Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

V-Lite J3 Cub 1800mm Glow Rood / Wit (ARF)

V-Lite J3 Cub 1800mm Glow Rood / Wit (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
3600 g
SKU:
J-3_CUB_46

Combine

essential items and
esc
servo
motor
acc
Product
Omschrijving

Het ding dat je echt opvalt aan de V-Lite J3 is natuurlijk de doorzichtige afdekking die u toestaat om de uitstekende kwaliteit van de constructie die eronder ligt zien. Er is geen twijfel, dit J3 is gebouwd met gewichtsbesparing in het achterhoofd, in feite de droge casco weegt slechts 1050g, geweldig voor een 1800mm schaalmodel. Lichtgewicht niet kwetsbaar bedoel, op zoek rond de bouw van deze Cub is meer als het kijken door een precisie aerobatic model!

Praktische functies is voorzien van een 2pc afneembaar vleugel, opnieuw gewichtsbesparing is een functie met de vleugel met behulp lighweight legering stokken en een CF-buis. De eenvoudige maar sterke onderstel maakt gebruik van een 4 bout patroon dat gewicht verspreidt en het model heeft ook een tweede te monteren aan de achterzijde voor de praalwagens (niet inbegrepen). De echte aanrader motor is een 0,46, die in combinatie met de lichtgewicht toestel zou een "pittige" performance geven, ok het is een Cub, maar het is leuk om te gooien in de oneven lus, stall turn en wing over! Een werkelijk fantastische model dat erin slaagt nog retro modern te zijn, schaal maar toch leuk, het is een classy Cub!

specs:
Spanwijdte: 1800mm
Lengte: 1180mm
Flying Gewicht: 2,6 kg
4 Channel (5 servo - niet inbegrepen)

inclusief:
instructies
alle Hardware
Brandstoftank & Motor Mount

vereist:
Uw Eigen 4-kanaals TX / RX
0,46 Glow Engine
5 x Standard Servo
RX batterij / power

Product
Specifications

Aanvullende Informatie

  • Sku:
    J-3_CUB_46
  • Brand:
    Nvt
  • Gewicht ( g)
    3600.00
  • Lengte
    1100.00
  • Breedte:
    210.00
  • Hoogte:
    300.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The fuselage is strong enough but the wings are broken like breadsticks. The model flies discreetly but the build quality is not good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used a .40 magnum, could use more power but still flys great, docile& stable. used as trainer with buddy box. graet for teaching a new piolt to fly.looks good flys great
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
eh adquirido este modelo y vuela realmente bien muy conforme,me hubera gustado otro color en el recubrimiento pero igualmente es un buena opcion ,lo recomiendo sobre todo para comenzar.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
What a beautiful BIG plane for < $100. I used the Turnigy G46 that is supposed to be the equivilent of a .46 gas motor. I used a Nano-Tech 5S-5000Ma battery and a 50A BlueBird ESC. With a 3-Blade 10/7 prop it draws ~ 30A at full power on my workbench and is a VERY strong combination!

The only hassle I had was installing the battery without an external hatch because you have to remove the wing. I added an external XT-60 male connector between the batt and the ESC and routed it to the gear strut. I use a female XT-60 as a shorting plug to turn the power on and off while leaving the battery installed. I get about 3 flights with the 5 Amp battery before I have to remove it for charging. It's interesting to see it has the rear landging gear mount already installed for a float kit, but it does not have any mounts for the lower end of the wing struts. Weird!

It is an impressive airplane and attracts a lot of comments at the field.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got mine today 3 days to Long Island NY from USA warehouse all I can say is SWEET !!!!!!!!!!!!!!

Should have it ready to fly in a couple of days and will let you know how she flies if the weather holds good
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hi this V-Lite J3 Cub 1800mm Glow Red/White (ARF) made good material when i want to buy it i had been have some concerns but when i had been have in my hand i said it made good balsa and polywood you cant broke it never best material best plane i could not see this quality anywhere thanks so much hk
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great plane, only the engine indicated (46) is a lot to it. I recommend a smaller engine: ASP S21A Two Stroke Glow Engine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
gostei do meu ...tive de reforar algumas coisas como essas astes que seguram a asa e passar um pouco de cola no corpo dele mas emfim e exelente....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Looks good but very light balsa Yes the wings are long and the fuselage is short as the scale. But I think it would collapse if you try any flying tricks. The covering is very light and can puncture easily. And so much of a manual just few pages that tells you nothing. And you have to have experience to put it together. The windows plastic cover dose not fit in the place you have to do some magic to fit it to the body. And the axels are just screws and fitted with self looking nuts. You have to handle it with care as it may crack for slight pressure. You must cross check the balsa joining points. As mine needed to reinforce the part where the leading edge of the wings gets lodged it was lose and cracked. And you have to find a way to Cut the cowl in a way that match your engine. I shall post the flying experience soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
servo
motor
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.