Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • USA

TZ-V2 0,50 Size Nitro 3D Helicopter Kit

TZ-V2 0,50 Size Nitro 3D Helicopter Kit

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
3699 g
SKU:
HKV2-50
Product
Omschrijving
Een geweldige kwaliteit kit, met uitstekende eigenschappen en een voorschot design. De V2 0,50 is een Nitro 0,50 grootte gas helikopter die de grenzen van je sport en 3D vliegende vaardigheden zal duwen.
Met een sterke en lichtgewicht G-10 belangrijkste frame, 120 of 140 graden swash-plaat, full metal belangrijkste blade grips en andere "Pro" level features, wij garanderen u zal niet teleurgesteld worden met deze helikopter.
Het bouwen van deze kit is snel en gemakkelijk als veel van de onderdelen zijn voorgemonteerd in de fabriek. De eerste vlucht kenmerken in standaard bekleding zijn zeer soepel en stabiel, waardoor het perfect voor beginners en intermediaire niveau piloten. Upgraden van peddels en staart messen naar 3D lichtgewicht ontwerpen zullen onvergelijkbare 3D-prestaties mogelijk te maken.
Naast de beroemde Mild-to-Wild prestaties van de V2's, is de V2's onderhoudskosten laag gehouden met onze volledige lijn van low-cost onderdelen *.
Type.
Type: 0,50 size gloed aangedreven 3D Pro Helicopter
Control System: 120 ° CCPM
Rotor Blade Lengte: 600mm
Belangrijkste kenmerken.
Sterk maar toch lichtgewicht G-10 zijframes
Drie punt metalen hoofdas lager mounts
Metal belangrijkste blade grips
Strong Arm A-stijl CNC gefreesde lift linkage
CNC gefreesd aluminium motorsteun blokkeren
Push-pull koppelingen op alle cyclische servo's
Forward mount motor voor gemakkelijke toegang gloeibougie
120 ° CCPM swashplate 140 ° optioneel verkrijgbaar met JSS-1634 armen
Vooraan gemonteerde radio montageframe
Weinig onderhoud riem aangedreven staart
Gemakkelijk te verwijderen, trillingen geïsoleerde tank
Pre-wit geschilderd glasvezel luifel met decals
Product Spec.
Lengte: 1247mm
Lengte: 355mm
Breedte: 231mm
Overbrenging: 8.5: 1: 4.56
Pinion gear: 10T
Main gear: 85T
Belangrijkste rotordiameter: 1345 ~ 1365mm
Staart rotor diameter: 242mm
Hoofdrotor lengte: 600 ~ 620mm
 
Flying gewicht: ca. 3300g
Vereiste items.
Nitro engine (0,50)
Servo's (standaard formaat)
Radio Gear: Gyro / Rx
Rx Batterij: (UBEC met 2 Cel LiPoly)
600mm Blades met 12 / 4mm wortel
* Onderdelen worden opgenomen in de komende dagen.
Product
Specifications

Aanvullende Informatie

  • Sku:
    HKV2-50
  • Brand:
    Nvt
  • Gewicht ( g)
    3699.00
  • Lengte
    710.00
  • Breedte:
    175.00
  • Hoogte:
    260.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this heli last yr. Not happy. Appearance is not as solid. I know it's cheap heli but I bought a used A L I G N T r e x 600 n for 280 US dollars. It's worth the price difference.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Here is 3d cad model(SW) for tz50v2
https://grabcad.com/library/js-tz50-v2-1?utm_campaign=newlike&utm_content=yourmodelpic&utm_medium=email&utm_source=user-email
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My brand new Trex600 ended up in tears after a link broke on the head and I had multiple subsequent clutch failures. I replaced it with this heli which is a great success story. The links are far better quality and will not easily fail. The clutch is exposed such that perfect alignment is easy which will certainly save a lot of agony given the endless lists of clutch failure stories one reads about on the web. Clearly much thought has gone into this design as everything is well placed and reachable. It seems that all usual heli failure points have been taken into account and designed with reliability in mind. The feathering shaft bolts however seemed a litte suspect, so the shaft was tapped as deep is it could go and the bolts were replaced with the longest possible high tensile bolts - no problems. The heli is on the heavy side and is large for a 600. It is an absolute pleasure to fly and does all it has to, including some 3D with HK CF blades. Highly recommended!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hey all, this is the second .50 size tz ive owned. The first one still exsists, its tired is all, and personally I could not be bothered re bushing, replacing bearings, etc, etc. These helis pound for for pound are the best heli i can find, they are stable, they are forgiving and in assembly quick to get up and runnmg. Even the crank boss, you have all the differant tapers to suit differant motors, ir, os max, asp, enya and so forth so your home free with the set up, the electrics are just as easy to navigate with. 120 degree swashplate. The helicopter is not a let down ans im looking forward to decomishioning my other 50 tz and assembling my new tz 50. all the best, i hope you enjoy my enthuiasm, cheers and happy flying, cheers
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Making a correction in my comment, because the lack of a word changed direction:
I had no big problems to assemble and adjust the JS Frenzy 50. So far everything works as expected. I liked the frenzy 50, good stability in flight - recommend. Watch a video on http://youtu.be/P6hKblGSjQM
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I had big problems to assemble and adjust the JS Frenzy 50. So far everything works as expected. I liked the frenzy 50, good stability in flight - recommendo.Veja a video on http://youtu.be/P6hKblGSjQM



No tive grandes problemas para montar e ajustar o JS Frenzy 50. At agora tudo funcionando conforme esperado. Eu gostei do frenzy 50, boa estabilidade em vo - recommendo.Veja um vdeo em http://youtu.be/P6hKblGSjQM
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Helicopter easy to assemble, can improve instruction manual regarding tail docking in the frame. First turn the engine on JS TZ Frenzy 50 V2. OS 50 Hyper Engine, 4 servos (Cyclic and motor) Futaba 3152, Gyro Futaba 520 and tail servo Futaba 9254. Using voltage regulator of Power Flight 8, a battery power flight of 2100 mA, 2S. Engine fuel Rapicom 15pcnt N, 20pcnt Oil See the video at: http://www.youtube.com/watch?v=rz1hCVEkMKM
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
superb, good looking heli.
and most parts are same as raptor 50.
note; the 82t sprocket can be not true so i got a raptor one,
i'm so pleased with this one,thanks hobbyking
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Best helicopter.

Very high quality. Cheap parts.

I will recommend to all.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Engine Mount isn't fit for ASP S46H http://koratbbshop.com/download/DSCF9973.JPG (see picture)
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.