Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy ™ TGY-1270HV kogellager DS / MG Servo w / Heat Sink 40kg / 0.18sec / 170g

Generating Links

Turnigy ™ TGY-1270HV kogellager DS / MG Servo w / Heat Sink 40kg / 0.18sec / 170g

Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
068000001
Geen verzendkosten? Klik hier meer leren!

specificaties:
Operating Voltage: 6V ~ 7.2v
Gewicht: 170 g
Afmetingen: 59,5 x 29,5 x 54,3 mm
Torque @ 6.0V: 35 kg / cm
Torque @ 7.2V: 40 kg / cm
Snelheid @ 6.0V: 0.20 sec / 60 ° onbelast
Snelheid @ 7.2V: 0.18 sec / 60 ° onbelast
Toestel: Metal gear / Dual kogellager

  • Servo Torque ( kg) ( min . 0,01 kg ) 40.00
  • Servo Snelheid ( Sec / 60deg ) 0.18
  • Servo A ( mm ) 61.00
  • Servo B ( mm ) 59.00
  • Servo C ( mm ) 55.00
  • Servo D ( mm ) 30.00
  • Servo E ( mm ) 75.00
  • Servo F ( mm ) 40.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

CerBeRusVI | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jan 18, 2016

I purchased two of these for my Losi 5ive 5th scale Rc steering servo and neither one of them lasted more than a tank and a half of use. 1st one went at almost 2 tanks, took the servo apart and the main board had cooked itself, FET's had blown off the upperside of the board and partially melted the case. 2nd one brand new from package to truck lasted half a tank of fuel before it just stopped working. Havent taken it out yet, but it smells burnt just like the 1st one. FYI these where break in tanks! All on flat ground, mild throttle, no jumping, awkward landings, bashing abuse, BREAK IN running. Never will i buy these trying to save a $, should have put the initial money towards a name brand servo.

Thomas | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jul 12, 2015

Was das fr ein Mist , bin Direkt mit 2S Lipo drangegangen , nach einer Minute war das Teil Tod . berspannung vom Lipo wahrscheinlich. ?
Sind die nicht in der Lage diese Servos mit einer hheren Spannung abzusichern. .?
Jeder weiss doch das die Lipos nach dem Laden mehr als 8.2V haben .

Christian | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Apr 09, 2015

Solid and cheap servo. I have them in the losi 5ive (single) and baja 5t working well. Power them Rx battery LiFePo4 , and is pretty fast. I have to try 2s lipo. I had to buy Aluminum Steering Servo Horn 17T Arm on ebay because the plastic in 1/5 is too weak

Christian | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Apr 09, 2015

Solid and cheap servo. I have them in the losi 5ive (single) and baja 5t working well. Power them Rx battery LiFePo4 , and is pretty fast. I have to try 2s lipo. I had to buy Aluminum Steering Servo Horn 17T Arm on ebay because the plastic in 1/5 is too weak

Michael | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Sep 30, 2014

Used this as a replacement steering servo for my RedCat XSC. Tons stronger, high voltage so can handle a 5 cell pack fully charged with no BEC. No issues, especially for the cost!!

MrMous | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

May 15, 2014

great servo, using in one of my 1/5 scale and it has lasted through 3 motors

Aitor | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

May 14, 2014

He puesto este servo a 6V en la direccin de un baja 1/6 y la mueve perfectamente, incluso le he bajado la velocidad porque lo haca demasiado nervioso. El consumo no es excesivo y las bateras aguantan bien.

El precio es muy bueno y trae todos los accesorios necesarios para montarlo en cualquier coche. En la calidad no le pongo el mximo porque solo he gastado 4 depositos con este servo y no puedo decir nada de su durabilidad, pero de momento sin problemas ni bajadas de rendimiento.

Totalmente recomendable para la direccin de cualquier coche gran escala.

Janis K. | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jul 04, 2013

Using it almost one year now on baja 5b steering. Strongest servo i had. Winner in Latvia RcOffroad 2012 1/5 2WD championship. Survived for now almost 20 half hour track races.

CMANERO | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 26, 2013

Excelente Servo, muy preciso y buena velocidad. consume 800mha normalmente.

c131frdave | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Feb 25, 2013

Just got mine in the mail. First, they are bigger than I expected. I put them on my arduino test board for testing. Unfortunately, my regulator is stuck on 5VDC, so I couldn't really test the servo very well. But even at 5V, it is very strong. Once I get the 6V and 7.2V settings squared away, I'll amend this review.

First impressions are very good. Servo came in a very nice tin. It appears to be a high quality piece.

  1. 1
  2. 2
Klantbestanden
No File Name Download [3242]
tgy-1270hv.png Download [32]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!