New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy Typhoon 600H Heli Motor 1100kv (600-klasse)

Turnigy Typhoon 600H Heli Motor 1100kv (600-klasse)

Shipped From:
  • USA
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
TY600H-1100
WANT FREE SHIPPING? Click here to find out more!
De Turnigy Typhoon is een zeer ernstige upgrade voor elke 600 formaat heli. Grote, strakke koperdraad wordt met dunne, dicht opeengepakte lamellen en een kleine stator / magneet luchtspleet maken deze motor zeer efficiënt en krachtig.
Gebruikers zullen de directe macht te vergroten en een hoger stationair toerental merken bij het gebruik van deze motor en we raden u aan uw gaspedaal aan te passen.

specificaties:
Afmetingen: 42mm x 62mm, 85mm (met as)
Gewicht: 269g
Kv: 1100rpm / V
Voltage: 3 ~ 6S
Max stroom: 60A
Diameter van de schacht: 5mm
Lengte van de voorste as: 23mm
ESC: 80A

De Typhoon 600 Afmetingen helikopter motor is een serieuze upgrade voor elke 600 formaat heli.
  • Sku TY600H-1100
  • Brand Typhoon
  • Gewicht 299.0000
  • Lengte 0.00
  • Packaging Width 0.00
  • Hoogte 0.00
  • Kv ( tpm / v ) 1100.00
  • Max Currents (A ) 60.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 22.00
  • Vermogen ( W) 0.00
  • Shaft A ( mm ) 5.00
  • Lengte B ( mm ) 62.00
  • C Diameter ( mm ) 42.00
  • Kan Lengte D ( mm ) 40.00
  • Totale lengte E ( mm ) 85.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I run this with a YEP100A with timing @ zero degrees and 8khz PWM, governor off, on a HK550 frame, 520mm blades with 11.4 pitch and it's fantastic for a good 6-7 mins of sports flying. Nice efficient motor, but the 15t 0.7M for 5mm shaft was a little hard to find - eventually found it on ebay. I have the little brothers for the 500 and 450 size helis which are sufficient power for those size... I know this one won't give me the power for hard 3D but I'm not there yet. Motor comes down luke warm and doesn't make the ESC break a sweat. If you need an efficient motor for 550/600 size this is probably it on those available here.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I run this with a YEP100A with timing @ zero degrees and 8khz PWM, governor off, on a HK550 frame, 520mm blades with 11.4 pitch and it's fantastic for a good 6-7 mins of sports flying. Nice efficient motor, but the 15t 0.7M for 5mm shaft was a little hard to find - eventually found it on ebay. I have the little brothers for the 500 and 450 size helis which are sufficient power for those size... I know this one won't give me the power for hard 3D but I'm not there yet. Motor comes down luke warm and doesn't make the ESC break a sweat. If you need an efficient motor for 550/600 size this is probably it on those available here.

Gewicht 278g inkl 8cm Kabel,

Gehaeuse mit Luefter 42,8mm Durchmesser 62,2mm lang plus 11,5mm Welle mit 5mm Durchmesser,

Luefterschacht 8,5mm breit

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gewicht 278g inkl 8cm Kabel,

Gehaeuse mit Luefter 42,8mm Durchmesser 62,2mm lang plus 11,5mm Welle mit 5mm Durchmesser,

Luefterschacht 8,5mm breit

Used with turnigy 85amp esc. Works well with a lot of use. Direct fit into hk600 . Hk should supply the bolts to suit with their motors. Nothing worse than taking delivery of item and comming up 1 bolt short.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used with turnigy 85amp esc. Works well with a lot of use. Direct fit into hk600 . Hk should supply the bolts to suit with their motors. Nothing worse than taking delivery of item and comming up 1 bolt short.

Unfortunately for me, the engine worked good for 2 filghts. at the 3rd flights it shut down suddenly. of course the heli crashed. I opened the motor and one of the 3 connections disconnected. Maybe it's just my bad luck, but I lost a lot of parts and money!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Unfortunately for me, the engine worked good for 2 filghts. at the 3rd flights it shut down suddenly. of course the heli crashed. I opened the motor and one of the 3 connections disconnected. Maybe it's just my bad luck, but I lost a lot of parts and money!!!

Great engine for the HK600GT. Its getting just a little bit warm when flying. Enough power for sport flying. Fits perfect into the HK600 chassis.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great engine for the HK600GT. Its getting just a little bit warm when flying. Enough power for sport flying. Fits perfect into the HK600 chassis.

A super motor. I have been using it in my Gaui 550 for more than 12 months and over 500 flights and it is like new. Runs cool with plenty of power and super smooth and quiet. Flights over 8 minutes with a 6S 3300 Mah Batt. Highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A super motor. I have been using it in my Gaui 550 for more than 12 months and over 500 flights and it is like new. Runs cool with plenty of power and super smooth and quiet. Flights over 8 minutes with a 6S 3300 Mah Batt. Highly recommended.

I use Turnigy Typhoon 450 and now i will use this 600H motor in HK600GT.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use Turnigy Typhoon 450 and now i will use this 600H motor in HK600GT.

Maybe I was just out of luck, but after about 5 flights one magnet came lose. F***ed up the motor completely inside, but managed to autorotate with no damage to the heli.

Despite this, I will try another one of these, since average rating is good. When the motor worked I was happy with it... just enough power for easy flying such as loops and rolls, no hard 3D.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Maybe I was just out of luck, but after about 5 flights one magnet came lose. F***ed up the motor completely inside, but managed to autorotate with no damage to the heli.

Despite this, I will try another one of these, since average rating is good. When the motor worked I was happy with it... just enough power for easy flying such as loops and rolls, no hard 3D.

Ein guter Allroundmotor zum Spafliegen, Acro und im Verhltnis ausreichend Leistung fr den Durchschnittspiloten am 600er Heli

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ein guter Allroundmotor zum Spafliegen, Acro und im Verhltnis ausreichend Leistung fr den Durchschnittspiloten am 600er Heli

got this motor hopeing it would be like the typhoon 500 heli motor.. it doesent have the power for 3d in my 600 like the 500 motor does. great motor for learning colective pitch control when you do piros and large loops it handles smooth and holds a low headspeed for people that prefer light 3d and sport flying unlike me. not really happy with it overall

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

got this motor hopeing it would be like the typhoon 500 heli motor.. it doesent have the power for 3d in my 600 like the 500 motor does. great motor for learning colective pitch control when you do piros and large loops it handles smooth and holds a low headspeed for people that prefer light 3d and sport flying unlike me. not really happy with it overall

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Customer files
Raptor 50 electro Download [346]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!