Become a Dealer Blog
Registreren

Totale prijs

US$ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy MEGA 380W Lithium Polymer Battery Charger

Generating Links

Turnigy MEGA 380W Lithium Polymer Battery Charger

 
Prijs:

Now save bespaar US$ 0,00 US$ 0,00

US$ 77,49
Verzonden vanaf:
  • USA
  • Global
Al gekocht Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
T380W
Geen verzendkosten? Klik hier meer leren!

Bent u klaar voor 380W en 20A Het tarief voor uw hoge C laadstroom staat Turnigy / Zippy packs? We weten dat het antwoord "ja!", Dus we bieden u de Turnigy Mega 380W high power balans lader!

De Turnigy Mega 380W is een high power balanceren lader / lozer die kan omgaan met 6 cellen LiPo / LiFe en NiMH / NiCd tot 18S nauwkeurig. Gebundeld met de Turnigy Mega 380W is een array van het opladen van kabels en stekkers, geschikt voor de meeste toepassingen.


Kenmerken;
microprocessor gestuurde
Delta-peak gevoeligheid (NiMH / NiCd)
Individuele cel balancing lading en ontlading
Li-ion, LiPo en LiFe staat
Ni-Cd en NiMH die in staat
High-power en high-performance circuit
Store-functie, maakt het mogelijk veilige opslag huidige
data-opslag (Sla tot 10 verpakkingen in het geheugen)
Cyclische laden / ontladen

Opmerking: De temperatuur sensor niet inbegrepen.

Spec.
Ingangsspanning: 11,0 - 18.0Volt
Laadstroom: 0,1 - 20.0A
Ontlaadstroom: 0.1 - 5.0A
Maximale laadcapaciteit: 380W @ ingangsspanning> 15V
Maximale afvoercapaciteit: 25W
De huidige afvoer voor het balanceren van Li-Po: 200mAh / cell
Lithium (LiPo / LiIo / Life) batterij celgetal: 1-6 serie
NiCd / NiMH-accu celgetal: 1-18 serie
Pb accuspanning: 2-24V
Batterij setup herinneringen: 10
Intelligent temperatuurregeling: Ja
Gewicht: 762g
Afmetingen: 152X145X57mm

waaronder;
1 x Turnigy Mega 380W oplader
1 x Banana Plug w / XT60
1 x Banana Plug w / Aligator Clips
1 x XT60 Lead w / Vrouw Mini JST, Female Futaba en Glow Ignitor Plug
1 x Paar Alligator Clips
1 x JST XH Adapter

Deze lader heeft een JST-XH balancing plug, die compatibel is met Zippy, Turnigy en geen verpakking met een JST-XH balans lead maakt.

Let op: Voeding en temperatuursensor niet inbegrepen.

  • Turnigy 380w Mega Charger
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

dantheflyingman | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 15, 2013

So ive had this charger for about a week now and ive decided to post this review, my conclution on this charger is



-The build quality is amazing, encased in a full metal shell this feels sturdy and solid

-No power leaks, dont get shocked ever time u tought the charger like accucel 6 and 7

-Lives up to the 380w output and can charge 4s for me at 20A

-Simple to use, the buttons feel good to the touch and the firmware is easy to use and navigate around

-Comes with ample amount of charging leads and accessories, including a cool balance board



So overall a great charger for an even greater price and i would have to rccomend this charger to anyone out there!!

Great stuff hobbyking

Imprez | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 08, 2013

How can I start... I receieved this charger last week. It uses same program than imax B6 and all of those small chinese chargers, it's very easy and intuitive to use.

The real power of this charger is 240Watt at 12v... to get its 380 watt you must use 18v input and i don not know much supplies with 18v outpout.

Balancer its not much accurate, in a storage charge of a zippy 5Ah 20c 2s it remains one cell at 3.8v and the other at 3.79v, so its integrated balancer seems not much accurate. You'd better use one external for expensive batteries.

I charged Lead acid batteries at 0'1c and 0'05C, dont forguet deactivate the timer limitator and capacity limitator for huge batteries, those are preconfigurated to 120min and 5000mAh. This charger works fine with Pb.

Am very sorry but I still didn't charged any nimh so i can not review that.

Charger comes with some connectors as shown in the image.

The biggest deffect I can find is that the fan is very noisy and if it starts, always work at full power, so you cant sleep while charging batteries at high power (actually is not recommended lol).

I can find that the piece to connect 2. 3. 4. 5 or 6s to balancer is completly useless: you can connect the battery balancer plug directly to the charger while the negative pin must be always first, check it with the tester before do this.

However i have any battery that can't be charged up t

Roger-DK | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 01, 2013

Just says connection break. I tried three different cables and batteries without luck. It will cost me more to send this back than what I would get refunded! Waste of my hard earned money... :(

peter2482 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 16, 2012

Works as it should. Using a pc power supply. Only negative is, the fans are very noisy. Other than that it seems to be a great charger

Cheetor | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 11, 2012

Been a very good charger for me. does a great job at charging my electric bike batteries. pumps out the power!. But boy is she loud, I guess those loud fans are needed with the kind of power it delivers, just make sure you get a nice big power supply for it. I'd definitly buy it again very good value for money.

Don | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 12, 2012

The charger arrived today , 12 days to new zealand, great and well packed.
There have been two issues already the supply lead is way too short, I had to add a meter of (two core cable ) to make it usable.
The white balance plug, to multie balance adaptor wouldnt fit in the hole , I bent it trying to get it in,so pulled the unit apart to fix it. I ended up shaving some plastic off the plug, The heat sink inside has been cut with a massive band saw and never cleaned up, what a mess.
Apart from that the charger works well .I have a little 50 watt turnigy and it wasnt able to charge a 6s above 86pcnt with 2.5 amps, the 380 w takes it to 98pcnt with 20 watts easily.
All up its an ok unit and I would advise others to buy it.

Ooben | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 10, 2012

Got this charger because I have everything from ni-cads to LiIo computer pulls to charge. It seems to be a great charger...but it is kind of hard to tell without any instructions. I have used it with niXX batteries and it does a very good job at detecting delta-peaks, but until I can decipher the lithium settings I'm not going to be using it on my litho batteries. Does HobbyKing have any instructions for this charger?

jeff125 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 08, 2012

Rock solid thus far.

Only reached 51C while charging a 6S pack at 12amps. Fans are loud but do a good job cooling the unit.

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 25, 2012

Great battery charger for the value. Cooling fans are a little noisy when loading batteries with high amperage. The display is bright and easy to read.

The buttons and procedures for the programming are the same of the other charger. Well made and sturdy housing.

Amply satisfied.

SCTarguard387 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 01, 2011

Had mine for about 2 1/2 months working fine until today. Powered it up and would not go past the start up screen, nothing. None of the buttons worked. Powered off several times nope then I lightly tapped it on my work bench and bam there it goes working again.

  1. 1
  2. 2
Klantbestanden
manual Download [1644]
MANUAL Download [1]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!