Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Turnigy Sentilon100A HV 5-12S BESC (Ver4)

Turnigy Sentilon100A HV 5-12S BESC (Ver4)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
212 g
SKU:
TR_S100A-HV
Product
Omschrijving
Turnigy Sentilon 100A HV 5-12S Speed ​​Controller (Versie 4)
De Sentilon 100A HV aankan 12 LiPoly cellen in serie, dat is 36 NiMH cellen!
Dit BESC dankt zijn hoge spanning mogelijkheid om de VS wordt ingevoerd Fairchild mosfets gebruikt en een hoge kwaliteit compnentry.
Nu met een ultra-fast 12 MHz CPU. Sneller klok fietsen voorkomen sync verlies met een aantal grote motoren *
Een garantie van 12 maanden, worden de Sentilon serie BESCs gegarandeerd tegen fabricagefouten en slechte kwaliteit componenten.

Cont Current: 100A
Burst Current: 110A
BEC Mode: N / A (geen BEC)
Cells Lipo: 5-12
NiMH: 15-36
Gewicht: 125g
Grootte: 60x60x11mm
CPU Clock snelheid: 12 MHz
LET OP: Voor sommige grote motoren, moet u 'High' timing-modus te gebruiken. Doet u dit niet zal resulteren in een verbrande esc.

Programmeerbare, zowel via de controller en optionele programmering kaart. De programmering kaart is een uitstekende item als het direct vertelt de gebruiker de huidige instellingen en met een paar simpele klikken van de toetsen, kan de gebruiker de instellingen te wijzigen en hebben grafische geruststelling van deze wijzigingen.
De programmering kaart is een uitstekend punt en eenvoudig te gebruiken!
* Sync optreedt wanneer een ESC CPU niet snel genoeg om de synchronisatie te gaan met de motor kan de controle van de 3 aansluitingen. Vaak beschreven als een piepend geluid, zal synchronisatie verlies een plotseling verlies aan de macht totdat de ESC kan veroorzaken timing weer met de motoren polen en terugvallen in Sync. Dit fenomeen is niet een ESC-storing, in plaats van een onverenigbaarheid met de ESC, Motor, het aantal cellen en prop snelheid en meestal alleen ooit gebeurt op zeer grote motoren.
De Turnigy 100A Sentilon draait nu een 12MHz CPU, de snelste in de markt! Zorgen perfect synchroon met de snelste motoren en snappiest van de gashendel bewegingen!
Product
Specifications

Aanvullende Informatie

  • Sku:
    TR_S100A-HV
  • Brand:
    Nee
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    212.00
  • Lengte:
    182.00
  • Breedte:
    20.00
  • Hoogte
    145.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Easy to set up using the programming card. I am using an 8 cel set up with a 325KV motor - 17x12 APC prop. Over 20 runs with no problems. The only problem I am having is trying to program a throttle curve on a Futaba 8uaps Tx to give more power lower down the curve. When the Tx mix is activated it goes to full power at 25pcnt throttle. Any thoughts? Hence only three points for quality, but good value overall.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
exelent controleur quipe mon f3a il est coupl avec un xpower f3a
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Upgrade info I received from HK:
The ESC that you received seems to be upgraded version with same specifications, however it comes with antispark (the red lead has special anti spark resistor in it) and the capacitor set that you named as battery is designed to remove ripple current going from the ESC to receiver, added, third capacitor increases motor running smoothness, run the ESC and enjoy!

I used the programming card to set for 8s voltage cut off. The ESC works well (EF Power 90, turning an APC17x10 for Pattern use). After 8 ground runs it delivers a smooth power response and no overheating.
The only negative I would note would be that this ESC it is not compatible with my Futaba 8UAPS Tx throttle curve mixing, or reverse setting. Better to use the throttle exponential option to set the power curve. Otherwise, I would say good value for $.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Perfect... cheap, and does a wonderful job on a rotomax 50cc-electric replacement :-).
there is only one downside to it, that is the manual, that doesn't clearly indicate how to program it... It was a hell of a job to enter the program-mode with a orange-rx...
So I switched over to 35mhz to program it. Afterwards I've found the 2.4ghz-trick, branching the cable to channel 1 -30seconds after adding the battery to the receiver did the trick(with full throttle at transmitter of course)... Seems like 2.4 needs some additional time :-)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this ESC to a Turnigy Rotomax 1.60 .. while programming it in high timing mode ... during the first test at home .. stopped and caught fire ... they are a waste of money
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hallo
Das ist mein 8er Regler von Turnigy, und bin mal wieder sehr Zufrieden Prei-Leistung findet man kaum was besseres.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
mal producto, se me quemo al mes de usarlo, estoy intentando ver sim me lo reconocen por la garantia no se que va a pasar!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Purchased this unit from a friend who had a valid order number from HK. Brand new out of the sealed package and would not arm.....not matter what configuration. Contacted warranty and they would do nothing because it was more than a year, regardless of all the problems HK has had with this unit, even the chip had the ID grinded off to conceal its origin!. Defective product. Would never purchase another one again. Great pricing.....horrible customer service!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good ESC

Using it on an electric scooter. 8s 16A/H battery pack. Made a modification to the heat sink though. I know this probably wont help any helicopter guys (or maybe it will). Attached a bigger heat sink with a cooling fan. After multiple full throttle blasts, ESC just slightly warm to the touch

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
would like to advise all those who buy this particular esc
chrisimopioisoun not never, ever the governor has done tests by highly experienced technicians and here in Greece.
With the governor's vbar works fine.

I challenge everyone to try, not only for this esc but for the 120HV OPTO
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
user_manual download now [2313kb]

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.