Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global

Turnigy Sentry 40amp Speed ​​Controller

Turnigy Sentry 40amp Speed ​​Controller

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
65 g
SKU:
TR_S40A
Product
Omschrijving

Turnigy Sentry 40A Brushless Speed ​​Controller
De Sentry reeks BESCs hebben een ingebouwde batterij cel protector.
Door het aansluiten van de connector in de batterijen op te laden poort van de BESC kan ervoor zorgen dat het pakket is evenwichtig en dat de verpakking daalt nooit onder een Recomended niveau. Dit zorgt ervoor dat uw pakket zal niet over-ontladen en vernietig je batterij.
Het is de beste manier om uw dure accu's te beschermen. Gezien in de meeste gevallen de batterij kost meer dan je BESC, het is een verstandige investering om een schildwacht te krijgen.

Cont Current: 40A
Burst Current: 43A
BEC Mode: Switchmode
BEC: 5V / 3A
Voltage: 5.6V ~ 22V
Gewicht: 40 g
Grootte: 55x28x15mm

Programmeerbare, zowel via de controller en optionele programmering kaart. De programmering kaart is een uitstekende item als het direct vertelt de gebruiker de huidige instellingen en met een paar simpele klikken van de toetsen, kan de gebruiker de instellingen te wijzigen en hebben grafische geruststelling van deze wijzigingen.
De programmering kaart is een uitstekend punt en eenvoudig te gebruiken!

Batterij balans plug rechtstreeks verbinding met onze JST-XH stekkers op HXT, uitlijnen en Dualsky packs.

Product
Specifications

Aanvullende Informatie

  • Sku:
    TR_S40A
  • Brand:
    Nvt
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    65.00
  • Lengte:
    0.00
  • Breedte:
    0.00
  • Hoogte
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This ESC is simple to set up, especially when using the programmer card. I did have to re-program it one time, for some unknown reason.
However, I was quite disappointed when it burned out last night. I had it on a 48" Zagi, with a 3S lipo, and a Turnigy B2835-2700 and a Master Airscrew 5.5 X 4 prop. It flew well - plenty of thrust, but only lasted about 6 flights or so :-(
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using this for 18 months in a Mini Pulse with a KD A22-20L, and 3s 2200mAh - very happy, never had one issue. It is amazing, the plane saw lots of rough landings from my 7 years old student, 2 big crashes that sent the plane for total rebuilds, but the electronics are working just fine. Very happy with the choice.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this controller for my .25-class models. Great combination with Turnigy 35-42C 1100Kv. Peaks at 45amps - only small rise in temp. Usually fly at 10-30amps where it is cool. I use 4 micro servos BEC peak at Which I'm sure you know total 1.5amps can use with larger servos. Will definitely get more of these. With the motor TR-35-42c-1100 rpm and a blade 11x5 set adapted to these models. Very reliable even when using extremely mild in most it can also be used as a controller for helicopter having the function of the governor system maintains constant main rotor rpm. I recommend it for the low price and of course for its excellent performance.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my fouvorite esc
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great controler withe a mini balance control for all batteries I use this items for my skywalker, the programming is easy but I prifer the controling card, I use a

14,8V 4S 5000mah 20C zippy flightmax and when I have finish a good flight, I look all cells with my cheap mini voltmeter turnigy and all cells are balancing very amazing and very usefull for my big batteries.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This a awesome speed controller only wish they had the 30amp also for smaller applications like the Bixler plane. Would never fly again with out cells being monitored, can't remember the last time my batteries went puffy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Rock solid reliable ESC. They are a little heavy so not great where weight is an issue. 5 Stars here!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
no need for the balance plug..! i never use it.. it adds extra weight..! but its exactly the same as the plush esc.. excellent quality and heavy duty
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
In the manual, write to connect first balance connector and then plus and then - but try do it with connectors XT60 :) While still working without any problems:)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I finally got my helicopter in the air. I've got this ESC with a Typhoon 2215motor, 3 HXT900 servos, a N590 KDS tail servo and a HK501B gyro setup. This ESC is a must for a 450 heli setup especially if you want your batteries to last longer. The direct cell monitor, monitors each cell individually and as soon as one of the cells reaches the set point the ESC slow down the head speed which means land now before you have to auto rotate to the ground. It does give you enough time to bring it in and land it before it slows right down and stops the engine. With the typhoon 2215 motor, timing set to medium and a 12tooth pinion I am reading a optimum head speed of 2850rpm with a lot of torque for 3D or aerobatics.

I only have one suggestion for this product, the battery monitor cable should have been at least 2" longer for better mounting options, but I did manage to connect it to the battery will increase the cable's length at a later stage. As us heli pilots know by this stage the battery normally goes flying through the windscreen of the plastic canopy and would pull this cable with if the connector is not properly mounted. Thank you HK
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Turnigy ESC Manual download now [1976kb]

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.