Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy ™ TGY-393V Coreless HV / BB / MG Servo w / Heat Sink 4.3kg / 0.10sec / 22,5 g

Generating Links

Turnigy ™ TGY-393V Coreless HV / BB / MG Servo w / Heat Sink 4.3kg / 0.10sec / 22,5 g

Prijs:

Now save bespaar € 0,00 € 0,00

€ 22,34
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
9122000013
Geen verzendkosten? Klik hier meer leren!

specificaties:
Operating Voltage: 6V ~ 7.2v
Gewicht: 22.5 gram
Afmetingen: 29 x 13 x 30 mm
Torque @ 6.0V: 3,6 kg / cm
Torque @ 7.2V: 4,3 kg / cm
Snelheid @ 6.0V: 0.12 sec / 60 ° onbelast
Snelheid @ 7.2V: 0.09 sec / 60 ° onbelast
Toestel: Metal gear / Dual kogellager
Motor: Coreless

  • Servo Torque ( kg) ( min . 0,01 kg ) 4.30
  • Servo Snelheid ( Sec / 60deg ) 0.09
  • Servo A ( mm ) 30.00
  • Servo B ( mm ) 29.00
  • Servo C ( mm ) 30.00
  • Servo D ( mm ) 13.00
  • Servo E ( mm ) 39.00
  • Servo F ( mm ) 21.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

bluesky123 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Awesome servo!

Jun 26, 2018

I was hesitant to buy this servo at first, but, after flying the two of them as aileron servos in PA Addiction X for a season, I've just bough several more for PA Katana 58". Very happy with these servos!

hayataro | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jan 19, 2016

Very good servo and affordable priced. This may OEM of Bluebird servos, Made BMS-383DMS to high voltage. Good quality, stiff, precise, silent. This is DIGITAL servo and control period is high about 400Hz.
I installed these for V-tail servos on Strega-3m full carbon Hotliner, supplies 6V from Turnigy 5V/6V 5A Heli-UBEC for Lipoly (6~16V).
Another pro. point is height. Total height is low and easy to install/linkage in a slender fuse.

botbeagle | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 09, 2015

Just bought half-a-dozen of these little beauts.

Have only tried them out on the bench, but can report that they all work perfectly.

They are nicely presented and build quality is apparently high, to judge by external appearances.

Really pleased, so far. They'll be going into a couple of gliders ... I'll report back when I've flown them for a while.

Matt | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 11, 2014

Absolutely brilliant servo!!
I've got this fitted to my Losi Mini 8 and although its slightly smaller than the stock one its twice as fast and carries more torque!!
Its also able to run at 7.2v so i've got it connected to an external BEC (my esc is only 5v) and its ultra quick. Its also smooth and centres precisely every time. This operates without fault :)
For the price, under 15 you honestly can not go wrong. These are a brilliant servo.
One thing i would suggest if running this in a car is to run a servo saver so you don't cause any damage to the gears on a heavy impact :)
Its the same fitting as a Servox & Futaba - 25 tooth.
I will say this puts A LOT of more expensive servo's to shame!

xtrmtrk | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Nov 27, 2013

These are nice solid, strong, fast servos. They are a smidge heavy though. The only really bad thing is the poor quality and poor selection of included servo horns. A servo this good should have a better assortment of horns.

majo1002 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 08, 2013

Nakon kupnje 4 kom. serva iste sam odlucio ugraditi na HobbyKing Katanu 1500 EP. Uz preinake sjedita serva na Katani serva se odlicno uklapaju na model. Serva su vrlo brza i dovoljna jaka za model raspona 1500 mm i teine 2600g. Proizvode lijepi zvuk kod pomicanja, centar serva bez uocljivih nedostataka.

MaciekK | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 28, 2013

Mocen serwo do Hydro-1 polecam. Uwaga jedynie na zabezpieczenie prze4d wilgocia serwo ewidentnie nie szczelne

Instech | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 02, 2013

Fantastic servo's. I will not buy analouge any more, HV is the way to go!!!

Very strong servo even on small stick movements.

Graham helis | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 24, 2013

got these servos in a 450 pro i set up for a friend, with a align 3G flybarless unit.

very smooth and well fast

cant really tell any difference from the savox 257

so very good

Kostas | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Nov 23, 2012

Servo is quite nice, fast, works, well with my Orange 7c FAST receiver. Not sure I like the open bearing on the top it is a place for debris to enter. Servo feels warm after a minute of use. Using it on Elevator and Rudder on my 2.65m KA7 sailplane. The two crowns on quality is because of the way the case is put together, two very brittle bolts screw into weak inserts on the aluminum heat sink. So far the servo has performed well on a LiFe pack.

  1. 1
  2. 2
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!