Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global

Turnigy Multistar 4220-880Kv 16Pole Multi-Rotor Outrunner

Turnigy Multistar 4220-880Kv 16Pole Multi-Rotor Outrunner

QTY:

Now save bewaar € 0,99 € 0,99

Special Price € 18,60 € 18,60

You save bewaar € 0,99 € 0,99

Was  € 19,59

Stock:
Gewicht:
206 g
SKU:
9392000015

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Product
Omschrijving

Op zoek naar de ultieme macht systeem voor uw volgende Multi-rotor project? Zoek niet verder!

De Turnigy Multistar outrunners zijn ontworpen met een ding in het achterhoofd - het maximaliseren van Multi-rotor prestatie! Ze zijn voorzien van high-end 45SH magneten, hoge kwaliteit NMB lagers, 12 Polen, aangepaste motor monteren en al zijn precisie gebalanceerd voor goede werking, zijn deze motoren specifiek ontworpen voor multi-rotor gebruik.

De 4220-880 bevat een prop adapter en heeft een ingebouwde aluminium mount voor snelle en eenvoudige installatie op uw multi-rotor frame. Deze motoren worden geleverd in een mooie piepschuimen Multistar metalen doos.

Deze Multistar outrunners zijn speciaal ontworpen vanaf de grond opgebouwd voor multi-rotor gebruik en zijn niet gebaseerd op het vliegtuig motoren.


spec:
KV (RPM / V): 880
Cellen Lipo: 3s
Max Surge Watts (W): 250
Werken stroom: 17 ampère
Max.current (10s): 22 ampère
Nullaststroom: 0,8 ampère
Interne Resistance: 0.066 ohm
Aantal polen: 16
Afmetingen (Dia.xL): 42 x 25 mm
As: 3 mm
Prop: 10 x 4,7-11 x 4.7
Gewicht: 65g

Product
Specifications

Aanvullende Informatie

  • Sku:
    9392000015
  • Brand:
    MultiStar
  • Gewicht ( g)
    206.00
  • Lengte
    110.00
  • Breedte:
    60.00
  • Hoogte:
    75.00
  • Kv ( tpm / v )
    880.00
  • Max Currents (A )
    22.00
  • Vermogen ( W):
    250.00
  • Lengte B ( mm ):
    21.00
  • Kan Lengte D ( mm )
    21.00
  • Max Voltage ( V )
    11.00
  • Shaft A ( mm ):
    3.00
  • Unit Weight (g):
    65
  • C Diameter ( mm )
    42.00
  • Totale lengte E ( mm )
    25.00
  • Resistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Sehr laufruhige Motoren, gute Qualität und Verarbeitung.
Der Stromverbrauch ist mit 11" Propellern in Ordnung
Sie sind ihr Geld wert!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Das sind ganz tolle Motoren , das Preis Leistung verhältins topp .
Lauf ruhig . Habe 6 Stück , nun ist einer Defekt und sind keine Wellen erhältlich Schade .

MFG
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These are good-looking motors that run smooth and quiet, delivering very good performance. Tests were done with a Turnigy in-line power meter to measure electrical performance and a digital scale to measure thrust. Battery was a 3s 4500mah 30-50C Nano-Tech. The ESC was a stock Turnigy Plush 30A set for Medium timing. I detected no timing issues. The first test was with a GemfFan 11 x 4.7 SF plastic prop. Measured data was 20.5 amps, 230 watts and 1050 grams thrust. Although that exceeded the rated continuous current of 17 amps the motor did not get more than slightly warm. At 50pcnt it pulled 6.5 amps and 79 watts at 6.2 grams/watt. A second test was done using a GemFan 12 x 4.5 prop. That one pulled 28.0 amps (165pcnt continuous spec) at full throttle with 1100 grams thrust. I aborted the test after about 15 seconds because I smelled the winding varnish cooking and the case was getting hot. It seemed odd that the 12 prop produced just 50 grams of thrust ) more than the 11 at WOT but I ran the tests 3 times to verify the numbers. My guess is that the 12 combination less efficient. At hover (50pcnt) thrust the 11 produced 7 grams/watt while the 12 produced 6 grams/watt. To me the slight gain in thrust is not worth the risk of over-proping.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I put these on my quad, 1.1kg totalt weight. 2200mah 3s 40c zippy. 20A slim afro. I'm very glad with the quality, but after a little flying and some light crashes they make a noise, because of the crashes i can't say it's the bad bearings fault but will change them anyway. got really good "punch" in my quad with a 1:5.5 weight lift ratio. tried these in a rig with 3 different props, and measured power consumption and lift. data:
12x4.5 SF plastic: max 1,3kg thrust and about 230W. at 250g trust it get about 9g/W. 14 min medium wild flight time when consuming 2300mah.
12x5.5 CF T-style prop: max 1,4kg thrust and about 260W. at 250g trust it get about 10g/W. 15 min medium wild flight time
14x4.5 wood: max 1,4kg thrust. at 250g trust it get about 10g/W.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice good motors.
Just had today a flight with those motors :
-type hexa
-1x5000mAh 3S batteries
-4220-880Kv x 6
-ESC Afro 30A
-weight RTF : ~2.4Kg
-hover time : 8min

no glitch/sync issues on the motors during the hover.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
specs download now [284kb]

Combine

essential items and
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.