Turnigy Park250 borstelloze Outrunner 2200kv

• Overall
• Quality
• Value

Great engine

Nov 18, 2019

Great performance. Lots of Power. Use them in aircombat planes and never failed. Low price and weight.

• Overall
• Quality
• Value

Great engine

Nov 18, 2019

Great performance. Low weight and price. Use them in air combat/ dogfight planes and never failed. Lots of Power. Small size also.

• Overall
• Quality
• Value

Nice little motor.

Nov 05, 2019

I have installed the motor in my well-used own-design indoor plane. Have not had a chance to fly it yet but it taxies fine.

• Overall
• Quality
• Value

Excellent

Oct 31, 2019

Small, light, and very poweefuf

• Overall
• Quality
• Value

Turnigy Park250 brushless outrunner 2200KV

Sep 03, 2019

Motor going OK so far in a 330gm 900mm span home
built vintage model with and 6" x 4" prop. As others have
mentioned the allen keys necessary for this motor are
a problem. Could not get anything to fit the prop saver
screws so hope they do not come loose. Also wires into
the back of motor look fragile

• Overall
• Quality
• Value

Motor

Jul 24, 2019

Great value, took 7 months to get here, as it was on back order

• Overall
• Quality
• Value

OK

Mar 22, 2017

Utilisé en 2S 300mA Nanotech et une 6x3 GWS ou 7x3,5 GWS pour un racer EIM.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 26, 2016

Motor is ok. Simpler Brushless motor but is sufficient for my small park flyer. If you would like a better quality motor I would take a step up to a little bit more expensive Turnigy motor. Overall I have very good experiences with the Turnigy Brushless motors. The used Allen Keys are however 1 step too small from my opinion (1 mm).

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 27, 2016

I chose this motor to match with my newly purchased Mini Crack Pitts Biplane. The motor that was recommended for this EPP shocky was too expensive, in my opinion. I've found that this Park250 motor works just fine without any problems at all. This is a fine motor as advertised.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 05, 2016

Runs like a champ on my scratch built, 3-channel twin tail-boom foamie trainer in a pusher configuration. Paired it with a HK Blue Series 12A ESC, Zippy 2S 800 & 1000mah packs, and a Gemfan 7x3.8SF trimmed down to 5.75" and the tips profiled like a stock one. That setup has more than enough power for a model with an AUW of 215 grams; I almost never go WOT, but it still stays pretty cool when I do!