Turnigy Talon Quadcopter (V2.0) Carbon Fiber Frame 550mm

• Overall
• Quality
• Value

Customer Rated

Oct 24, 2015

Amazing quality comes with high quality parts, would like to see a couple of allen keys included for the screws, overall amazing.

• Overall
• Quality
• Value

Customer Rated

Jun 08, 2015

Great light frame, the only problem is that the aluminum motor mounts bend easily. There's also not a lot of space in the center for anything...

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 30, 2015

Very sturdy and light!

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 03, 2015

Great and lightweight carbon skeleton frame. If you want to fly a "X", you shouldn't use the cut outs in the bottom plate for battery straps because the battery would have an angle about 45 degrees, bad for the balance.

The Installation guide is without notes, make sure you install the booms and mounts in the right direction, the bigger diameter of the booms for motor mount ends. Note that the blocks also have a direction to mount and check you use the right side to screw in the alu blocks and mounts. Pushing the booms with the bigger ends in the blocks will bend them and the mounts won't hold at the thinner ends of booms.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 30, 2015

A bit of an arse to assemble. It seems that some of the carbon fibre parts are slightly different size to others. Almost like some parts were made on a Monday and others on a Friday. I had to use a bit of brute force and ignorance to get the thing together. The screws are pretty low quality and made of soft metal so make sure your allen keys/tools are an exact fit for the screws. Apart from that, once assembled it seems like a very solid and light frame. My Turnigy D2836/8 1100KV out-runners fit directly onto the motor mounts and the cables run nicely through the centre of the booms. I would't really recommend this for an absolute beginner unless they are handy with a few tools to bash and wallop it together.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 19, 2015

I have assembled this quad frame and while it is nice and light and appears to be quite strong I find I am disappointed in it's layout with respect to the positioning of ESC's without it looking like a birds nest!!

• Overall
• Quality
• Value

Customer Rated

Nov 02, 2014

Nice frame with good carbon quality and very light but with little room. It is stable and It can handle some crashes. Good frame but expensive.

-
CZ/SK

Dobr rm pre zaiatonkov alebo pokroilch ale ma mal stred pre upevnenie veci (musel som dorba). Zatia nemm ale chcem vyui FOV a Gimbal ale bojm sa e ho nebudem ma kam umiestni kee je celkom mal stred. Rm sa vyzer by celkom kvalitn a pevn s hlinkovmi chytkami pre motoreky. Myslm si e vzhadom na cenu sa viac oplat V1 ako tto V2.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 31, 2014

Awesome frame. Went together easily and in about 25 min. Extremely strong and almost no flexing under stress at the center plate. A little heavy, but excellent when landing.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 25, 2014

Esto es un marco muy bueno, fibra de carbono cruzada (dimetro 14 mm, 1 mm de espesor) con placas de carbono 2 mm de espesor para el cuerpo principal. Los soportes del motor y las abrazaderas del brazo son de aluminio ligero , Un motor 28 NTM serie encaja bien. Este kit tambin viene con algunos tornillos de los separadores de nylon para su tarjeta del controlador. solo tienes que utilizar sellador de rosca (loctite 242) este es mi primer quad de excelente calidad y precio

• Overall
• Quality
• Value

Customer Rated

Oct 02, 2014

Nice carbon quality but very poor fitting of the tubes in the collars!
The tubes diamaters are MUCH to large so Ive to decide either to grid down the tubes or to bore the collars - so Im really peeved for this!!!
Die Qualitt und Festigkeit der Rohre aus Carbon-Kreuzgewebe macht einen sehr guten Eindruck. Auch die Aluminium Klemmteile sind sauber gearbeitet und wirken hochwertig.
Leider passt keines der Rohre in keine der Aufnahmen!!! Wenn man ein Rohr "reinprgelt", biegt sich die Klemmschelle dermaen auf, dass man mit deren Bruch rechnen kann. Fr DAS Geld sollte man erste Qualitt erwarten knnen. Nun darf ich mich entscheiden, entweder die Rohre abzuschleifen (=> Sollbruchstellen) oder alls Aufnahmen aufzureiben - absolut zum Kotzen!