Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy TrackStar Waterproof 1/10 Brushless Power System 4000KV / 80A

Generating Links

Turnigy TrackStar Waterproof 1/10 Brushless Power System 4000KV / 80A

Prijs:

Now save bespaar € 0,00 € 0,00

€ 68,28
Toestand:
Uit voorraad!
SKU:
9192000061
Geen verzendkosten? Klik hier meer leren!

Een zeer krachtige borstelloze systeem voor 1/10 of 1/12 schaal vrachtwagen, auto of buggy. De Turnigy TrackStar Waterproof-serie biedt topprestaties, uitstekende waarde en waterdicht componenten in een gemakkelijk te combo pakket. Met dit systeem, de motor en ESC zijn op elkaar afgestemd voor de beste prestaties, die de moeite van het kiezen van afzonderlijke componenten zelf bespaart u. Gewoon soldeer op uw favoriete connectors, installeert u een rondsel en ben je klaar om te draaien!

Omdat het waterdicht, dit systeem kunt u uw model lopen in zowat alle weersomstandigheden zoals regen en sneeuw! Dit opent een hele nieuwe wereld van mogelijkheden voor uw favoriete R / C vrachtwagen, auto of buggy.

Kenmerken:
ESC
• Verbeterde gasrespons, nauwkeurig gas lineariteit, een uitstekende acceleratie en krachtig remmen
• Waterdicht voor nat weer lopen
• Programmeerbare met de Turnigy TrackStar Turbo en waterdicht Programming (los verkrijgbaar)
• detecteert automatisch het aantal cellen in de accu.
• Meerdere beveiligingsfuncties: Laag voltage bescherming cut-off, over-bescherming tegen hitte, gas signaalverlies bescherming en de motor geblokkeerd bescherming.
Motor
• Waterdicht voor nat weer lopen
• Hoge kwaliteit geanodiseerde afwerking CNC
• Zuiver koperen wikkelingen
• Krachtige gesinterde neodymium magneet
• Hoge bediening efficiëntie

ESC Specs:
Continu Stroom: 80A
Burst Current: 95A
Resistance: 0.0009ohm
Batterij: 2 cellen Lipo (5-6 cellen NI-xx)
BEC uitgang: 6V / 1A
Motor type: sensorloze borstelloze motoren
Running mode: Aanvaller alleen of doorsturen met reverse (programmeerbare modus)
Afmetingen: 43 x 38 x 20mm
Gewicht: 88g

Motor Specs:
Model: 3650 Sensorloze
Kv: 4000
Aantal polen: 2
Cont Current: 45A
Peak Current: 55A
Max Power (15sec): 370W
Winding: 16T
Resistance: 0.0125ohm
Gewicht: 180g
Diameter: 36mm
Lengte: 53mm
Shaft Diameter: 3.175mm

inclusief:
80A Sensorloze Brushless ESC
3650 16T (4000Kv) borstelloze motor

  • Kv ( tpm / v ) 4000.00
  • Max Currents (A ) 55.00
  • Resistance ( mh ) 12.50
  • Max Voltage ( V ) 8.00
  • Vermogen ( W) 370.00
  • Shaft A ( mm ) 3.17
  • Lengte B ( mm ) 54.00
  • Can Diameter C ( mm ) 36.00
  • Kan Lengte D ( mm ) 50.00
  • Totale lengte E ( mm ) 67.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Jk | Geverifieerde koper

  • Overall
  • Quality
  • Value

Still not to sure...

Feb 05, 2022

So I really really want to love this, that being said.. the ESC is incredibly difficult to configure to your remote. Had to use flysky 3 channel reciever and use input 2(input 1 is for the steering servo) to get it to finally read, then for my remote nothing worked like everyone said it should, only a solid orange light, pressing the little set button did nothing.. but I finally figured out you just have to press the trigger and it flashed indicating it set reverse, the neutral, and forward. It worked. Then got all that working, the motor and esc all setup out of the vehicle, tested it, seemed good. Put it all into my deerc 9200 platform, a 1/12 scale really, and its cogging really bad at start. Double checked i had no weird sudden binds in the drive train. Took it all out, tested it out again and checked for binding in the drive train. Put it all back, and still cogging real bad at start. Once it gets going a little this thing FLIES! Very awesome speed demon 4x4, honestly almost to fast. I am going to try and reset my remote to the esc and see if that gives me any solutions..

Paul | Geverifieerde koper

  • Overall
  • Quality
  • Value

Very good run very smoth

Feb 03, 2022

They run very smooth and quite

ALEX | Geverifieerde koper

  • Overall
  • Quality
  • Value

Happy customer

Jun 17, 2020

I run this on my Tamiya Blitzer beetle. I've never programmed it and its set up nice from the box. I use a 2s lipo battery and it really flies. Maybe too fast for the chassis but so much fun.

Lyndsay | Geverifieerde koper

  • Overall
  • Quality
  • Value

Only for the experience

Apr 30, 2020

Had to file down plug to fit programming box which is needed to get the motor to run nice. you need battery plugs which are not supplied.

Baschdelhorst | Geverifieerde koper

  • Overall
  • Quality
  • Value

Super Geil!

Dec 30, 2019

Tolle Kombo, eingebaut in XRay T4 2018. Perfekter Sitz, einbauen, einschalten, funktioniert ! Sehr zu empfehlen

Ivo | Geverifieerde koper

  • Overall
  • Quality
  • Value

Bad quality! Do not buy this!

Oct 16, 2019

It's almost impossible to calibrate the esc. We are 4 people who bought this and all of us have problems with esc.

Michael | Geverifieerde koper

  • Overall
  • Quality
  • Value

Trash trash trash

Sep 25, 2019

Complete trash was sent 2 systems and neither esc worked.... Now I'm stuck paying to ship this crap and back and wasted time just to get store credit to buy some more junk. Make it make sense

Darren | Geverifieerde koper

  • Overall
  • Quality
  • Value

Excellent Bang For the Buck

Jul 07, 2019

Great combo! Replaced the stock brushed system in my Arrma Senton with this. Very simple install, pretty much plug and play. Only issue I have, and the reason for only 4 crowns on quality is: 1) zero documentation comes with this. I had to spend time on you tube and google to figure out that 2) without the programming card (which ALSO does not have instructions) you’re pretty limited on the stock performance as programmed.
I tweaked the programming with the programming card and this combo just took right off. I would like to see a description of each parameter in the programming as mine didn’t have the same options as any I watched on you tube.
Great Product!

Andy | Geverifieerde koper

  • Overall
  • Quality
  • Value

Works great

Jun 04, 2019

Put this getup in my son's 1/10 AMP DB 2WD Desert Buggy Brushed RTR, Black/Yellow (ECX03029T1). The thing tears it up now, but am a little worried about the driveshaft universal joints. They have a history of failing in this car and I may have just decreased the projected lifespan.

stewart | Geverifieerde koper

  • Overall
  • Quality
  • Value

Loads of power, Well worth getting

Jun 02, 2018

Got this combo in my Tamiya M07 as we race all year round out side,turned the speedo down by 40% otherwise it burns the tyres up. Been running it for 10 months or more and cant fault it great value for money. I have the other combos running in my 4wd Vandal Buggy 2cell (5200 combo) and Trooper Short Course truck 3cell (3250) and all are great fun waterproof fast and reliable.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Klantbestanden
No File Name Download [3675]
Throttel_Range Download [1]
think this is it. Download [1262]
ESC Calibration v2.0 Download [169]
ESC Calibration Download [26]
No File Name Download [3435]
Manual ESC Download [33]
Procédure de calibrage et Notice - ESC Tracskar 80A Download [13]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

Accessoires