Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy TG9 9g / 1,6 kg / 0.12sec Micro Servo

Generating Links

Turnigy TG9 9g / 1,6 kg / 0.12sec Micro Servo

Prijs:

Now save bespaar € 0,00 € 0,00

€ 2,87
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
TG9
Geen verzendkosten? Klik hier meer leren!
Turnigy TG9, 9 gram micro servo.

Maat: 23x11x29 mm
Voltage: 3V ~ 6V
Gewicht: 9g / 0.32oz
Snelheid: 0.12 sec / 60 (4.8V)
Koppel: 1,6 kg-cm
Werken Temp: -30C ~ 60C
Teflon Bus, 19cm draad, coreless motor

Servo armen en schroeven meegeleverd

Dit product is CE getest en goedgekeurd zijn.

  • Servo Torque ( kg) ( min . 0,01 kg ) 1.60
  • Servo Snelheid ( Sec / 60deg ) 0.12
  • Servo A ( mm ) 30.00
  • Servo B ( mm ) 23.00
  • Servo C ( mm ) 25.00
  • Servo D ( mm ) 12.00
  • Servo E ( mm ) 32.00
  • Servo F ( mm ) 16.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 09, 2010

So its a nice little package and looks nice, good for the price and what not. But....... It really is what you pay for.



Very slow no good for any fast aerobatics. I got 4 and everyone i got was at different speeds. Then i noticed the sticky goopy looking muck they put in for grease. Took all servos apart and cleaned the goop out getting rid of lots of unwanted friction. Now they are a little faster. Remember though they are strong.

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 17, 2010

great servo's, use 4 of them in my scale 450. since im failry a new pilot, i use one on the tail as well, works great no complaints!

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 12, 2010

These servos are great for foamy's. If the nylon gears strip( which you must have hit the ground hard) then replace ment gears are here.

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 03, 2010

This is a good servo. I bought 10 of them but 1 worked out. O do not believe that the speed is at 0,12 sec. It's similar to HTX900 but not the same. Also, is a good servo at this cheap price!

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 01, 2010

High quality servo! Great for shockflyers and small foam planes!

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 21, 2010

well, I bought four of these babes, tg9 and four tg9e. The economical version worked pretty good, one of the four TG9 NEVER worked. I think it's part of the risk buying on the other side of the world. In the other hand they don't center very well but that's not problem. Please turnigy have a better control in your quality.

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 15, 2010

I bought 12 of these servos Used 5 , some noisy some move different than others so I had to match them. I bent the airplane and took the gears out of three. I tried to get 12 sets of gears from HK and they don't even know if they sell them. Does anyone know of gears that I might buy? My servos have two flights on them.

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Apr 27, 2010

Slow servo. Depending on what you are using it for might not be fast enough. Good value but slow

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Apr 07, 2010

These are not very good. teh HXT-900 is 100x better. these Turnigy TG9 do not center well at all and will make you plane fly poorly if used on surfaces - ailerons, elevator, rudder. they area also slow. I bought 4 and all 4 were the same. for the same price get the HXT900's.

One thing I like them for is retracts, as they are slower and you don't need a retract to center.

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Apr 01, 2010

Schner Servo, klein und arbeitet, dazu noch preiswert. Selbst nach Absturz arbeitet er noch ohne Probleme.

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!