New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy Super Brain 80A Brushless ESC

Turnigy Super Brain 80A Brushless ESC

Shipped From:
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 61,80
status:
In voorraad
SKU:
TSB80A
WANT FREE SHIPPING? Click here to find out more!

Ultra snelle microprocessor gestuurde, extreem lage weerstand circuit en chip design, en aluminium heatsink voor een betere thermische dissipatie zijn slechts enkele van de functies in de nieuwe Turnigy Super Brain scala van borstelloze regelaars.
De Super Brain borstelloze esc is een high performance ESC staat standaard en wedstrijden.
Volledige bescherming, met inbegrip van signaalverlies, te hoge temperatuur.
Programmeerbare via USB, PC of Tx.
Compatibel met alle radio-systemen.

Kenmerken:
Ondersteunt de 'Turnigy USB Linker' om het ESC door de computer te programmeren.
Internet upgradeable ESC firmware.
Geïntegreerde flight data logger, records gegevens voor de gehele vlucht, zoals:
- Spanning
- Actueel
- Temperatuur
- Motor RPM
- Reizen Throttle

Programmeerbare instellingen;
Startup (Standaard Standard / Soft / hard)
Low Voltage cutoff (Standaard 6.0 / 7.2 / 8.4 / 9.0 / 12.0 / 15.0 / 18.0V)
Stroombegrenzing (Standaard Standard / Erg gevoelig / Ongevoeligheid / Uitgeschakeld)
Brake (Standaard Geen / Soft / Hard)
PWM-rate (8/12/16 KHz)
Timing (Standaard Auto / Laag / Midden / Hoog)
Cutoff type (Standaard Hard / Soft)
Gouverneur-modus (Standaard Auto / Laag / Hoog)

Spec.
Constant Current: 80A
Burst Current: 90A
Batterij: 2-6S LiPoly
BEC: 5V / 4A (Switching BEC, ondersteunt boven de 4 digitale servo)
Motor type: Brushless
Afmetingen: 71 x 26,5 x 15mm
Gewicht: 52g
Throttle range: 640us

** Programmeerbare met Turnigy programmering Box en Turnigy USB Linker, zie gerelateerde items hieronder.
We raden klanten aan de esc met hun Tx niet programmeren.

  • Sku TSB80A
  • Brand Turnigy Super Brain
  • Capaciteit ( mAh ) -
  • Gewicht 69.0000
  • Lengte 150.00
  • Packaging Width 17.00
  • Hoogte 105.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is the second one of these I have purchased running it in a Copterx 500, no real soft start and govenor mode is rubbish too, waste of money in my opinion....................................................................................................................................................................................................................................

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is the second one of these I have purchased running it in a Copterx 500, no real soft start and govenor mode is rubbish too, waste of money in my opinion....................................................................................................................................................................................................................................

Overall a great esc, a little to short battery cables and the current recorder is way off. Compared to my EagleTree v3 logger this is measuring about 20A to LOW!!! WTH! Have ordered one more, so will compare that aswell, maybe its just a fault on this particular esc, perhaps there is a newer firmware that will fix this issue... And also the weight is not 52g but 57,5g.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overall a great esc, a little to short battery cables and the current recorder is way off. Compared to my EagleTree v3 logger this is measuring about 20A to LOW!!! WTH! Have ordered one more, so will compare that aswell, maybe its just a fault on this particular esc, perhaps there is a newer firmware that will fix this issue... And also the weight is not 52g but 57,5g.

I don't know what happened to my original review, but here goes again! I'm using this on a HK500TT FBL. I had brownout problems with the FuBar controller, and only partially solved them by fitting a 10,000uf capacitor. I then fitted a Hobbywing 8A UBEC, and that resolved the problem. I don't think the 4A SBEC in the Superbrain is quite up to running digital servos on a 500 size FBL heli, particularly with a V-Bar or clone type FBL controller, since they seem to be prone to browning out at relatively high voltage. I've since removed the UBEC, and run directly off a small 2s LiFe pack. I have the Superbrain ESC lead connected to a servo extension, with the red ( ve) lead disconnected from the servo extension. With the extension lead conveniently mounted on the outside of the heli, I can easily disconnect the ESC lead to hook up to the USB linker to upload my data logs. The data-logging is the thing I like best about this ESC, and I also much prefer programming the ESC from the software to doing it with the TX. All the Superbrains also have a really tight governor mode. The gain is so high, however, that you have to avoid switching between flight modes with different flat throttle curves, unless your TX has a delay function built in. Otherwise, you can wear out the OWB in a very short time. Instead, I set up a mix in my TX, to add throttle using one of the Aux levers, which become

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I don't know what happened to my original review, but here goes again! I'm using this on a HK500TT FBL. I had brownout problems with the FuBar controller, and only partially solved them by fitting a 10,000uf capacitor. I then fitted a Hobbywing 8A UBEC, and that resolved the problem. I don't think the 4A SBEC in the Superbrain is quite up to running digital servos on a 500 size FBL heli, particularly with a V-Bar or clone type FBL controller, since they seem to be prone to browning out at relatively high voltage. I've since removed the UBEC, and run directly off a small 2s LiFe pack. I have the Superbrain ESC lead connected to a servo extension, with the red ( ve) lead disconnected from the servo extension. With the extension lead conveniently mounted on the outside of the heli, I can easily disconnect the ESC lead to hook up to the USB linker to upload my data logs. The data-logging is the thing I like best about this ESC, and I also much prefer programming the ESC from the software to doing it with the TX. All the Superbrains also have a really tight governor mode. The gain is so high, however, that you have to avoid switching between flight modes with different flat throttle curves, unless your TX has a delay function built in. Otherwise, you can wear out the OWB in a very short time. Instead, I set up a mix in my TX, to add throttle using one of the Aux levers, which become

Dobry regulator. W 100pcnt procentach kopia HiFei seria G tylko z logerem. Dziala na oprogramowaniu producenta oryginalu

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Dobry regulator. W 100pcnt procentach kopia HiFei seria G tylko z logerem. Dziala na oprogramowaniu producenta oryginalu

With the data logger, it's really easy to find the best combination (brusless, ESC, propeller). Just check your real flight parameters (A-current, V, RPM, Temperature, ... ) and find easily the best propeller. Don't forget to buy the USB linker.
Will buy this ESC next time for sure.
Great value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

With the data logger, it's really easy to find the best combination (brusless, ESC, propeller). Just check your real flight parameters (A-current, V, RPM, Temperature, ... ) and find easily the best propeller. Don't forget to buy the USB linker.
Will buy this ESC next time for sure.
Great value.

Good product, I am using it with my Ultra Stick 40 size. Don't set the start up speed to normal though, far too slow for aerobatics. Mine is now set to Fast Start and all is good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good product, I am using it with my Ultra Stick 40 size. Don't set the start up speed to normal though, far too slow for aerobatics. Mine is now set to Fast Start and all is good.

Got this 5days ago, fast shipping etc and so far I am impressed with it. My firmware is probably the latest ending something like 2524 **12MB 8004 so I didn't do any update. First flight: settings I chose needed tweaking so I changed the settings and timing etc and it flew well on governor mode low, I had linear throttle with throttle hold. Excellent ******

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got this 5days ago, fast shipping etc and so far I am impressed with it. My firmware is probably the latest ending something like 2524 **12MB 8004 so I didn't do any update. First flight: settings I chose needed tweaking so I changed the settings and timing etc and it flew well on governor mode low, I had linear throttle with throttle hold. Excellent ******

Mit Abstand einer der Besten Regler im 80A Bereich, sehr feinfuehliges regeln, kein stottern wie bei anderen Reglern, der 4A BEC versorgt auch 5 Digital Servos ohne Probleme, absolutes TOP PRODUKT, kan ich nur empfehlen

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mit Abstand einer der Besten Regler im 80A Bereich, sehr feinfuehliges regeln, kein stottern wie bei anderen Reglern, der 4A BEC versorgt auch 5 Digital Servos ohne Probleme, absolutes TOP PRODUKT, kan ich nur empfehlen

Works great except for the brake. I'm using a folding prop on a 4m sailplane, and the brake make a loud noise but does not stop the prop spinning enough for it to fold. I have to nose-up and stall the glider, before the prop will stop spinning and fold. This happens even with the Hard Brake option (there seems to be no difference between Hard and Soft brake).
Otherwise it is great, and the built-in logger is very useful to see how the motor and battery are performing. My setup pulls 77A peak on 4S, averaging about 70A, and I run it for about 20 to 30 seconds each time. The ESC is barely warm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great except for the brake. I'm using a folding prop on a 4m sailplane, and the brake make a loud noise but does not stop the prop spinning enough for it to fold. I have to nose-up and stall the glider, before the prop will stop spinning and fold. This happens even with the Hard Brake option (there seems to be no difference between Hard and Soft brake).
Otherwise it is great, and the built-in logger is very useful to see how the motor and battery are performing. My setup pulls 77A peak on 4S, averaging about 70A, and I run it for about 20 to 30 seconds each time. The ESC is barely warm.

My favorite ESC, have over 10 of them, all in planes from 80cm up to 2,3m, soarer, speeder, parkflyer. from 20A up to 70A continus, from 3s up to 6s, works well. The only motor he was killed by, is an scorpion 4025-1390, that one is too much for him.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My favorite ESC, have over 10 of them, all in planes from 80cm up to 2,3m, soarer, speeder, parkflyer. from 20A up to 70A continus, from 3s up to 6s, works well. The only motor he was killed by, is an scorpion 4025-1390, that one is too much for him.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
Throttle stick programing Download [74]
Howto configur software for acurate logg Download [117]
SuperBrain80A Volt Log Download [128]
SuperBrain80 Current Log Download [137]
SuperBrain80A temp Log Download [136]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save