Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy Multistar 4822-490Kv 22Pole Multi-Rotor Outrunner

Generating Links

Turnigy Multistar 4822-490Kv 22Pole Multi-Rotor Outrunner

Prijs:

Now save bespaar € 0,00 € 0,00

€ 34,01
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
9392000002
Geen verzendkosten? Klik hier meer leren!

Op zoek naar de ultieme macht systeem voor uw volgende Multi-rotor project? Zoek niet verder!

De Turnigy Multistar outrunners zijn ontworpen met een ding in het achterhoofd - het maximaliseren van Multi-rotor prestatie! Ze zijn voorzien van high-end 45SH magneten, hoge kwaliteit NMB lagers, 22 Polen, aangepaste motor monteren en al zijn precisie gebalanceerd voor goede werking, zijn deze motoren specifiek ontworpen voor multi-rotor gebruik.

De 4822-490 bevat een prop adapter en heeft een ingebouwde aluminium mount voor snelle en eenvoudige installatie op uw multi-rotor frame. Deze motoren worden geleverd in een mooie piepschuimen Multistar metalen doos.

Deze Multistar outrunners zijn speciaal ontworpen vanaf de grond opgebouwd voor multi-rotor gebruik en zijn niet gebaseerd op het vliegtuig motoren.


spec:
KV (RPM / V): 490
Cellen Lipo: 4-6s
Max Surge Watts (W): 300
Werken stroom: 12 ampère
Max.current (10s): 17 ampère
Nullaststroom: 0.45 amp
Interne Resistance: 0.104 ohm
Aantal polen: 22
Afmetingen (Dia.xL): 48 x 25 mm
Shaft: 6 mm
Prop: 12 x 3-14 x 5
Gewicht: 98 g

* Kleur kan variëren

  • Kv ( tpm / v ) 490.00
  • Max Currents (A ) 17.00
  • Resistance ( mh ) 104.00
  • Max Voltage ( V ) 22.00
  • Vermogen ( W) 300.00
  • Shaft A ( mm ) 3.00
  • Lengte B ( mm ) 25.00
  • Can Diameter C ( mm ) 48.00
  • Kan Lengte D ( mm ) 10.00
  • Totale lengte E ( mm ) 34.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • MultiStar Motors
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

AlexSch | Geverifieerde koper

  • Overall
  • Quality
  • Value

Alex

May 14, 2019

These are very good engines. They stand on my tarot 680pro. But the only negative is very weak bearings !!! After a short time, a backlash appears in the motor. I changed to high-quality Japanese bearings and now it's better

D'hondt | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 28, 2015

Bought 4 pieces for a custom build quad.
Due to that fact i have to test them prior to installation as i want to know exactly what i am dealing with and what props gives the satisfying result.
When a ball bearing goes bad its announced with a distinguished cracking/popping sound.
So as i was testing different setups i heard and recognized immediately that sound.
It couldn't be true ? After 30 min ? I know it worsens and it could lead to a stalling motor.
So i tested further with that issue in mind and sure enough it got worse.
Lucky me, again.
As i am vigilant i tested all 4, and yes in various degrees they have the same issue.
Contacted support, i have to send them back ? Right. Return expense on my account and it will cost me more then new ball bearings. Also i like the performance of the motors. And what do i get in return if the refund and i buy other ones ? again some with faulty ball bearings ? No thanks. Its a bifurcation, but its crap they don't put in ball bearing of some decent quality because i toke one apart and the bearings used are 1140zz from NMB grade P0, thats really low quality and cheapest of the cheapest.( * Note: 1140zz is a new description, they can be found under there old reference in abundance as 694zz ). If the design was with multi-rotors in mind thet this is a way of making sure things fall out of the sky.

thomas | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Feb 02, 2015

Bought 4 of these a while back for a quadcopter, then converted to a hex needing to buy 2 more. The first 4 I bought were black with a little different mounting pedestal. Now they are green as pictured. I just mounted the 2 green upfront. Anyway, they are very powerful and quiet running even at WOT. Would recommend for any heavy lift multirotor. Swinging 13x5.5 Carbon props 40amp SimonK esc's No motor heat at all.

desiclad maafia | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 20, 2014

I bought 6 of these in June 2013 to make a hexacopter..... It took me almost a year to complete my custom build frame, but in the end the result was very fruitful.
These small engines are just monsters. 6 of theses can lift anything around 5 Kg with ease on 4S and 15x5.5 paddle type props and motors barely get warm.
I obtain flight time of around 9 minutes with 8000mAH and 4kg AUW. I am very pleased with them :).

trancesurf | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 02, 2014

I purchased 5 of these motors for a X650 tarot quad. So far I had around 30 flights with no issues whatsoever.
I use 30A hobby king speed controller, 5000ma 4s battery and 15x5 inch C/F propeller.
A nice and stable working combination for low and medium wind conditions. It flies a little twitchy in higher and gusty winds but stays air-born. This is a smooth running motor with enough power for most applications at a good price. The only ting I dont like are the bullet connectors and their solder joints.

The Ghost | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 11, 2014

Very well built motors, Used 4 in a quad and had 40min flights and the motor does not even get hot, running 4cell and 13x5.5 carbon props, will be buying more for an hexa.

MrMous | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 16, 2014

Tarot 680pro, 12x6 carbon fiber props on multistar 4822-490kv w/ 30amp multistar escs and 2 multistar 6600mah 4s in parallel, naza v2, teleporter v3 w/ gopro h3 on tarot t-2d.

WheresWald0 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 28, 2014

Using this on a stretched TL65B01 Tarot Quad. It is 720mm diameter on the motors. With BLHeli they ramp up very smoothly with almost zero vibration. I did pull the stickers of the shell.

Peter | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 05, 2014

Preis - Leistung: in Ordnung
ich verwende vier dieser Motoren in Verbindung mit Simonk Reglern in meinem Quad. Leider sind sie nicht ganz so effizient wie erhofft.
Verwendet werden 3S 8000mAh und 4S 6000mAh an 15x5,5 Carbon Props.
Der Quadrocopter wiegt mit allem Euquip und Akkus 2550g.
Flugzeiten etwa 13-15min. Motoren sind nach dem Flug nicht einmal warm.

Kritik: Motorkabel extrem brchig und die Stecker sehr schlecht verltet. Auf jeden Fall Tauschen.
Wer mehr ausgeben kann/will: Die Tiger Motoren sind qualitativ besser und effizienter
Fr mich hat sich der Umstieg von Turnigy D3536 750kv kaum gelohnt. Nur etwa 2min mehr Flugzeit.

WheresWald0 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 03, 2014

Ordered four one has a rattle will need to disassemble it to find it. Otherwise very smooth power. These motors are not silent with a rather high pitch coming from them, Powering with a 4S battery and they are barely warm after a flight. The size and weight are good for the power output. I have been running these using BLHeli at the default settings and it seems to work well, neither ESC nor Multistar are hot when done.

  1. 1
  2. 2
Klantbestanden
749282040X547349X44.pdf Download [41]
Blaz Quad Download [662]
4s2p_APC-14x5.5 Download [177]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!