Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy MultiStar BLheli_32 ARM 51A Race Spec ESC 2~6S (OPTO)

Generating Links

Turnigy MultiStar BLheli_32 ARM 51A Race Spec ESC 2~6S (OPTO)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 21,19
Toestand:
Uit voorraad!
SKU:
9351000104-0
Geen verzendkosten? Klik hier meer leren!

Turnigy MultiStar BLheli_32 ARM ESCs are super simple to install and are very easy to setup. They have already taken places on the podium a number of times with our beta testing Ninjas. If you're looking for an edge against the competition and take your FPV drone racing seriously the Turnigy MultiStar 32bit ESCs are worth taking a closer look at.


Turnigy MultiStar BLheli_32 ARM ESCs feature a proprietary firmware (Rumored to have been developed in DrEvils Lab) and deliver a smooth linear throttle response without sacrificing a rapid, crisp response to any throttle inputs.


Turnigy MultiStar ESC's come pre-tinned, solder ready, all you need to do is adjust the wire lengths, solder on the type of battery connection of your choice and then solder on the motor wires. With their small lightweight design these ESC's will have you racing fast and at a very affordable price.


Features:
• Smooth and linear throttle control
• Fast response to throttle inputs
• Arm Cortex-M0 MCU
• Stalled motor protection
• Throttle signal loss protection
• Safe power-on (throttle lockout)


Specs:
Constant Current: 51A
No of Cells: 2-6S Lipoly
Voltage: 8.4~25.2V
BEC: Opto
Timing: Auto
Frequency: 48Mhz
Governor: None
MCU: Arm Cortex-M0
Dimensions: 36 x 21 x 5mm
Weight: 17.2g inc wires

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Valev | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good

Jan 21, 2021

Very good ESC!

steven | Geverifieerde koper

  • Overall
  • Quality
  • Value

Stopped working after 2 weeks

Nov 11, 2019

stopped working after 2 weeks of moderate use

GJ | Geverifieerde koper

  • Overall
  • Quality
  • Value

Great controller

Sep 07, 2019

The ESC works great.
Programming with a passthrough with an Arduino Nano and BLHeli_32.
Doesnt even get warm at 55A.

Klaus | Geverifieerde koper

  • Overall
  • Quality
  • Value

one smoked up by the first use

Aug 09, 2019

I bought 2 of them. On first connecting on a 4S battery one of them broke immediately ( both was connected in parallel mode, so the polarity of the battery was right ) , it came a little bit smoke out the housing and since probably missing a phase, a connected motor jerky only, this is no good quality

Norbert | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good ESC also or glider

Jun 23, 2019

I used it as a Glider ESC with 2S Lipo at 35A. No need for a BEC, because I use HV Servos. Stays cool and good brake with a 16x8 prop

Klaus | Geverifieerde koper

  • Overall
  • Quality
  • Value

Geniale Regler mit Telemetrie

Jun 12, 2019

Perfekter Regler für Copter, Modellboote und Flugzeuge. Läßt sich einwandfrei löten, man sollte es nur ein wenig können..... Eine Anleitung wird nicht benötigt, es ist ein blheli_32 Regler und die bedienen sich alle gleich.... Mit der blheli_32 Suite läßt sich der Regler einwandfrei programmieren, hat sogar Vorwärts und Rückwärts Funktion (wenn man will). Zusätzlich vorhanden ist Telemetrie, mit dem Blheli Telemetry Feeder ist diese sogar mit Frsky und Flysky zu nutzen.

Geoff Kemp | Geverifieerde koper

  • Overall
  • Quality
  • Value

Difficult to Solder

May 24, 2019

I could not get a reliable joint on the motor tabs because the tabs can suck a massive amount of heat out of the solder before it flows. no matter how hot I got the tab and iron I always ended up with a dry frosty joint. My 60 watt iron I've used on thousands of things RC big and small. thick and thin for many years without difficulty just could not do the job. The last attempt I melted one of the FETS of the board and still the solder would not flow enough. Dang!

William | Geverifieerde koper

  • Overall
  • Quality
  • Value

Great ESCs

Jan 07, 2019

I have never had any problems with these. All the settings are made with BLHELI 32 software available free on line. These are the most reasonably priced ESCs I have found that are rated at 51 amps 6s.

Zdenek | Geverifieerde koper

  • Overall
  • Quality
  • Value

No user manual

Apr 24, 2018

It is not possible change any setting, there is no user manual.

Klantbestanden
turnigy-multistar-esc-manual.pdf Download [2]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!