New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy nano-tech 1400mAh 3S 15 ~ 25C Lipo AIRSOFT Pack

Turnigy nano-tech 1400mAh 3S 15 ~ 25C Lipo AIRSOFT Pack

Shipped From:
  • USA
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 10,10
status:
In voorraad
SKU:
NG1400B.3S.15
WANT FREE SHIPPING? Click here to find out more!

Als het gaat om het zetten rondes neer bereik, niemand wil compromis over de vuurkracht! dat is de reden waarom de legendarische Turnigy nano-tech accu's zijn nu beschikbaar voor Airsoft combat. Hogere motortoerental, minder spanning sag en uitgebreid bedrijfstijden gelijk betere prestaties van je wapen van keuze.

De nano-tech Airsoft serie beschikken ook over 5C lading ratings brengen je terug in de frontlinie sneller!

Krijg een oneerlijk voordeel en zorg ervoor dat je tegenstanders weten dat ze werden uitgevoerd door nano-tech hebben genomen!

Spec.
Capaciteit: 1400mAh
Voltage: 3s1p / 3S Cell / 11.1V
Ontlading: 15C Constant / 25C Burst
Gewicht: 115g (met inbegrip van draad, plug & geval)
Afmetingen: 128x7x20mm (per stuk)
Balance Plug: JST-XH
Kwijting Plug: Mini-Tamiya (Mini Molex)

De nano-kerntechnologie lithium ion batterijen is de toepassing van nanometer geleidende additieven.

1) De nanometer geleidende additieven vormen ultrasterke elektronen geleidend netwerk in de electroden waarop elektronische geleidbaarheid te verhogen. 2) Deze toevoegingen zorgen voor een supersterke mogelijkheid voor de imbibitie in de dragervloeistof om meer ionkanalen te leveren. Dit verbetert het vermogen van ionen transmissie en ionendiffusie. Door het verbeteren van de elektronische geleidbaarheid en ion transmissie, wordt de impedantie verminderd en de polarisatie van een hoog percentage ontlading daalt sterk.

Voordelen ten opzichte van traditionele batterijen Lipo:
-Power Dichtheid bereikt 7,5 kw / kg.
-Minder Voltage sag in hoog tempo ontlading, waardoor meer vermogen onder belasting.
Intern impedantie zo laag als 1.2mΩ bereiken vergeleken met die van een standaard 3mΩ LiPoly.
-Meer Thermische controle, pak doesnt meestal overschrijden 60degC
-Dikte Zwelling tijdens zware belasting is momenteel niet meer dan 5%, vergeleken met 15% van een normale LiPoly tijdens zware belasting.
-Hogere Capaciteit tijdens zware ontlading. Meer dan 90% bij 100% C rate.
-Fast In staat rekening te brengen, tot 15C op sommige batterijen.
-Langere Cyclus leven, bijna het dubbele van die van de standaard LiPoly technologie.

* De lengte van saldo opladen draad kan variëren

  • Sku NG1400B.3S.15
  • Brand nano-tech
  • Gewicht 162.0000
  • Lengte 126.00
  • Packaging Width 7.00
  • Hoogte 21.00
  • Capaciteit ( mAh ) 1400.00
  • Discharge ( c ) 15.00
  • Max Charge Rate ( C ) 5.00
  • Lengte - A ( mm ) 128.00
  • Hoogte - B ( mm ) 20.00
  • Width-C(mm) 7.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

ottimi di buona qualita plusplusplusplus plusplusplusplus plusplusplusplus plusplusplus plus

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ottimi di buona qualita plusplusplusplus plusplusplusplus plusplusplusplus plusplusplus plus

best lippo for my airsoftgun..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

best lippo for my airsoftgun..

(continued)
for tight fitting AEGs. To date, the most extreme setup I have is inside my PDW's rail (After much, MUCH modification) so almost anything is possible. If one had the time you could easily cut and dremmel material to fit inside any rail system. In said PDW, I've ran it 25-30RPS at 360FPS no problem, however I'm currently finishing a DSG build that includes a riot spacer'd SP150 and Lonex titan A2. These should put me at 40-50RPS @ 400FPS if all goes well. I will post another review to see how this little pack handles that setup! Overall, HIGHLY recommend pack!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

(continued)
for tight fitting AEGs. To date, the most extreme setup I have is inside my PDW's rail (After much, MUCH modification) so almost anything is possible. If one had the time you could easily cut and dremmel material to fit inside any rail system. In said PDW, I've ran it 25-30RPS at 360FPS no problem, however I'm currently finishing a DSG build that includes a riot spacer'd SP150 and Lonex titan A2. These should put me at 40-50RPS @ 400FPS if all goes well. I will post another review to see how this little pack handles that setup! Overall, HIGHLY recommend pack!

Quite the little punch from such a small lipo. I ordered both this, and the 1200mah version of this 3s lipo. The only major difference is a VERY slight, and almost unnoticeable thickness difference. I would opt for this lipo.

Uses: Light-moderate upgraded AEGs. If your smart you'd use this lipo in an efficient setup. This rips when paired with a decent AEG, but SHINES when used with a fine tuned gun. This being a lipo, I'd recommend, as I always do when it comes to airsoft replicas and lipos, to invest in a Mosfet. The best mosfet units are actually the hand made ones by people whom know what they are doing, at the time of this review I recommend any unit using the IR3034.

Fitment: Yes, this fits perfectly in Crane stocks. Two cells on one side, and another on the other. There is ample wire, so when you do change the connector to Deans or TX60, I'd recommend shortening the wires. That is preference however. I've also had success fitting these in pretty much every AEG I've tried it with. That includes all types of G36, M4s, Mp5s, etc etc. Very versatile battery pack.


Performance: With an average AEG with an M120 expect solid 20-25RPS, depending on your setup. A tuned AEG can push 30 it all depends on your setup. Being a tech for 6 years I am very confident that this pack can and will meet your needs and expectations.


Extra notes: I personally use this as my go to pack

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quite the little punch from such a small lipo. I ordered both this, and the 1200mah version of this 3s lipo. The only major difference is a VERY slight, and almost unnoticeable thickness difference. I would opt for this lipo.

Uses: Light-moderate upgraded AEGs. If your smart you'd use this lipo in an efficient setup. This rips when paired with a decent AEG, but SHINES when used with a fine tuned gun. This being a lipo, I'd recommend, as I always do when it comes to airsoft replicas and lipos, to invest in a Mosfet. The best mosfet units are actually the hand made ones by people whom know what they are doing, at the time of this review I recommend any unit using the IR3034.

Fitment: Yes, this fits perfectly in Crane stocks. Two cells on one side, and another on the other. There is ample wire, so when you do change the connector to Deans or TX60, I'd recommend shortening the wires. That is preference however. I've also had success fitting these in pretty much every AEG I've tried it with. That includes all types of G36, M4s, Mp5s, etc etc. Very versatile battery pack.


Performance: With an average AEG with an M120 expect solid 20-25RPS, depending on your setup. A tuned AEG can push 30 it all depends on your setup. Being a tech for 6 years I am very confident that this pack can and will meet your needs and expectations.


Extra notes: I personally use this as my go to pack

What a battery! I really like this in the dboys CASV. They are very slim and able to slip between the barrel and side rails with the middle pack laying flat. Combine this battery with the SHS long torque motor, 120 factory spring and it is a hoss!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What a battery! I really like this in the dboys CASV. They are very slim and able to slip between the barrel and side rails with the middle pack laying flat. Combine this battery with the SHS long torque motor, 120 factory spring and it is a hoss!

Fits Masada handguards! I know many who own this gun are having problems finding a battery that fits. This one fits fine!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fits Masada handguards! I know many who own this gun are having problems finding a battery that fits. This one fits fine!

i have 2 of these and just ordered 2 more they will fit the m4 handguard and in a crane stock (1 in the buffer tube,, 1 down each side) they work great ,, the lipo alarm does beep on semi from time to time but doesnt stay on even with a fresh charge ,, i have played for 5 hours shooting over 5000 rounds and the green lights on lipo monitor were still on

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i have 2 of these and just ordered 2 more they will fit the m4 handguard and in a crane stock (1 in the buffer tube,, 1 down each side) they work great ,, the lipo alarm does beep on semi from time to time but doesnt stay on even with a fresh charge ,, i have played for 5 hours shooting over 5000 rounds and the green lights on lipo monitor were still on

product's dimension & discharge rating is just right for our airsoft rifles.very fast & makes my unit crazy with rate of fire.a must with units with batteries located in their buttstock and quadrailings as their handguards.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

product's dimension & discharge rating is just right for our airsoft rifles.very fast & makes my unit crazy with rate of fire.a must with units with batteries located in their buttstock and quadrailings as their handguards.

This is a fantastic pack. Fits in all current KWA AEGs - crane stock, M4 front, G36 front, full rear.

Excellent ROF and easily pulls M120 springs on stock motors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a fantastic pack. Fits in all current KWA AEGs - crane stock, M4 front, G36 front, full rear.

Excellent ROF and easily pulls M120 springs on stock motors.

I purchased this for a modified Classic Army M4 with a systema magnum motor and a 120 spring. It turns the gun over at 30 rounds per second (measured on audacity) which is exactly the same as my intellect 9.6v 4600 mah large type. This fits perfectly in a crane stock and will last all day.
Excellent buy and cheap enough to get a few just in case.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this for a modified Classic Army M4 with a systema magnum motor and a 120 spring. It turns the gun over at 30 rounds per second (measured on audacity) which is exactly the same as my intellect 9.6v 4600 mah large type. This fits perfectly in a crane stock and will last all day.
Excellent buy and cheap enough to get a few just in case.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save