine Manual Download [3044]
Firmware Download [472]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!