New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy TrackStar One Cell 120A 1 / 12e en 1 / 10de schaal Sensored borstelloze Car ESC

Turnigy TrackStar One Cell 120A 1 / 12e en 1 / 10de schaal Sensored borstelloze Car ESC

Discontinued Product

Please continue searching for a similar product.
SKU:
TTS-120A-1S
WANT FREE SHIPPING? Click here to find out more!

Opraken verkoop was $ 59,99 nu slechts $ 39,99 alleen zolang de voorraad strekt!

De Turnigy TrackStar One Cell 1 / 12e en 1 / 10e schaal ESC is de nieuwste toevoeging aan Hobby Kings Sensored Car ESC bereik.

De TrackStar One Cell beschikt over een ingebouwde spanning booster voor enkele cel LiPoly gebruik in 1 / 12e en 1 / 10de schaal racen. Een extra heatsink en ventilator opgenomen voor 2S 1 / 10de ras toepassingen waardoor de TrackStar One Cell een echt veelzijdig ESC.

Met behulp van een Fast Silicon Labs MCU en hoge kwaliteit On-Semiconductor MOSFET de TrackStar One Cell 120A ESC zet een nieuwe standaard in hoge kwaliteit en toch betaalbare auto SER. Met Intelligent MCU logica van de TrackStar serie SER toe uiterst nauwkeurige opstarten controle en positionering feedback van de motor. Dit vertaalt zich in een zeer vlotte start en acceleratie.

Timing Indicator LED.
Om te voldoen aan ROAR's Sportsman Class racing regels en helpen ras organisatoren controleren bestuurder naleving in niet-timing gemodificeerde raceklassen de TrackStar 1 / 10de ESC is voorzien van een timing-indicator LED. Te allen tijde bij de ESC is ingeschakeld en dynamische motor timing is ingesteld op een waarde groter dan nul de witte LED branden die aangeeft dat de timing mode is gewijzigd.

De Turnigy TrackStar One Cell 120A ESC beschikt ook over een groot aantal opties programmeren meestal niet gevonden in een ESC op deze prijs en kan gemakkelijk worden geprogrammeerd via de Turnigy TrackStar programmering kaart (afzonderlijk verkrijgbaar).

Specificatie:
Cont. Current: 120A
Burst Current: 200A
Motor Omwenteling: Fwd / Rev of Fwd / Brk
Input Vermogen (cellen): 1-2s LiPo / LiFe, 3-6 NiMH (8.4V Max)
Motor Type: Sensored en sensorloze borstelloze motoren.
BEC Output: 6.0V, 1A, Built-in BEC met DC booster voor 1 cel LiPo gebruik.
Status LED (2 LED's): White LED, 3 kleuren LED (rood, groen en oranje)
Bescherming thermische overbelasting: Ja
Afmetingen (L * B * H / zonder ventilator): 36.5 * 42 * 18mm (1,44 * 1,65 * 0.71in)
Gewicht (zonder draden): 34g (1.20oz)

motor Grenzen
1S LiPo of 3-4S NiMH): ≥3.5T (12/1 on road)
2S LiPo of 5-6S NiMH): ≥4.5T (1/10 on-road) ≥6.5T (1/10 off-road) *

Programmeren opties (via optionele programmering kaart of Throttle-ingang)
Rem / achteruit soort
rem bedrag
Reverse bedrag
Punch Controle
drag Brake
Throttle Dead Band
Voltage Snijd
motor Timing

Let op: * 2S LiPoly gebruik vereist de installatie van de bijgeleverde koelelement en de ventilator.

  • Sku TTS-120A-1S
  • Brand TrackStar
  • Capaciteit ( mAh ) -
  • Gewicht 180.0000
  • Lengte 0.00
  • Packaging Width 0.00
  • Hoogte 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I hope they keep licensing these from Toro/skyrc as they are solid units for blink needs. Granted it looks like the Gen II is taking this over. Easy to program and very easy to use.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I hope they keep licensing these from Toro/skyrc as they are solid units for blink needs. Granted it looks like the Gen II is taking this over. Easy to program and very easy to use.

Just received two of these ESCs in the mail today. Absolutely thrilled with the build quality HK! After calibrating per instructions, tweaking with the programming card, installed pinion gear and took a few laps around the living room. Combined with the 8.5T Turnigy TrackStar...pulling wheelies with my Associated SC10. Racing tomorrow so durability test to come. Cant go wrong with this ESC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received two of these ESCs in the mail today. Absolutely thrilled with the build quality HK! After calibrating per instructions, tweaking with the programming card, installed pinion gear and took a few laps around the living room. Combined with the 8.5T Turnigy TrackStar...pulling wheelies with my Associated SC10. Racing tomorrow so durability test to come. Cant go wrong with this ESC.

I am running this in a Team Associated RC10L3 Pan Car
5.5T 6000KV HL540-3650 3G2P Sensored
ZIPPY Flightmax 4000mAh 2S1P 25C Car Lipoly (ROAR APPROVED) (USA Warehouse)
Robinson Racing Associated RC-10L SS Super Machined Spur 64p 78t
Robinson Racing Associated RC-10L SS Alum. Pro Pinion 64p 50t

I am getting speeds in excess of 50mph on the asphalt (I'm sure I can get allot faster)
Using the default settings the Motor and esc stay very cool and I am getting 20-25 minute run times (not on a track, just up and down my street)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am running this in a Team Associated RC10L3 Pan Car
5.5T 6000KV HL540-3650 3G2P Sensored
ZIPPY Flightmax 4000mAh 2S1P 25C Car Lipoly (ROAR APPROVED) (USA Warehouse)
Robinson Racing Associated RC-10L SS Super Machined Spur 64p 78t
Robinson Racing Associated RC-10L SS Alum. Pro Pinion 64p 50t

I am getting speeds in excess of 50mph on the asphalt (I'm sure I can get allot faster)
Using the default settings the Motor and esc stay very cool and I am getting 20-25 minute run times (not on a track, just up and down my street)

ESC supports sensor and sensorless motors, but this ESC brings significant "cogging" if it is used with sensorless motors. The cogging effect is much higher as it is typical for sensorless motors and some trimming cheats are necessary!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ESC supports sensor and sensorless motors, but this ESC brings significant "cogging" if it is used with sensorless motors. The cogging effect is much higher as it is typical for sensorless motors and some trimming cheats are necessary!

so far works great,the only thing i woud sugest it that the wires all be 12gauge for running pan car or 1/12. easy programing with card!! will need to get another for my stock.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

so far works great,the only thing i woud sugest it that the wires all be 12gauge for running pan car or 1/12. easy programing with card!! will need to get another for my stock.

I fitted this to my 1/10 turnigy sct with a trickster 4.5 turn motor and a 24 tooth drive gear and it flies! Total out of control power and more top end than the little car can handle. U should see the tires grow as u put the power down. Mental! I also waterproofed mine in plastidip to keep it safe. Love it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I fitted this to my 1/10 turnigy sct with a trickster 4.5 turn motor and a 24 tooth drive gear and it flies! Total out of control power and more top end than the little car can handle. U should see the tires grow as u put the power down. Mental! I also waterproofed mine in plastidip to keep it safe. Love it!

Top Flight ESC for 1/4 the money!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Top Flight ESC for 1/4 the money!

great esc for the money run it in my mardave and then use same esc in my 1/10 buggy get 2 esc for the price of one

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great esc for the money run it in my mardave and then use same esc in my 1/10 buggy get 2 esc for the price of one

works great in my mardave on 1s lipo no prob

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works great in my mardave on 1s lipo no prob

The ESC works great with every motor down to 3,5 Turns. Other ESC couldnt handle this motor. Bad thing is that the ESC plug doesnt deliver the 6V DC!! Solution is to plug the programming cable into the aux port of the receiver.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The ESC works great with every motor down to 3,5 Turns. Other ESC couldnt handle this motor. Bad thing is that the ESC plug doesnt deliver the 6V DC!! Solution is to plug the programming cable into the aux port of the receiver.

  1. 1
  2. 2
Customer files
One Cell Manual Download [689]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!