Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy T600 borstelloze Outrunner voor 600 Heli (880kv)

Generating Links

Turnigy T600 borstelloze Outrunner voor 600 Heli (880kv)


Now save bespaar € 0,00 € 0,00

€ 77,77
Aantal stuks:
Verzonden vanaf:
  • USA
  • Global
  • EU
Al gekocht
Geschatte aankomsttijd: Geen Geschatte Aankomsttijd [ ? ]
Geen verzendkosten? Klik hier meer leren!
Is uw 600 heli klaar voor het volgende niveau in de prestaties ?!
We zullen hier niet je niet meer vertellen dan om ervoor te zorgen bouten je heli 'zijn strak en de belangrijkste tandwielen tanden correct mazen, omdat deze motor is een koppel monster!
Afmetingen: 58mm x 49mm, 78mm (met as)
Gewicht: 363G
Kv: 880rpm / V
Turns: 8T
Voltage: 4 ~ 8S
Max stroom: 90A
Diameter van de as: 6mm
Lengte van de voorste as: 21.5mm
ESC: 100A
  • Kv ( tpm / v ) 880.00
  • Max Currents (A ) 90.00
  • Resistance ( mh ) 13.30
  • Max Voltage ( V ) 30.00
  • Vermogen ( W) 33.60
  • Shaft A ( mm ) 6.00
  • Lengte B ( mm ) 57.00
  • Can Diameter C ( mm ) 49.00
  • Kan Lengte D ( mm ) 33.00
  • Totale lengte E ( mm ) 78.00

Dimension Diagram Guide

  • attributeset-10


Upload video

Registreer u om video's te uploaden aanmelden of registreren

Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:

Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:

Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Carlos64 | Geverifieerde koper

  • Quality
  • Overall
  • Value


Dec 17, 2021

Super Drehmoment und Power in meiner Yacht bei 6s

Guy | Geverifieerde koper

  • Quality
  • Overall
  • Value


Jul 15, 2021

missing in the back a way to put a propeller

Luis Oliveira | Geverifieerde koper

  • Quality
  • Overall
  • Value

Very good

Jul 11, 2021

This is a big motor, maybe more suited to a 700-class helicopter. I have it mounted on a JS models TZ-50 (bought here at HK) which I converted to electric, in a 6S configuration. The power is there, no issues whatsoever. I recommend it.

Smasher | Geverifieerde koper

  • Quality
  • Overall
  • Value


Jun 23, 2021

I blew my inception boat motor up, and could not replace it with the same so i put one of these in , i am quite pleased with it it sounds awesome and goes like the wind sorry water, this motor is for a heli but works very well in my rc boat at 22 volts goes very nicely

Roby | Geverifieerde koper

  • Quality
  • Overall
  • Value


Feb 16, 2021

Ottimo motore, potenza da vendere!!!!! sono molto soddisfatto...

baytacoglu | Geverifieerde koper

  • Value
  • Quality
  • Overall

Very nice

Dec 01, 2019

The processing time took longer than usual for HK to send the item but I received it in a very good condition without any damage. The money paid for such a powerful motor is less than the half of many "high brand"'s motors and the motor looks to be very robust and powerful. I will use this motor on my HK 600 GT helicopter and look forward to see it performing in the skies.

KALPESH | Geverifieerde koper

  • Quality
  • Overall
  • Value

replacement shaft

Jan 12, 2017

What replacement shaft can I use? I need a longer shaft.

Audo Gianotti | Geverifieerde koper

  • Overall
  • Value
  • Quality

T600 880Kv

Dec 13, 2016

Hi, I've fitted this motor in a Sceadu 50, togheter with Hobbyking Yep 100A but I dont know the right timing, actually I set to auto.
But I'm afraid to stress to much the battery (Turnigy Nanotech 4000Mah 25-50 Amp.) Please let me know your suggestion. Thank you a lot.

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 14, 2016

In my opinion this motor is to large for a 600 size heli. The Align RCM-BL600XL brushless motor works great with the HK600GT heli. The Turnigy T600 would fly a 700 size heli.

weldit | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Sep 20, 2015

I have fitted this motor in my T-rex 550L dominator on 6s it is a perfect match 2400-2500 rpm and it has lots of power, I get about 5.30 mins very happy with that.
only think I had to do was change out the motors shaft for a longer one,
nice job HK.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
HK600 Frame Cut Download [131]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!