Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

Turnigy XK2845-3650KV borstelloze Inrunner

Turnigy XK2845-3650KV borstelloze Inrunner

QTY:

Now save bewaar € 0,00 € 0,00

€ 19,00
Stock:
Gewicht:
157 g
SKU:
9393000031-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

Turnigy XK motoren zijn zonder twijfel een van de beste motoren op de markt vandaag. Het begint allemaal in onze eigen fabriek waar we precisie lagers, correct gewaardeerd magneten, evenwichtige rotoren, gereedschap stalen assen en stators die zijn gewikkeld met de hand te installeren. We grondig testen ieder onderdeel op 14 kritieke punten tijdens de bouw, het testen van alles van materialen helemaal door tot de uiteindelijke prestatietests.

Omdat wij ontwerpen en deze motoren te bouwen volledig in eigen huis controleren we de productie en zorgen product consistentie van ontwerp tot en met de scheepvaart. We haalden het midden-man om u fabrieksprijzen brengen terwijl niet concessies aan de kwaliteit of de prestaties.

Kenmerken:
• Hand-wond voor maximale koper vulling.
• Precisie evenwicht rotor impuls zal geven van de efficiëntie en macht de prestaties van de motor.
• Vernikkelde gesinterde neodymium rotor voor een maximale acceleratie van de motor, remmen kracht en prestaties in hoge temperaturen.

spec .:
Grootte: XK2845-3650KV
Polen: 4
KV: 3650
Max stroom: 48A
Max Voltage: 16.8V / 4S Lipo
Kast lengte: 46.5mm
Zaak Dia: 28mm
Shaft Dia: 3.175mm
Totale lengte: 60.5mm
Gewicht: 125g

Product
Specifications

Aanvullende Informatie

  • Sku:
    9393000031-0
  • Brand:
    Turnigy
  • Gewicht ( g)
    157.00
  • Lengte
    75.00
  • Breedte:
    35.00
  • Hoogte:
    60.00
  • Kv ( tpm / v )
    3650.00
  • Max Currents (A )
    45.00
  • Vermogen ( W):
    810.00
  • Lengte B ( mm ):
    47.00
  • Kan Lengte D ( mm )
    45.00
  • Max Voltage ( V )
    18.00
  • Shaft A ( mm ):
    3.18
  • Unit Weight (g):
    125
  • C Diameter ( mm )
    28.00
  • Totale lengte E ( mm )
    61.00
  • Resistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Reasonable price & good motor combine with HK esc 70a 435 prop 4s 5000mah 40c, My F1 rocket power faster than tenshock F1!! Even Hydrotek F1 combine with HK esc 50a 2200mah 40c prop 435 faster than stock motor.. you will be satisfied!! recommended item!!!
Quality
Value
Overall
Quality
Value
Overall
Over a year with this motor, still going strong. Mighty powerful motor in my proboat impulse 27 deep vee. Running a good 60a marine esc along with a water cooling jacket. Everything runs cool on 2s-4s, no thermal cutoffs yet. It is insanity on 4s and pushes my boat hardware to the limit : ) I am not a fan of the sharp edges at the top of the can, they like to slice the orings on cooling jackets in stock form.
Quality
Value
Overall
Quality
Value
Overall
Running with overcurrent on speed ac. But only a few secons full power each run. 4S Bolt battery and 4,75x4,75 is some over 35.000RPM,. Perfect, but due to currents of around 80 Amps only a few seconds power and then cool down again. Will surely not last long under this condition. But quality is really good. If you run it in specs it will perform long and reliable.
Quality
Value
Overall
Quality
Value
Overall
Just received and "dry ran" the motor. Even without no load the moter gets quite hot after few seconds and after 40 seconds I stoped as it got to hot to hold in hand. Infrared measurment showed 70 C on the outer case. Obvious notable vibrations might also kill the bearings within a short period of time.
Setup 4S drawing appox. 2,5 A no load current meaning approx 42 Watts.
No load testing done so far but i wonder if this makes sense with a motor boils even without load. Not convinced of the value of the motor so far.
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.