New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy TY-P1 25Amp HEXFET Brushless Speed ​​Controller

Turnigy TY-P1 25Amp HEXFET Brushless Speed ​​Controller

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
TYP1-25A
WANT FREE SHIPPING? Click here to find out more!

De Turnigy TY-P1 25Amp ESC is een opvallen performer. Met behulp van kwaliteit IR HEXFET® Vermogen MOSFET's ontwikkeld in de Verenigde Staten, dit ESC is de kabel van de behandeling van stroomverbruik van meer dan 40 ampère. Maar dit in eigen huis ontworpen ESC is ontwikkeld en geproduceerd door de HobbyKing engineering team met een doel voor ogen, kwaliteit en betrouwbaarheid. In plaats van op tarief van de ESC en duw het aan de grens met een grotere warmte-sink, zoals veel bedrijven doen, wilden we een Speed ​​controller voor mensen op zoek naar een kogelvrij oplossing te ontwerpen. We maken gebruik van SMT-technologie in plaats van de hand solderen aan consistente kwaliteit en betrouwbaarheid elke keer produceren. De TY-P1 25A ESC beschikt ook over onafhankelijke spanningsregelaars (Een voor de BEC en één voor de MCU) dit zorgt ervoor dat de MCU zal aangedreven blijven in het geval van een hoge kortstondige amp draw uit de BEC circuit en vise versa. Een XT-60 batterij connector en 3,5 mm kogel connectors zijn pre-gesoldeerd voor het gemak.

specs:
Cont. Current: 25A
Burst Current: 50A
BEC: 5volts / 2amps
Gewicht: 42,5 Gram (met inbegrip van kabels en stekkers)
Batterij Plug: XT-60
Motor Plug: 3,5 mm Bullet Connector

Programming Opties:
Rem (OFF / ON).
Cut-off type (Soft-cut / cut-off).
Cut-off Voltage (Laag / Midden / Hoog).
Start Mode (Normaal / Soft / Zeer zacht).
Timing Mode (Laag / Midden / Hoog).
Cell (Auto, 2S, 3S, 4S).

Opmerking: De programmering kan worden gedaan via de optionele programmering kaart. Zie gerelateerde items hieronder.

Dit ESC vereist dat de gebruiker het gas bereik in te stellen op de installatie. Download de handleiding voor verdere instructies.

HEXFET® is een geregistreerd handelsmerk van International Rectifier Group California, USA.

  • Sku TYP1-25A
  • Brand Turnigy TY-P1
  • Capaciteit ( mAh ) -
  • Gewicht 70.0000
  • Lengte 120.00
  • Breedte 10.00
  • Hoogte 100.00
  • Turnigy TY-P1 25Amp HEXFET Brushless Speed Controller
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

love these ESC great for bigger planes like the Flite Test Guinea Pig

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

love these ESC great for bigger planes like the Flite Test Guinea Pig

come da descrizione all'atto dellla vendita, molto soddisfatto

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

come da descrizione all'atto dellla vendita, molto soddisfatto

Very good esc , easy card programming for multirotor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good esc , easy card programming for multirotor

This is very good for my Quad

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is very good for my Quad

Great works perfectly with my ft Guinea pig and just like vid says this wax is meant to be 40 amp

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great works perfectly with my ft Guinea pig and just like vid says this wax is meant to be 40 amp

Tought it was broken, but is didn't calibrate it... normally you don't have to wait so long to calibrate it but its ok. Actually these are pretty nice

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tought it was broken, but is didn't calibrate it... normally you don't have to wait so long to calibrate it but its ok. Actually these are pretty nice

I actually have 17 of these in various multirotor aircraft that have worked perfectly for years now. They are reflashed with SimonK firmware. These were bought some time ago. I bought one recently that did burn out when setting up a FPV plane, I think it was a bad solder joint either on the esc or on one of the extensions I was using because the motor kicked back and forth when trying to power up and that's a sure sign of a bad connection.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I actually have 17 of these in various multirotor aircraft that have worked perfectly for years now. They are reflashed with SimonK firmware. These were bought some time ago. I bought one recently that did burn out when setting up a FPV plane, I think it was a bad solder joint either on the esc or on one of the extensions I was using because the motor kicked back and forth when trying to power up and that's a sure sign of a bad connection.

The moment I plugged this in it blew up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The moment I plugged this in it blew up.

I can't recommend this product to anyone. Please avoid this product.

I had some test flights (5mins?) with my new quadcopter and these ESCs yesterday. After some KK2.1 parameter tuning today, I went to field to test new configuration. Right after plugging in the battery (Turnigy 2200mAh, 3S), I noticed some propeller movement, spark sounds from the esc AND SMOKE FROM THE ESC! Esc warmed a bit and is for sure broken.

Please note: the esc burned right after plugging in the battery. No throttle, no overload.

Now I am considering whether I should replace all my ESCs because if one burns like this, others may also. Next one might burn the flight controller and/or motors, if this one already didn't...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I can't recommend this product to anyone. Please avoid this product.

I had some test flights (5mins?) with my new quadcopter and these ESCs yesterday. After some KK2.1 parameter tuning today, I went to field to test new configuration. Right after plugging in the battery (Turnigy 2200mAh, 3S), I noticed some propeller movement, spark sounds from the esc AND SMOKE FROM THE ESC! Esc warmed a bit and is for sure broken.

Please note: the esc burned right after plugging in the battery. No throttle, no overload.

Now I am considering whether I should replace all my ESCs because if one burns like this, others may also. Next one might burn the flight controller and/or motors, if this one already didn't...

Bought 4 of these since they were suggested by HK for my quad project. I would not suggest getting these to use with the Multiwii board. After many, many hours of work 1 works all the time, 1 works sometimes, and 2 just beep. They all work fine connected directly to a Spektrum receiver. I don't think they communicate well with the multiwii.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 4 of these since they were suggested by HK for my quad project. I would not suggest getting these to use with the Multiwii board. After many, many hours of work 1 works all the time, 1 works sometimes, and 2 just beep. They all work fine connected directly to a Spektrum receiver. I don't think they communicate well with the multiwii.

Customer files
Manual Download [89]
Back TY-P1 Macro Download [304]
Capacitors Download [2630]
Capacitors Download [3339]
pin-out-better Download [140]
melted ground wire Download [121]
3 of 6 burn out of the box Download [1074]
3 of 6 burn out of the box Download [885]
Manual Download [93]
pin-board to flash without soldering Download [2659]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save