New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy Multistar 45 Amp Multi-rotor borstelloze ESC 2-6S (OPTO)

Turnigy Multistar 45 Amp Multi-rotor borstelloze ESC 2-6S (OPTO)

Discontinued Product

Please continue searching for a similar product.
Gewicht:
76 g
SKU:
9351000009
WANT FREE SHIPPING? Click here to find out more!

MultiStar SER's zijn, zijn van een kwaliteit snelheid controller bij een fantastische prijs! Ontworpen voor eenvoudige installatie en eenvoudige installatie van deze SER's hebben bewezen om uitstekende prestaties te leveren bij gebruik in Multi-rotor toepassingen. Als je begint in Multi-rotors en moeten een eenvoudig te gebruiken oplossing die is getest en bewezen te werken met Multi-rotor ambachtelijke dan deze snelheid controllers hebt u gedekt installeren.

Deze ESC beschikt over een zeer soepele maar lineaire gasrespons, zonder in te boeten een snelle, scherpe, reactie op een gashendel invoer. Veiligheid is niet vergeten met het kenmerken van verstelbare accu alle Multistar ESC LVC (set accu type LIXX naar LVC te schakelen), beveiliging vastgelopen motor (overbelasting), signaalverlies shut-down en veilige bewapenen.

Alle Multistar serie ESC is gekomen met bullet connectors geïnstalleerd die geschikt zijn voor het ESC vermogen handling. Dit zorgt voor plug-and-play gemak door simpelweg het toevoegen van de juiste batterijvoeding splitter (3,4 of 6 ESC) en de motor leiden extensies uit de Multistar modulaire accessoire lijn. Wat kan er eenvoudiger?

Alle Multistar ESC-functie een Atmega MCU dat de deur opent naar aanpasbare firmware - voor degenen die daartoe neigen! of als alternatief een programmeer-kaart kan worden gebruikt met de geïnstalleerde software voor een snelle en eenvoudige installatie van de pre-geflitste software.

Raadpleeg de gerelateerde items hieronder voor een soldeer gratis multi-rotor stroom oplossing voor uw volgende multi-rotor project aan te passen.

Details:
• Glad en lineaire gashendel
• Snelle reactie op de gashendel invoer
• Atel MCU
• vastgelopen motorbeveiliging
• Throttle signaal verloren bescherming
• Veilig power-on (gashendelvergrendeling)
• Ondersteuning 480Hz + hoge refresh rates (tot 499hz)
• Compatibel met de programmering kaart

specs:
Constant Current: 45A
Input Voltage: 2-6 cellen LiPoly
BEC: Geen (OPTO)
PWM: 8 KHz
Max RPM: 240,000rpm voor 2 Polen borstelloze motor
PCB Maat: 50mm x 30mm
Discharge Stekkers: Male 4.0mm Bullet Connector
Motor Stekkers: Female 4.0mm Bullet Connector
Gewicht: 63g

  • Sku 9351000009
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 76.00
  • Lengte 110.00
  • Breedte 25.00
  • Hoogte 45.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

wish these came with 3.5mm bullets instead of the 4mm so they can match all the motors I use that need these to run 6s.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

wish these came with 3.5mm bullets instead of the 4mm so they can match all the motors I use that need these to run 6s.

i bought one it was bad had to jump threw hoops to get a replacement. when i got it, it was also bad. so i took store credit. i guess they dont test them before they are shipped. i went with the hobbyking 40amp instead and it works great

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i bought one it was bad had to jump threw hoops to get a replacement. when i got it, it was also bad. so i took store credit. i guess they dont test them before they are shipped. i went with the hobbyking 40amp instead and it works great

got one it was bad. got a replacement it was bad also. i do not recomend this part

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

got one it was bad. got a replacement it was bad also. i do not recomend this part

If you use a Naza or Wookong FC, and need a lot of lifting power....the 45A Multistar works very well....even with HK 490kv pancakes. Not sure why so many people give this product a bad rap, but I have to assume that everyone wants to be an "expert" and few really are (including myself). I have cycled these units in rapid acceleration bench tests (under load) with a 4S/5000mah battery...for extended periods, without a single failure (motor or esc). This is the perfect match for systems that need to replace DJI 30A OPTO's due to lower kv motor changes or higher lifting requirments. OPTO's are the answer, if your FC has power supplied by its own power unit, as all DJI products do.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

If you use a Naza or Wookong FC, and need a lot of lifting power....the 45A Multistar works very well....even with HK 490kv pancakes. Not sure why so many people give this product a bad rap, but I have to assume that everyone wants to be an "expert" and few really are (including myself). I have cycled these units in rapid acceleration bench tests (under load) with a 4S/5000mah battery...for extended periods, without a single failure (motor or esc). This is the perfect match for systems that need to replace DJI 30A OPTO's due to lower kv motor changes or higher lifting requirments. OPTO's are the answer, if your FC has power supplied by its own power unit, as all DJI products do.

I'm running six of them at a Tarot T810 which is equipped with Turnigy Multistar 4822-490Kv 22Pole Multi-Rotor Outrunners. FC is DJI Wookong M. Performance of this huge Hexacopter is excellent, ESC/Motor Combo was a really great choice.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm running six of them at a Tarot T810 which is equipped with Turnigy Multistar 4822-490Kv 22Pole Multi-Rotor Outrunners. FC is DJI Wookong M. Performance of this huge Hexacopter is excellent, ESC/Motor Combo was a really great choice.

Great speed controllers,I use them on my quad and they have seen there fair share of not so friendly landings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great speed controllers,I use them on my quad and they have seen there fair share of not so friendly landings.

Customer files
825483295X94986X55.pdf Download [2384]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!