Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy Park250 borstelloze Outrunner 2200kv

Generating Links

Turnigy Park250 borstelloze Outrunner 2200kv

Prijs:

Now save bespaar € 0,00 € 0,00

€ 12,14
Toestand:
Uit voorraad!
SKU:
Park250-2200
Geen verzendkosten? Klik hier meer leren!

Ontworpen om betrouwbare en schone stroom te leveren voor 3D parkflyers. Turnigy EasyMatch Park250 borstelloze outrunner zal meer stroom te voorzien en met zijn hoge efficiency, lange looptijden.
Een kwaliteit motor, speciaal gebouwd voor vliegtuigen ontworpen om te vliegen met een 50 watt borstelloze outrunner.

Spec.
Batterij: 2 Cell /7.4V
RPM: 2200kv
Max stroom: 7A
Geen belasting stroom: 7.4V / 0.45A
Huidige capaciteit: 8A / 15sec
Inwendige weerstand: 0,25 ohm
Gewicht: 14g (zonder connectors)
Diameter van de as: 2mm
Afmetingen: 35x23mm

Verplicht;
10A ESC
2S Li-Po / 6 cell Ni-MH / Ni-Cd
5.5x4.5 ~ 8x6 (SF) prop
Geschikt voor sport en de schaal vliegtuigen met een gewicht van 6 tot 12 ounces (170g-340g).

  • Kv ( tpm / v ) 2200.00
  • Max Currents (A ) 7.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 7.00
  • Vermogen ( W) 50.00
  • Shaft A ( mm ) 2.00
  • Lengte B ( mm ) 26.00
  • Can Diameter C ( mm ) 23.00
  • Kan Lengte D ( mm ) 14.00
  • Totale lengte E ( mm ) 35.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Raibanowa | Geverifieerde koper

  • Overall
  • Quality
  • Value

Great engine

Nov 18, 2019

Great performance. Lots of Power. Use them in aircombat planes and never failed. Low price and weight.

Raibanowa | Geverifieerde koper

  • Overall
  • Quality
  • Value

Great engine

Nov 18, 2019

Great performance. Low weight and price. Use them in air combat/ dogfight planes and never failed. Lots of Power. Small size also.

Mike | Geverifieerde koper

  • Overall
  • Quality
  • Value

Nice little motor.

Nov 05, 2019

I have installed the motor in my well-used own-design indoor plane. Have not had a chance to fly it yet but it taxies fine.

Pete | Geverifieerde koper

  • Overall
  • Quality
  • Value

Excellent

Oct 31, 2019

Small, light, and very poweefuf

Lynn | Geverifieerde koper

  • Overall
  • Quality
  • Value

Turnigy Park250 brushless outrunner 2200KV

Sep 03, 2019

Motor going OK so far in a 330gm 900mm span home
built vintage model with and 6" x 4" prop. As others have
mentioned the allen keys necessary for this motor are
a problem. Could not get anything to fit the prop saver
screws so hope they do not come loose. Also wires into
the back of motor look fragile

Alans271 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Motor

Jul 24, 2019

Great value, took 7 months to get here, as it was on back order

Alain | Geverifieerde koper

  • Overall
  • Quality
  • Value

OK

Mar 22, 2017

Utilisé en 2S 300mA Nanotech et une 6x3 GWS ou 7x3,5 GWS pour un racer EIM.

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 26, 2016

Motor is ok. Simpler Brushless motor but is sufficient for my small park flyer. If you would like a better quality motor I would take a step up to a little bit more expensive Turnigy motor. Overall I have very good experiences with the Turnigy Brushless motors. The used Allen Keys are however 1 step too small from my opinion (1 mm).

plmcc01 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 27, 2016

I chose this motor to match with my newly purchased Mini Crack Pitts Biplane. The motor that was recommended for this EPP shocky was too expensive, in my opinion. I've found that this Park250 motor works just fine without any problems at all. This is a fine motor as advertised.

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 05, 2016

Runs like a champ on my scratch built, 3-channel twin tail-boom foamie trainer in a pusher configuration. Paired it with a HK Blue Series 12A ESC, Zippy 2S 800 & 1000mah packs, and a Gemfan 7x3.8SF trimmed down to 5.75" and the tips profiled like a stock one. That setup has more than enough power for a model with an AUW of 215 grams; I almost never go WOT, but it still stays pretty cool when I do!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

Accessoires