Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

Turnigy ™ TGY-306g-HV Ultra Fast / High Torque DS / MG / HV Alloy Case 3,7 kg / 0.05sec / 21g

Turnigy ™ TGY-306g-HV Ultra Fast / High Torque DS / MG / HV Alloy Case 3,7 kg...

QTY:

Now save bewaar € 0,00 € 0,00

€ 20,86
Stock:
Gewicht:
33 g
SKU:
9355000003

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

TGY-306g-HV High Voltage Ultra Fast / High Torque MG Digital Alloy Cased Servo 3.7kg / 0.05sec / 21g - Excellent 450 Heli & 3D servo.

Model: TGY-306g-HV
Operating Voltage: 4.8V / 6V / 7.2V
Operating Speed: 0.07sec.60º / 0.06sec.60º / 0.05sec.60º
Stall Koppel: 2.5kg.cm /3.1kg.cm /3.7kg.cm
Grootte: 22.9X12.1X27.3mm
Gewicht: 21 g
Motor: 12mm Coreless
Potentiometer: indirecte Drive
Kogellager: 2 Ball Bearing
Gear: Metal
Case: Aluminium
Connector draad: 220mm
Plug: JR / Universal

Product
Specifications

Aanvullende Informatie

  • Sku:
    9355000003
  • Brand:
    Turnigy
  • Gewicht ( g)
    33.00
  • Lengte
    51.00
  • Breedte:
    31.00
  • Hoogte:
    46.00
  • Snelheid ( Sec / 60deg )
    0.05
  • Torque ( kg) ( min . 0,01 kg )
    3.70
  • Unit Weight (g):
    21
  • A ( mm ):
    31.00
  • B ( mm )
    23.00
  • C ( mm )
    27.00
  • D ( mm ):
    12.00
  • E ( mm ):
    32.00
  • F ( mm )
    20.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
smooth servos, my 450 with them on cyclic flies much better!
Quality
Value
Overall
Quality
Value
Overall
It is the second servant who mount and after a few minutes of operation stops and no longer works.
I opened the servant and the cause of malfunction is caused by the failure of the two leads that connect the engine to the circuit board.
The two leads are attached to the board and cut the engine where the plastic begins
Quality
Value
Overall
Quality
Value
Overall
It is the second servant who mount and after a few minutes of operation stops and no longer works.
I opened the servant and the cause of malfunction is caused by the failure of the two leads that connect the engine to the circuit board.
The two leads are attached to the board and cut the engine where the plastic begins
Quality
Value
Overall
Quality
Value
Overall
Nice servos. I had failures of the output shaft due to crashing but fixed them with replacement gears. Servo is otherwise very strong and fast and some of them have nearly a 100 flights without any issues. All in all I have about ten of them in use and have no troubles. Only the output shaft breakages, but those were caused by crashes, so my or other technical faults not related to servos. I have ordered quite a few spare gears and plan to run only these servos for the next few years in order to only use one good type of servo on all my helis where they can be used.
Quality
Value
Overall
Quality
Value
Overall
Habe mir ein Goteck HC2123T HV gekauft und mit dem TGY-306G-HV verglichen. Die Masse sind die selben. usserlich fast keinen Unterschied, das TGY ist minimal besser verarbeitet und hat ein 3cm lngeres Kabel 18cm zu 21cm. Dafr ist das Goteck ein bisschen leichter, 20,36gr zu 20,58gr. , und die Schrauben sind im Gehuse vewrsenkt. Die Kraft und Geschwindigkeit sind fast identisch. Das Goteck ist made in China das TGY made in Taiwan. Das Goteck ist fast 5 Dollar gnstiger. Aber bei der Rckstellgenauigkeit und der Stellcharakteristik merkt man den Preisunterschied. Das Goteck ist zwar ziemlich spielfrei stellt aber nicht so genau zurck wie das TGY auf 10cm Verlngerung sind etwa 2mm Ungenauigkeit. Bei der Feinstellung (wenn ich nur mit der Trimmtaste meiner Futaba Steuerung stelle) ist das TGY viel besser fast 3 mal so genau. Das TGY reagiert bei jedem Trimmklick sauber und mit dem gleichen Abstand, das Goteck erst bei jedem 2. oder 3. Klick und dann in unregelmssigen Stellabstnden. Fazit:Das Goteck ist ein gutes Servo zu einem spitzen Preis. Wer es aber genauer will muss 25pcnt mehr bezahlen und bekommt mit dem TGY ein supper Servo. Ich hoffe ich konnte denen die das selbe interessiert hat helfen.
Quality
Value
Overall
Quality
Value
Overall
Works really as great as some savx in my 450 size heli (i think even better)
Quality
Value
Overall
Quality
Value
Overall
j'ai monter 4 servos sur mon T REX 450 pro FBL V2 avec un MICRO BEAST X

et un ESC
Hobbyking YEP 60A (2~6S) SBEC Brushless Speed Controller

tous simplement extraordinaire malgr un bec qui dlivre seulement 5.5 volts
pour ces servos qui peuvent fonctionner sous 7.2 volts (nominal)

rapide ,prcis et pas un pet de jeu aprs une centaines de vols

anti couple hyper rapide et prcis

Quality
Value
Overall
Quality
Value
Overall
Not nearly as fast as advertised. Tested on a servo tester and found out that this just barely reaches 0.10sec/60.
Quality
Value
Overall
Quality
Value
Overall
Hello, Where can I get a gear set for this TGY-306G HV or are there other gear sets that can be used ?
Quality
Value
Overall
Quality
Value
Overall
Overall a very good servo. I'm using it with range: 810s to 2190s. It doesn't go further than 800s/2200s
Quality
Value
Overall
View all reviews
Upload
Videos
  • OXY 3 with 4 TGY 306 HV

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.