Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

Turnigy Multistar 4822-490Kv 22Pole Multi-Rotor Outrunner

Turnigy Multistar 4822-490Kv 22Pole Multi-Rotor Outrunner

QTY:

Now save bewaar € 0,00 € 0,00

€ 28,86
Stock:
Gewicht:
281 g
SKU:
9392000002

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Product
Omschrijving

Op zoek naar de ultieme macht systeem voor uw volgende Multi-rotor project? Zoek niet verder!

De Turnigy Multistar outrunners zijn ontworpen met een ding in het achterhoofd - het maximaliseren van Multi-rotor prestatie! Ze zijn voorzien van high-end 45SH magneten, hoge kwaliteit NMB lagers, 22 Polen, aangepaste motor monteren en al zijn precisie gebalanceerd voor goede werking, zijn deze motoren specifiek ontworpen voor multi-rotor gebruik.

De 4822-490 bevat een prop adapter en heeft een ingebouwde aluminium mount voor snelle en eenvoudige installatie op uw multi-rotor frame. Deze motoren worden geleverd in een mooie piepschuimen Multistar metalen doos.

Deze Multistar outrunners zijn speciaal ontworpen vanaf de grond opgebouwd voor multi-rotor gebruik en zijn niet gebaseerd op het vliegtuig motoren.


spec:
KV (RPM / V): 490
Cellen Lipo: 4-6s
Max Surge Watts (W): 300
Werken stroom: 12 ampère
Max.current (10s): 17 ampère
Nullaststroom: 0.45 amp
Interne Resistance: 0.104 ohm
Aantal polen: 22
Afmetingen (Dia.xL): 48 x 25 mm
Shaft: 6 mm
Prop: 12 x 3-14 x 5
Gewicht: 98 g

* Kleur kan variëren

Product
Specifications

Aanvullende Informatie

  • Sku:
    9392000002
  • Brand:
    MultiStar
  • Gewicht ( g)
    281.00
  • Lengte
    110.00
  • Breedte:
    60.00
  • Hoogte:
    75.00
  • Kv ( tpm / v )
    490.00
  • Max Currents (A )
    17.00
  • Vermogen ( W):
    300.00
  • Lengte B ( mm ):
    25.00
  • Kan Lengte D ( mm )
    10.00
  • Max Voltage ( V )
    22.00
  • Shaft A ( mm ):
    3.00
  • Unit Weight (g):
    98
  • C Diameter ( mm )
    48.00
  • Totale lengte E ( mm )
    34.00
  • Resistance ( mh ):
    104.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Bought 4 pieces for a custom build quad.
Due to that fact i have to test them prior to installation as i want to know exactly what i am dealing with and what props gives the satisfying result.
When a ball bearing goes bad its announced with a distinguished cracking/popping sound.
So as i was testing different setups i heard and recognized immediately that sound.
It couldn't be true ? After 30 min ? I know it worsens and it could lead to a stalling motor.
So i tested further with that issue in mind and sure enough it got worse.
Lucky me, again.
As i am vigilant i tested all 4, and yes in various degrees they have the same issue.
Contacted support, i have to send them back ? Right. Return expense on my account and it will cost me more then new ball bearings. Also i like the performance of the motors. And what do i get in return if the refund and i buy other ones ? again some with faulty ball bearings ? No thanks. Its a bifurcation, but its crap they don't put in ball bearing of some decent quality because i toke one apart and the bearings used are 1140zz from NMB grade P0, thats really low quality and cheapest of the cheapest.( * Note: 1140zz is a new description, they can be found under there old reference in abundance as 694zz ). If the design was with multi-rotors in mind thet this is a way of making sure things fall out of the sky.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought 4 of these a while back for a quadcopter, then converted to a hex needing to buy 2 more. The first 4 I bought were black with a little different mounting pedestal. Now they are green as pictured. I just mounted the 2 green upfront. Anyway, they are very powerful and quiet running even at WOT. Would recommend for any heavy lift multirotor. Swinging 13x5.5 Carbon props 40amp SimonK esc's No motor heat at all.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 6 of these in June 2013 to make a hexacopter..... It took me almost a year to complete my custom build frame, but in the end the result was very fruitful.
These small engines are just monsters. 6 of theses can lift anything around 5 Kg with ease on 4S and 15x5.5 paddle type props and motors barely get warm.
I obtain flight time of around 9 minutes with 8000mAH and 4kg AUW. I am very pleased with them :).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased 5 of these motors for a X650 tarot quad. So far I had around 30 flights with no issues whatsoever.
I use 30A hobby king speed controller, 5000ma 4s battery and 15x5 inch C/F propeller.
A nice and stable working combination for low and medium wind conditions. It flies a little twitchy in higher and gusty winds but stays air-born. This is a smooth running motor with enough power for most applications at a good price. The only ting I dont like are the bullet connectors and their solder joints.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very well built motors, Used 4 in a quad and had 40min flights and the motor does not even get hot, running 4cell and 13x5.5 carbon props, will be buying more for an hexa.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tarot 680pro, 12x6 carbon fiber props on multistar 4822-490kv w/ 30amp multistar escs and 2 multistar 6600mah 4s in parallel, naza v2, teleporter v3 w/ gopro h3 on tarot t-2d.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using this on a stretched TL65B01 Tarot Quad. It is 720mm diameter on the motors. With BLHeli they ramp up very smoothly with almost zero vibration. I did pull the stickers of the shell.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Preis - Leistung: in Ordnung
ich verwende vier dieser Motoren in Verbindung mit Simonk Reglern in meinem Quad. Leider sind sie nicht ganz so effizient wie erhofft.
Verwendet werden 3S 8000mAh und 4S 6000mAh an 15x5,5 Carbon Props.
Der Quadrocopter wiegt mit allem Euquip und Akkus 2550g.
Flugzeiten etwa 13-15min. Motoren sind nach dem Flug nicht einmal warm.

Kritik: Motorkabel extrem brchig und die Stecker sehr schlecht verltet. Auf jeden Fall Tauschen.
Wer mehr ausgeben kann/will: Die Tiger Motoren sind qualitativ besser und effizienter
Fr mich hat sich der Umstieg von Turnigy D3536 750kv kaum gelohnt. Nur etwa 2min mehr Flugzeit.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ordered four one has a rattle will need to disassemble it to find it. Otherwise very smooth power. These motors are not silent with a rather high pitch coming from them, Powering with a 4S battery and they are barely warm after a flight. The size and weight are good for the power output. I have been running these using BLHeli at the default settings and it seems to work well, neither ESC nor Multistar are hot when done.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Seems to work well but one of the screw holes was messed and my propeller got unbalanced causing my copter to crash
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • MultiStar Motors

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.