Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

Turnigy Talon Hexcopter (V1.0) Carbon Fiber Frame - 625mm

Turnigy Talon Hexcopter (V1.0) Carbon Fiber Frame - 625mm

QTY:

Now save bewaar € 11,70 € 11,70

Special Price € 46,82 € 46,82

You save bewaar € 11,70 € 11,70

Was  € 58,52

Stock:
Gewicht:
530 g
SKU:
9171000060

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

De Turnigy Talon V1.0 Hexcopter frame is gemaakt van hoge kwaliteit echte carbon fiber biedt zowel een fraai uiterlijk en prestaties. Onze engineers uiteengezet om een ​​Hexcopter kader zonder compromissen te maken, diverse materialen werden getest en afgewezen totdat ze besloten dat alleen echte carbonvezel zou voldoen aan de doelen die we hadden uit te bereiken in te stellen. Elk onderdeel werd gewogen en gemeten scheren louter gram waar mogelijk een lichtgewicht maar zeer stijf frame te bereiken. Er zijn geen compromissen toestaan ​​en geen van beide moet je.

De toegevoegde hefvermogen van een hex-configuratie maakt dit frame ideaal voor het vervoer grotere nuttige lading, zoals camera's en andere elektronische componenten. Dit zorgt voor een uitzonderlijke camera rig of gewoon een zeer flexibele en krachtige multi-rotor frame voor aerobatics!

De Talon Hexcopter is gemaakt van dezelfde hoogwaardige componenten die worden gebruikt in de immens populaire Talon V2 Quadcopter frame, maar we hebben opnieuw ontworpen de belangrijkste frame voor gebruik in een hex-configuratie.

Tijdens de ontwikkeling van de Talon V2 ons team nam de toch al populaire Talon frame en bestudeerde het ontwerp, gebaseerd op feedback van de multi-rotor gemeenschap en onze eigen ideeën we opnieuw het ontwerp van de motor montageplaten waardoor boven- of onderkant montage van 28 en 35 size borstelloze outrunner motoren (zie foto's voor de referentie van verschillende montagemogelijkheden). De verbeterde klemsysteem alleen onderging 3 re-ontwerpen tot onze engineers waren ervan overtuigd dat de perfecte kracht en gewicht te besparen combinatie was bereikt. Het middelste kader klemsysteem is bijna verdubbeld in grootte met een sterke brace op elke boom te garanderen. Elk aspect van dit frame werd grondig onderzocht en doordacht.

Al deze aandacht voor detail heeft geresulteerd in de elegante eenvoud die de Talon Hexcopter, een Hex kader dat we zijn zo trots op onze naam achter zoals u zal zijn om te bezitten zetten.

Wij bieden ook een volledige lijn van kwaliteit multi-rotor elektronica, zoals multi-rotor control board, ESC, motoren en nog veel meer, dus er is geen noodzaak om compromissen te sluiten op uw elektronica setup ook niet!

specs:
Gewicht: 440g (w / out elektronica)
Breedte: 625mm
Motor Bolt Holes: 16/19 / 25mm

vereist:
28-XX of 35-XX borstelloze motor outrunner x 6
18 ~ 25A brushless ESC x 6
8x4 ~ 10x4.7 propeller x 6 (3 standaard / 3 achteruit rotatie)
Multi-rotor control board
2500 ~ 3300mAh 11.1V LiPoly
4CH zender en ontvanger

Product
Specifications

Aanvullende Informatie

  • Sku:
    9171000060
  • Brand:
    Turnigy
  • Gewicht ( g)
    530.00
  • Lengte
    260.00
  • Breedte:
    60.00
  • Hoogte:
    123.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Looks very good quality and sturdy but I haven't built it yet.
Quality
Value
Overall
Quality
Value
Overall
Good quality carbon fiber and very lightweight. There is no assembly instruction inside the pack (or may be i have not received it). BTW, I test it with 920 KV motor with 8045 prop. I have enjoyed my first Hex-copter flight without any damage.I forgot to said that, i used CC3D flight controller and multistar bheli 20A ESC. some headless nuts are missing which are important, i used hot glue for this purpose.

Thanks Hk

Quality
Value
Overall
Quality
Value
Overall
Good frame, don't forget to thread lock the screws. Only complaint I have there isn't any room on the frame to mount anything. I manged to squeeze a gopro on the top, and put the esc on the arms, but it looks bad. I fit the battery underneath, but now I can't put a gimbal on it. Anyway, overall it's a solid frame, but I'd look at a tarot 610 or something instead.
Quality
Value
Overall
Quality
Value
Overall
I have been using this frame for about 6 months now and I am VERY happy with it. It is my first 'non-toy' size frame and it has served me well. It does however have some limiting factors so I will list the pros and cons as I see them.
Pros:
Very nice looking clean frame. Happy with the build quality and its looks. It's goes together easily and the flight characteristics are stable and balanced. Kit was complete with nothing missing/damaged/other. Booms were the same length and straight.
Cons:
A screw hole on 1 motor mount threaded when tightening to a boom. So I have put longer screws and nuts on all. I highly recommend doing this to ALL motor mounts where it meets the boom. No issues after that. Space - you run out of it. The gap between the top and bottom plate is only enough for wiring basically and I have since added some extra surfaces to mount the FPV gear.
Tips:
Longer screws and bolts on the motor mount plates where it secures to the boom. Lock-tight all screws. TAKE YOUR TIME putting it together and read the instructions. It is easy to put together but do it once and do it right. Protect the surface that you are building on, the landing gear will scratch it.

I would recommend this frame to anyone looking for a first one to learn on, but you will outgrow it. Saying that, I am awaiting a FPV250 frame which is much smaller and I will keep this as my mid-size frame.
Hope
Quality
Value
Overall
Quality
Value
Overall
This is a great looking kit. Don't be thrown off by the small box. The only thing that would make this better would be a larger diameter main hub. It's really small, so fitting anything other than the flight controller on there is difficult.
Quality
Value
Overall
Quality
Value
Overall
If you want FPV or a camera, buy the Tarot 680 kit. There's too much missing here to recommend it.
Quality
Value
Overall
Quality
Value
Overall
.















great frame with mainly good points have built a fairly serious one and the only problem I have found is although the frame is extremely crash resistant (have had some very hard ones) the clamps that hold the arms in the centre of the hub have a tendency to come loose so getting them tight takes time as parts settle and a gentle hand for getting the right amount of torque on the little m3 screws without stripping the aluminium tube nuts that hold it together however after a few hours flight and a few crashes parts seem to settle and stay tight AND THE MAIN THING YOU NEED TO KNOW is that the aluminium motor mounts at the end of the arms bend quite easily on high angle crashes while this isn't a problem if you can straighten them without snapping them but they are ten dollars each in the spare parts selection on hk .soooo with a frame selling for 80 dollars its a no brainer to just buy a whole new frame then you get a whole new frame in spares because you WILL bend those motor mounts otherwise a very good frame im happy with mine
Quality
Value
Overall
Quality
Value
Overall
Good workmanship, everything fits well and is quickly assembled.
Quality
Value
Overall
Quality
Value
Overall
This is an extremely nice kit. I own the Carbon Quad, X525, and plastic/glass quad. The Carbon Quad and this Hex Quad are by far superior and worth the extra money.

The carbon fiber is real carbon fiber, not the fake sticker stuff. The metal pieces are super light and work very well. Overall the kit fits together very nicely and is well put together. The 3 motor mount holes makes it easy to fit multiple types of motors. Currently I have the 350KV's on my Hex and the 750 KV's on my Quad. I think I prefer the 750's.

I really like that you can run the motor wires through the arm tubs for a cleaner looking craft. That is a real bonus. Keep in mind that carbon fiber is conductive so you will need to isolate your wire ends with heat shrink, tape or something to protect the leads from shorting against the carbon fiber.

The Hex is quite light for its size and is extremely sturdy. The only thing that would make it better is to have instructions, but it is easily figured out by looking at pics.

PROS:
-Lightweight
-Sturdy
-Looks really good
-Can run motor wires through tubes
-Has 3 motor mount hole configurations
-Ample space for electronics
-Easily assembled
-Can custom adjust configuration

CONS:
-No instructions
Quality
Value
Overall
Quality
Value
Overall
I got the same hex copter u got but the speed controlers I soderd all the black together and the red and wire the goes to the kk2 board to the main deans plug .is that ok or did I mess up.i saw it on u tube that u can soder all the black and red together to the deans plug
or do I need a power board . HELP ME
Quality
Value
Overall
View all reviews
Upload
Videos
  • Turnigy Talon Hexcopter Frame

  • Talon Hexacoter

Upload video
Upload
Files

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.