New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy nano-tech 1200mAh 3S 15 ~ 25C Lipo AIRSOFT Pack

Turnigy nano-tech 1200mAh 3S 15 ~ 25C Lipo AIRSOFT Pack

Shipped From:
  • USA
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 8,35
status:
In voorraad
SKU:
NG1200A.3S.15
WANT FREE SHIPPING? Click here to find out more!

Als het gaat om het zetten rondes neer bereik, niemand wil compromis over de vuurkracht! dat is de reden waarom de legendarische Turnigy nano-tech accu's zijn nu beschikbaar voor Airsoft combat. Hogere motortoerental, minder spanning sag en uitgebreid bedrijfstijden gelijk betere prestaties van je wapen van keuze.

De nano-tech Airsoft serie beschikken ook over 5C lading ratings brengen je terug in de frontlinie sneller!

Krijg een oneerlijk voordeel en zorg ervoor dat je tegenstanders weten dat ze werden uitgevoerd door nano-tech hebben genomen!

Spec.
Capaciteit: 1200mAh
Voltage: 3s1p / 3S Cell / 11.1V
Ontlading: 15C Constant / 25C Burst
Gewicht: 94g (met inbegrip van draad, plug & geval)
Afmetingen: 128x17x20mm (per stuk)
Balance Plug: JST-XH
Kwijting Plug: Mini-Tamiya (Mini Molex)

De nano-kerntechnologie lithium ion batterijen is de toepassing van nanometer geleidende additieven.

1) De nanometer geleidende additieven vormen ultrasterke elektronen geleidend netwerk in de electroden waarop elektronische geleidbaarheid te verhogen.
2) Deze toevoegingen zorgen voor een supersterke mogelijkheid voor de imbibitie in de dragervloeistof om meer ionkanalen te leveren. Dit verbetert het vermogen van ionen transmissie en ionendiffusie.
Door het verbeteren van de elektronische geleidbaarheid en ion transmissie, wordt de impedantie verminderd en de polarisatie van een hoog percentage ontlading daalt sterk.

Voordelen ten opzichte van traditionele batterijen Lipo:
-Power Dichtheid bereikt 7,5 kw / kg.
-Minder Voltage sag in hoog tempo ontlading, waardoor meer vermogen onder belasting.
Intern impedantie zo laag als 1.2mΩ bereiken vergeleken met die van een standaard 3mΩ LiPoly.
-Meer Thermische controle, pak doesnt meestal overschrijden 60degC
-Dikte Zwelling tijdens zware belasting is momenteel niet meer dan 5%, vergeleken met 15% van een normale LiPoly tijdens zware belasting.
-Hogere Capaciteit tijdens zware ontlading. Meer dan 90% bij 100% C rate.
-Fast In staat rekening te brengen, tot 15C op sommige batterijen.
-Langere Cyclus leven, bijna het dubbele van die van standaard LiPoly technologie

* De lengte van saldo opladen draad kan variëren

  • Sku NG1200A.3S.15
  • Brand nano-tech
  • Gewicht 145.0000
  • Lengte 127.00
  • Breedte 18.00
  • Hoogte 21.00
  • Capaciteit ( mAh ) 1200.00
  • Discharge ( c ) 15.00
  • Max Charge Rate ( C ) 5.00
  • Lengte - A ( mm ) 128.00
  • Hoogte - B ( mm ) 17.00
  • Width-C(mm) 20.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

thank you vary vary fast delivery wow

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

thank you vary vary fast delivery wow

Fit well in M4 stock crane style eag.
You can put one in each outside tube
This will allow a spare battery.
Fit well too into AK74U
A must to have for airsoft players.
The only problem is you have to be very very patient.
I bought 2 batteries on May 31st and I finally received it August 12nd

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fit well in M4 stock crane style eag.
You can put one in each outside tube
This will allow a spare battery.
Fit well too into AK74U
A must to have for airsoft players.
The only problem is you have to be very very patient.
I bought 2 batteries on May 31st and I finally received it August 12nd

good battery but this will fit to APS stock tube(lenght 140mm) but for orther stock like Dboys u must use 1000mAh because this lenght 110mm and you can't use mosfet

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good battery but this will fit to APS stock tube(lenght 140mm) but for orther stock like Dboys u must use 1000mAh because this lenght 110mm and you can't use mosfet

good LiPo bat for airsoft

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good LiPo bat for airsoft

Tamao justito para su uso en culatas tipo crane (roza sin llegar a daar el plastico, si se hincha no entra), tambien ideal para guardamanos de SVD y cuerpos de AK (tipo lapiz se sobreentiende)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tamao justito para su uso en culatas tipo crane (roza sin llegar a daar el plastico, si se hincha no entra), tambien ideal para guardamanos de SVD y cuerpos de AK (tipo lapiz se sobreentiende)

. cyma - 1200 \ ( 130 \).
* .
.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

. cyma - 1200 \ ( 130 \).
* .
.

nice lipo for my airsoftgun

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice lipo for my airsoftgun

GREAT BATTERIESS!!!!!


They came very well balanced (2nd cell was only 0.02v off)

These fit almost all cranestocks, G36 handguards (KWA), buffer tubes and of course, full stocks. They dont fit in M4 handguards (KWA tested) or AK top covers. (Dboys) I have not tried it in Mp5s that have the battery on top, but i imagine they wouldnt fit.

Great batteries!
5/5

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

GREAT BATTERIESS!!!!!


They came very well balanced (2nd cell was only 0.02v off)

These fit almost all cranestocks, G36 handguards (KWA), buffer tubes and of course, full stocks. They dont fit in M4 handguards (KWA tested) or AK top covers. (Dboys) I have not tried it in Mp5s that have the battery on top, but i imagine they wouldnt fit.

Great batteries!
5/5

Very nice product for Airsoft use. You can use it in crain on the back of replica. If it would be 1mm wider or higher it wouldnt fit into the tube.

I do not advice it for any gear. It gives a lot of torque and high rotation speed. You can load the spring up to 160m/s.

I would appreciate if would be possible to made 20mm shorter battery. The power and balance cable should be made of maximal length 25-30mm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice product for Airsoft use. You can use it in crain on the back of replica. If it would be 1mm wider or higher it wouldnt fit into the tube.

I do not advice it for any gear. It gives a lot of torque and high rotation speed. You can load the spring up to 160m/s.

I would appreciate if would be possible to made 20mm shorter battery. The power and balance cable should be made of maximal length 25-30mm.

* Summary
Very nice LiPo for airsoft guns at a great price! There is absolutely no reason to buy the more expensive Firefox or Flame brands. The main wires are pretty long (slightly over 140mm incl. connector), while the balance tap measures around 80mm. I usually get rid of the Tamiyas and convert them to high-current T-connectors instead.

* Application
One of these stick LiPos fits nicely in a buffer tube if you are using a Magpul MOE stock.

But you can *double* the capacity (ie. to 2400mAh) if you use two of these LiPos in an H&K 416-style crane stock in a parallel configurationwith a parallel adapter, of course, that you can solder on your own. More info here: http://1st-sword.com/forum/viewtopic.php?f=23&t=1810&p=15998#p15998

You can do the same parallel configuration with many other front-wired M4s that still use the *plastic heat shield.* Definitely works in a APS M4, ICS M4, and JG M4 CQB.

This LiPo stick also fits in a G36 handguard.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

* Summary
Very nice LiPo for airsoft guns at a great price! There is absolutely no reason to buy the more expensive Firefox or Flame brands. The main wires are pretty long (slightly over 140mm incl. connector), while the balance tap measures around 80mm. I usually get rid of the Tamiyas and convert them to high-current T-connectors instead.

* Application
One of these stick LiPos fits nicely in a buffer tube if you are using a Magpul MOE stock.

But you can *double* the capacity (ie. to 2400mAh) if you use two of these LiPos in an H&K 416-style crane stock in a parallel configurationwith a parallel adapter, of course, that you can solder on your own. More info here: http://1st-sword.com/forum/viewtopic.php?f=23&t=1810&p=15998#p15998

You can do the same parallel configuration with many other front-wired M4s that still use the *plastic heat shield.* Definitely works in a APS M4, ICS M4, and JG M4 CQB.

This LiPo stick also fits in a G36 handguard.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save