Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy Multistar BLheli_32 ARM 4-in-1 32bit 21A 11g Race Spec ESC 2~4S

Generating Links

Turnigy Multistar BLheli_32 ARM 4-in-1 32bit 21A 11g Race Spec ESC 2~4S

Prijs:

Now save bespaar € 0,00 € 0,00

€ 40,94
Verzonden vanaf:
  • USA
  • Global
Al gekocht
Geschatte aankomsttijd: Geen Geschatte Aankomsttijd [ ? ]
Toestand:
Uit voorraad!
SKU:
9351000100-0
Geen verzendkosten? Klik hier meer leren!

The Turnigy MultiStar BLheli_32 ARM 4-in1 ESC is very light, compact, super simple to install and has a very easy setup process. This 4-in-1 ESC is the perfect solution where you are looking for outstanding performance in a small and neat package. If you're trying to get an edge on the competition and take your FPV drone racing seriously then the Turnigy MultiStarBLheli_32 ARM 4-in-1 32bit ESC is worth taking a closer look at.


Turnigy MultiStar BLheli_32 ARM ESCs feature a proprietary firmware (rumored to have been developed in DrEvils Lab!!) that delivers a smooth linear throttle response, without sacrificing a rapid, crisp response to your throttle inputs. The ESC is supplied with a 6 pin SH 1.0 signal input lead for easy connection to most flight controllers. Alternatively there is also supplied a SH 1.0 to 2.54mm DuPont breakout cable which will connect to standard servo pin headers.


Each 4-in-1 ESC has plated connections to allow you to easily solder your motor wires directly to the PCB and then add your preferred connector to the pre-tinned power cables. With their small lightweight design these ESCs will have you racing fast and at a very affordable price.


Features:
• Lightweight (11g)
• 4 x 21A ESCs in one unit
• Very compact
• Smooth and linear throttle control
• Fast response to throttle input
• Arm Cortex-M0 MCU
• Stalled motor protection
• Throttle signal loss protection
• Safe power-on (throttle lockout)
• Supports 480Hz high refresh rates
• Programmable


Specs:
Constant Current: 4 x 21A
Cells: 2~4S
Input Voltage: 8.4v ~ 16.8v
BEC: Yes
MCU: Arm Cortex-M0
Timing: Auto
Frequency: 48Mhz
Programmable: Yes (with Multistar program card)
PCB Size: 36 x 36 x 5mm
Weight: 11g


Includes:
1 x 4-in-1 BL-32 ESC
1 x Mounting kit
1 x Cable connection set

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Marcus | Geverifieerde koper

  • Overall
  • Quality
  • Value

Works like a charm!

Jan 30, 2021

Connected it to a Matek F405-CTR and set it to Dshot 600. It worked right away. Have been using it for two years by now and never had a problem. It came with BLheli32 Rev. 32.3. I have since updated to 32.7 and can now run it with bidirectional Dshot enabled.

Jan Heinen | Geverifieerde koper

  • Overall
  • Quality
  • Value

Fijne regelaar.

May 27, 2020

Mooi kompakte regelaar. Helaas is de 32 bit multistar program card uitverkocht

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!