Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy Multistar BLheli_32 ARM 33A 3g Race Spec ESC 2~5S (OPTO)

Generating Links

Turnigy Multistar BLheli_32 ARM 33A 3g Race Spec ESC 2~5S (OPTO)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 11,98
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
9351000099-0
Geen verzendkosten? Klik hier meer leren!

The Turnigy MultiStar BLheli_32 ARM ESCs are very light, compact, super simple to install and have a very easy setup process. If you're looking for an edge against the competition and take your FPV drone racing seriously then the Turnigy MultiStar BLheli_32 ARM ESCs are worth taking a closer look at.


Turnigy MultiStar BLheli_32 ARM ESCs feature a proprietary firmware (rumored to have been developed in DrEvils Lab!!) that delivers a smooth linear throttle response, without sacrificing a rapid, crisp response to your throttle inputs.


Each ESC has plated connections to allow you to easily solder your motor wires directly to the PCB and then add your preferred connector to the pre-tinned power cables. With their small lightweight design these ESC's will have you racing fast and at a very affordable price. 


Features:
• Lightweight (3g)
• Smooth and linear throttle control
• Fast response to throttle input
• Arm Cortex-M0 MCU
• Stalled motor protection
• Throttle signal loss protection
• Safe power-on (throttle lockout)
• Supports 480Hz high refresh rates
• Programmable


Specs:
Constant Current: 33A
Cells: 2~5S
Input Voltage: 8.4v ~ 21v
BEC: None (opto only)
MCU: Arm Cortex-M0
Timing: Auto
Frequency: 48Mhz
Programmable: Yes (with Multistar program card)
PCB Size: 29 x 16 x 5mm
Weight: 3g

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Pablo | Geverifieerde koper

  • Overall
  • Quality
  • Value

Very Bad

Mar 03, 2021

Very Bad I buy 7 and 2 don't works, one short cut and another don't drive motor

Dutchfpv | Geverifieerde koper

  • Overall
  • Quality
  • Value

Perfect in a s1100

Feb 10, 2021

They work great and easy to setup with blheli in pas through mode with a matek board. So you dont need the multistar program card! Add some heatsinks because i use 2 of them in a Harrier s1100 flying wing.

Valev | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good

Jan 21, 2021

Very good ESC, I use on fixed wing

Laurent | Geverifieerde koper

  • Overall
  • Quality
  • Value

Very good ESC

Nov 10, 2020

I use it as a replacement part for my blade 230s (tail motor only) as it is way cheaper than the stock ESC. I just had to adapt the PID parameters of the receiver. In the end, it goes better than the stock part (very good tail behavior). It is very light and small so that I could place it in the original location.

Laurent | Geverifieerde koper

  • Overall
  • Quality
  • Value

Very good ESC

Nov 10, 2020

I use it as a replacement part for my blade 230s (tail motor only) as it is way cheaper than the stock ESC. I just had to adapt the PID parameters of the receiver. In the end, it goes better than the stock part (very good tail behavior). It is very light and small so that I could place it in the original location.

Laurent | Geverifieerde koper

  • Overall
  • Quality
  • Value

Very good ESC

Nov 10, 2020

I use it as a replacement part for my blade 230s (tail motor only) as it is way cheaper than the stock ESC. I just had to adapt the PID parameters of the receiver. In the end, it goes better than the stock part (very good tail behavior). It is very light and small so that I could place it in the original location.

Laurent | Geverifieerde koper

  • Overall
  • Quality
  • Value

Very good ESC

Nov 10, 2020

I use this ESC as a replacement part in my Blade 230S for the tail motor (it is way cheaper than the stock part). It works very well and it is very light. I just had to modify the PID parameters of the receiver. It is quite small so that it can be placed in the original location. My heli flies as well as with the stock part.

Abu Bakar | Geverifieerde koper

  • Overall
  • Quality
  • Value

Awsome mini esc

Sep 15, 2018

Have this attach with racestar 2506 2700kv, on my own build wing. Use 3s 1550mah/4s 1000mah. Auw just below 500mg. Flight time on both batteries almost 10min mostly 50 to 60 percent throttle.

Klantbestanden
turnigy-multistar-esc-manual.pdf Download [2]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!