Turnigy Micro-6 LiPoly Battery Charger

• Overall
• Quality
• Value

Nice 1s battery charger

Feb 22, 2018

For small 1S battery is very convenient and reduce the charging time, because of the charging current limit, if the capacity over 500ma or more, charging time is a bit slow, using a general RC charger would be more appropriate.
When charging, the voltage meter value is not correct, dont worry , just waiting for the green light when the charging is completed, or you can get the correct value by pressing stop charging.
Convenient，Easy to use , Good price~ Recommend

• Overall
• Quality
• Value

Help

Oct 22, 2017

whats this about it all being revere plority for tuirnigy batteries that ive read in this comment section ,is this charger safe to use or not as i dont want to plug into my expensive power supply and fry the lot ,can anyone give any correct info ,im wanting to charge batteries for the blade inductrix fpv

• Overall
• Quality
• Value

Works great, polarity is correct for WL toys 931 1s lipo

May 05, 2017

This charger works great on my WL toys 931 1s lipo, the polarity is correct.
The turnigy Nanotec lipo's have their polarity reversed,
TURNIGY NANO-TECH 750MAH LIPO PACK 1S 35 ~ 70C (PAST NINE EAGLES SOLO PRO-180)
Sku: 9210000003

So check first or solder and change the polarity of the turnigy lipo's before connecting.
Check the polarity with a volt meter on the charger and your lipo first.
Also before connecting to your RC craft, check what polarity. it requires.

• Overall
• Quality
• Value

With a bit of help, suits my purpose well.

Dec 15, 2016

Nice little charger, does just what it says it will. I've been using it with "1S Female to Losi Male" adapter cables from rc-connectors.com to charge 4 Inductrix batteries at a time. Their adapters are a little pricey, but worth it in my opinion (nicely made). The plugs need to be assembled with the correct polarity, which should not be done by someone who is uncomfortable checking their work with a volt meter!
Only 4 of the 6 charger outputs are low enough current for charging Inductrix batteries, though I believe it is possible to hack the remaining two circuits to lower their current. I thought I saw someone talking about that here, but I can no longer find their thread.

• Overall
• Quality
• Value

Customer Rated

Oct 19, 2016

Nice 1s battery charger for indoor racing drone, there are four 350ma charge ports and two 500ma ports, charging speed is slow, however, 6x battery charging at same time is satisfied.

ATTENTION: the connector are walkera connectors.

• Overall
• Quality
• Value

Customer Rated

Apr 01, 2016

This is a great little charger. 6 total ports using 4 350ma ports and 2 500ma ports. You can plug it into a computer or power cell and charge batteries or use a power supply @6v. Cant go wrong with this for especially smaller batteries. I use it for my 1s 3.7v 750mah batteries for my Syma X5SW. Works great.

• Overall
• Quality
• Value

Customer Rated

Mar 23, 2016

I am liking this little charger for the micro heli batteries. USB powered, so could use in the field from a battery bank etc, and has a voltage display and two fixed charge rates depending on the port you plug into. charges each battery individually or all together. perfect. and so cheap.! Easy to use.
charges 4 batts at 350mA and 2 at 500mA (verified with an external meter). very neat solution. must have.

• Overall
• Quality
• Value

Customer Rated

Nov 03, 2015

A Turnigy loader? There are no Turnigy Lipos on the market which are connectable. You changed all 6 ports PLUS with MINUS. That is a full short people!!!! PLEASE DO STOP SELLING! PEOPLE BURNT THERE FINGERS AND LIPOS WILL EXPLODE!! ALSO POWERSupply explode or burn!!!

STOP SELLING