Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Van's Vliegtuigen RV-4 Sport Scale Balsa, Glow / EP 1600mm (ARF)

Generating Links

Van's Vliegtuigen RV-4 Sport Scale Balsa, Glow / EP 1600mm (ARF)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 93,29
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
437000004
Geen verzendkosten? Klik hier meer leren!

De RV-4 is een van de meest succesvolle en best verkochte "home-bouwt" in de wereld, de RV-4 is een aerobatic vliegtuig dat is heel goed in staat op het gebied van cross-country, in feite is dit particlar model is gebaseerd op de RV-4 gebruikt door Jon Johanson om zijn beroemde Millenium 2000 Round the flight Wereld Solo.

Deze fantastische ARF is gebouwd met behulp van een traditionele semi dekzeil light-laags / balsa constructie voor een combinatie van een laag gewicht en kracht. De bekleding is afgedrukt op een hoog detail afwerking die paneel lijnen en klinknagels omvat terwijl de hoogglans afwerking zorgt voor een eenvoudige reiniging en een uitstekende duurzaamheid te geven. De RV-4 wordt geleverd met een zeer uitgebreide hardware kit die bestaat uit een unieke motor / motor firewall aan te koppelen voor een van beide branden of vermogen EP treinen, een legering spinner, brandstoftank & motorsteunen, heavy duty & geanodiseerd gaffel en pushrods, etc. de RV-4 is ook praktisch, de staart is afneembaar en de vleugels van een plug-in arrangement, het model beschikt ook over robuuste belangrijkste onderstel en een bestuurbare staart wiel.

De RV-4 is voorzien van al die attibutes je zou zoeken in een grote sport-model, een lichte vliegende gewicht in combinatie met een royale vleugel gebied voor voorspelbare nog wendbare vliegeigenschappen, flaps voor een uitstekende lage snelheid handling en natuurlijk robuustheid en functionaliteit, gooien in de grote schaal uiterlijk, het hoge niveau van inbegrepen hardware en de zeer aantrekkelijke prijs, het is vrij duidelijk dat de RV-4 is een koopje!

Kenmerken:
• Lichtgewicht Bouw
• Gedrukt Afdekken met een hoog detailniveau
• Robuuste onderstel
• Uitgebreide Hardware Kit Inbegrepen
• Glow of Electric Power
• Fast Build
• Plug In Wing

specs:
Spanwijdte: 1600mm
Lengte: 1190mm
Gewicht: 3000g

vereist:
Uw Eigen 6-kanaals TX / RX
7 x Std Servo (6 x voor het EP versie)
0,46 ~ 0,52 Tweetakt Glow Engine
42mm Motor 600kv ~ 650kv (EP Version)
Batterij 3300mAh ~ 4000mAh 4s Lipo (EP Version)
60A OPTO ESC (EP Version)
RX Battery
RX Aan / uit-schakelaar
UBEC / Regulator indien van toepassing (Lipo RX batterij)

  • Van's Aircraft RV-4 Sport Scale Balsa
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

kekelala | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 01, 2013

Ok here again, action speaks louder than words! You will see so e loops, rolls, stall turn, inverted and half-assed knife edge etc.

radiobirds .com /?articleID=66&type=article (please omit spaces)

kekelala | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 01, 2013

http://radiobirds.com/?articleID=66&type=article

See it flies, action speaks louder than words!

kekelala | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 18, 2013

Looks as good as it flies and flies as good as it looks. 15cc gas used with 15x6 prop. Flies slow, lands slow. No bad habit. Low stall speed even with the weight of gasso and 100g of lead on the tail. Elevator push rod has some friction but it was rectified by changing them to full metal push rods. Flaps are redundant but sure can slow down the landing speed. Servo tray flexes easily, but not a 3D plane so I don't care much

pejay | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2013

Further to my earlier review - I flew the plane today and it is a great flyer. I leveled out all control surfaces before flying and it flew "out of the box" with no trims needed. I used the recommended motor NTM 4248/650 kV and prop 14x6. With 4S, 3000 mAh it drew 45A and gave a torque of 3 kg which is same as full weight of plane with battery. It is a very forgiving plane, easy to fly almost like a trainer. Only small problem- the supplied wheels are off center and too large for the wheel cover so I recommend installing slightly smaller wheels. Still as I said in my earlier review, the plane is a true bargain, very nice looking with lots of details as well as a great flyer. A grand 5 crowns version

iwade | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 29, 2013

I have just received mine and just started assembly so not flown as yet.
First impressions- it looks very quality and well presented. People who are speculating if it is an old V-Mar model I can tell you the instruction book is V-Mar dated 2002!
The model gives the impression of one of the very early Chineese type kits altho I think V-Mar made in Vietnam. Very impressed with the standard of the hardware package - for a change! Very nice anodised and colouerd alloy horns and push rod connectors. And a very clever EP conversion power pod module.
However as I started the assembly the very poor quality control at the factory became evident. Very nice F/glass wheel pants but when fitted to the fibreglass undercarriage the wheels will not revolve - they catch on the inside top of the wheel pant. I can only think of a smaller size wheel being the fix for this? I have left the pants off in the meantime.
When fitting the tail plane - the factory has left the slot in the tail joined with a block of balsa so the tail plane won't slide into the slot. I had to saw this block out and then sand the slot smooth. The little metal fitting that slots into the rudder to activate the tail wheel is not glued in .
The main wings have a wooden dowell locating peg at their trailing edge which fits into the fuselage. Mine only had one dowell in one of the wings and it was about 5 sizes too big and had

pejay | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 27, 2013

Kit arrived and as always in good condition. Workmanship of the plane is truly very good except for one thing. The white cover is semi transparent. Prints on the cover is excellent so I wonder why manufacturer did not use a white opaque covering film. You can actually see it on the pictures here if you look closely - you can see the balsa/ply structure on body and wings. One great feature- the landing gear is mounted with shock absorbing rubber inserts. But it seems from the manual that battery mounting is not so clever using a plywood box mounted to the firewall. Not sure if need to remove the cowling to install battery. But will see how it can be done in an easy way once I build the plane. Another feature not mentioned in the description - it comes with the pilot and a great looking 3D instrument panel. I am not sure if pilot is supposed to look like Jon Johansen whom I think is od Scandinavian decent? To me he looks like a South American. In all, this is a great looking plane, very high quality and at a fantastic low price. I am sure it will be a great flyer - will let you know.

Klantbestanden
No File Name Download [362]
No File Name Download [315]
No File Name Download [274]
No File Name Download [234]
No File Name Download [377]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!