New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy TGY-i6 AFHDS Zender en ontvanger 6CH (Mode 2)

Turnigy TGY-i6 AFHDS Zender en ontvanger 6CH (Mode 2)

Shipped From:
  • USA
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 49,53
status:
In voorraad
SKU:
9114000020-0
WANT FREE SHIPPING? Click here to find out more!

De Turnigy TGY-i6 is een geweldige instap 6-kanaals telemetrie 2,4 GHz computer zender die gebruik maakt van solide en betrouwbare Automatic Frequency Hopping Digital System (AFHDS) spread spectrum technologie. De Turnigy TGY-i6 heeft zowel een mooie kwaliteit look and feel, terwijl de programmering is eenvoudig te gebruiken. De TGY-i6 heeft ook een indrukwekkende lijst van functies en is voorzien van een TGY-iA6 6-kanaals receiver. Geschikt voor zowel model Heli en Airplane, de Turnigy TGY-i6 is een uitstekende budget computer radio voor zowel nieuwe piloten en ervaren piloten!

De ultra slanke behuizing ontwerp past ergonomisch je handen leidt tot minder vermoeidheid van de hand vooral tijdens lange vluchten. Digitale afwerking, backlit LCD-scherm, en eenvoudige programmering geven de TGY-i6 een moderne uitstraling met alle functies die u wilt. Met een laag profiel antenne, de TGY-i6 is gemakkelijk op te slaan en geen zorgen over het breken van het. Verstelbare lengte stokken, en een lus voor het bevestigen van een draagriem ronden de lijst comfort beschikt deze radio biedt. Voor het wijzigen van de vlucht modes of meerdere flapstand opties, de TGY-i6 heeft een 3-positie schakelaar, evenals twee instelbare knoppen.

Breid de mogelijkheden van uw modellen of weet precies wat er gaande is met de optionele telemetrie-ontvangers en verscheidenheid aan sensoren. Normaal gesproken zou hebben om honderden dollars besteden aan een zender met deze mogelijkheid krijgen. Niet zo met de beschikbaarheid van de TGY-i6.

Voor de prijs, de functies van de TGY-i6 aanbiedingen maken dit een van de beste radio's beschikbaar dollar voor dollar.

Kenmerken:
• Instap 6-kanaals 2,4 GHz met telemetrie vermogen
• Dual Rate / Versieringen / Gear / Flap / Gyro Gain Adjust / Flight Mode / Throttle Hold / Hover Pitch Switches
• Eenvoudig te programmeren en navigatieknoppen
• Ondersteunt Heli / Standard Wing / Elevon / V-Tail
• 20 Model Memory
• 8 Karakter Modelnaam
• Trainer en opladen havens
• Verlicht LCD-scherm toont real-time zender en ontvanger voltage
• 4 Stick Mode selecteerbare
• Optionele telemetrie-ontvangers en sensoren apart verkrijgbaar

Basic Programm Functies:
Dual tarieven
sub Trim
Travel Adjust
Channel Reverse
Swash Mix
Gyro Gevoeligheid
Throttle Curve
Monitor
Pitch Curve
Throttle Hold
Modelnaam
timer

Turnigy TGY-i6 Zender Specs:
Frequentie: 2,4 GHz ISM-frequentiebereik
Modulatie: GFSK
Spread Spectrum Mode: AFHDS 2A en AFHDS
Band: 142
Aantal Frequentie kanalen: 20
Output Power: <= 20 dBm
Werken Actueel: <= 100mA
Werken Voltage: 1.5vx 4 AA
Afmetingen: 174x89x190mm
Gewicht: 392g
Resolutie: 1024 bit
Stick Mode: Mode 2 (Throttle Links)

Turnigy iA6 Receiver Specs:
Kanaal: 6
Frequentie: 2.4G ISM frequentiebereik
Vermogen: 4.5V ~ 6.6V / <30mA
Netto Gewicht: 6,4 g
Afmetingen: 40.4x21.1x7.35mm

vereist:
4 x AA-type batterij voor Operation

* Opmerking: de ontvanger macht telemetrie feedback is beschikbaar via de standaard i6-ontvanger. Om telemetrie sensors gebruiken, zoals de RPM / Speed ​​(TGY-CPD01 magnetische of TGY-CPDO2 Optical) of Temperature (TGY - CTM01) moet u de TGY-IA10-ontvanger of de Turnigy TGY iA6B V2 volledige gamma receiver in staat te stellen alle vluchtgegevens telemetrische gegevens functies opgenomen in de accessoires hieronder lijst. Als u meer kanalen voor grotere vliegtuigen nodig hebt, de TGY-CEV01 u helpen bij het uitbreiden van het ene kanaal naar vier kanalen.

  • Sku 9114000020-0
  • Brand Turnigy
  • Capaciteit ( mAh ) -
  • Gewicht 880.0000
  • Lengte 230.00
  • Packaging Width 105.00
  • Hoogte 205.00
  • HOW TO CHANGE MODE 1 TO MODE 2 CONVERT!
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Hi,

I got Turnigy TGY-i6 to use it with Mini Skyhunter flying FPV.
I placed my onw GPS system inside model and I got range 350meters without any trouble.
I use 4 to 5 channels. I like to switch between swith and stick.
Setup is easy with nice servo curve.

Honestly for that price, it's a good choice.

Pierrick

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi,

I got Turnigy TGY-i6 to use it with Mini Skyhunter flying FPV.
I placed my onw GPS system inside model and I got range 350meters without any trouble.
I use 4 to 5 channels. I like to switch between swith and stick.
Setup is easy with nice servo curve.

Honestly for that price, it's a good choice.

Pierrick

Excelente transmisor por el precio. Alcance con el receptor que lleva el transmisor suficiente para aviones como bixler etc. lo perderas antes de vista que de la radio.
En el receptor se lee la tension de alimentación del Rx y del TX. Si quieres leer la general de la lipo que alimenta el avión, necesitas otro receptor (V2 ó 10canales) y el modulo lector tensión que se anuncia como complemetarios en anuncio transmisor.
Ademas lleva todo lo necesario para configurar (exponencial, reverse, hold motor ajuste recorrido servo y muchisimo mas.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelente transmisor por el precio. Alcance con el receptor que lleva el transmisor suficiente para aviones como bixler etc. lo perderas antes de vista que de la radio.
En el receptor se lee la tension de alimentación del Rx y del TX. Si quieres leer la general de la lipo que alimenta el avión, necesitas otro receptor (V2 ó 10canales) y el modulo lector tensión que se anuncia como complemetarios en anuncio transmisor.
Ademas lleva todo lo necesario para configurar (exponencial, reverse, hold motor ajuste recorrido servo y muchisimo mas.

The quality/price of this product is fine, the set up si easy and have a lot of functionality. The output of gas sticker i've seen thar sometimes is not precise in output segnal. The quality of material is good, but not optimal.
I not see the update in the hobbyking page.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The quality/price of this product is fine, the set up si easy and have a lot of functionality. The output of gas sticker i've seen thar sometimes is not precise in output segnal. The quality of material is good, but not optimal.
I not see the update in the hobbyking page.

great remote for beginners

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great remote for beginners

A very decent controller for the price, however the trainer port is not a standard pinout as far as I can tell. The connector is a 4 pin Mini DIN, Pin 1: PPM, Pin 2: 5v, Pin 3: TX, Pin 4: Rx.

Used this to control both a CC3d and a Librepilot Revolution.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A very decent controller for the price, however the trainer port is not a standard pinout as far as I can tell. The connector is a 4 pin Mini DIN, Pin 1: PPM, Pin 2: 5v, Pin 3: TX, Pin 4: Rx.

Used this to control both a CC3d and a Librepilot Revolution.

I'm brand new to TGY-i6 / FS-i6 and I have a problem to understand meaning of channel trim in view of D/R function. If I trim i.e. CH4 off the centre position than having the Stick in the middle and switching D/R the channel output bar on Function/Display jumps accordingly too. Why ?

Otherwise if I trim the plane in Normal mode, I will get completely different "neutral" servo positions just by switching TX to Sport mode with Sticks in the middle. According to me trimmed neutral servo position shouldn't be effected by D/R.

In my opinion the D/R should effect the Stick value ONLY not the trim. In mathematical way it should be something like ChOutput=Trim (Stick)*D/R instead ChOutput=(Trim Stick)*D/R as applied now.

This is a fatal error disallowing use D/R EXP function.

degrades transmitter FS-i6 in the category of toys ....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm brand new to TGY-i6 / FS-i6 and I have a problem to understand meaning of channel trim in view of D/R function. If I trim i.e. CH4 off the centre position than having the Stick in the middle and switching D/R the channel output bar on Function/Display jumps accordingly too. Why ?

Otherwise if I trim the plane in Normal mode, I will get completely different "neutral" servo positions just by switching TX to Sport mode with Sticks in the middle. According to me trimmed neutral servo position shouldn't be effected by D/R.

In my opinion the D/R should effect the Stick value ONLY not the trim. In mathematical way it should be something like ChOutput=Trim (Stick)*D/R instead ChOutput=(Trim Stick)*D/R as applied now.

This is a fatal error disallowing use D/R EXP function.

degrades transmitter FS-i6 in the category of toys ....

Real fast shhipping and delivered in good status. Really happy with it. Also the cheapest i could find.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Real fast shhipping and delivered in good status. Really happy with it. Also the cheapest i could find.

Having had one of these for over a year now and used it almost every weekend I must say it is very good value for money. It is being used on model boats. Currently I have five models set up in it, MTB (all 6 ch) Yacht, Hi speed cat racer, speed boat & cabin cruiser. The mix option is good if you have two motors in the boat as it can be associated with the rudder controls. My only complaint is the On-Off switch plays up and it has to be wiggled around to make it work. However I have just ordered another complete unit because it is such good value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Having had one of these for over a year now and used it almost every weekend I must say it is very good value for money. It is being used on model boats. Currently I have five models set up in it, MTB (all 6 ch) Yacht, Hi speed cat racer, speed boat & cabin cruiser. The mix option is good if you have two motors in the boat as it can be associated with the rudder controls. My only complaint is the On-Off switch plays up and it has to be wiggled around to make it work. However I have just ordered another complete unit because it is such good value.

Very good cannot fault. Hard to get hold of extra receivers though

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good cannot fault. Hard to get hold of extra receivers though

Simply a fantastic radio : bought it a year ago, and used it really a lot since my planes are in the air about 750 times a year , 14 planes linked to this radio, even elevon and v-tails .
Absolutely recommended for a good start in the hobby with many possibilities . Awesome product .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Simply a fantastic radio : bought it a year ago, and used it really a lot since my planes are in the air about 750 times a year , 14 planes linked to this radio, even elevon and v-tails .
Absolutely recommended for a good start in the hobby with many possibilities . Awesome product .

Customer files
FS update Download [134]
No File Name Download [6578]
Manual-i6 Download [6578]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save