Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Vego GW320X Drone Frame Kit

Generating Links

Vego GW320X Drone Frame Kit

Prijs:

Now save bespaar € 0,00 € 0,00

€ 60,91
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
697000002-0
Geen verzendkosten? Klik hier meer leren!

Ontworpen en geproduceerd in Japan, Vego drone frames behoren tot de beste die we ooit in termen van kwaliteit en de afwerking hebben gezien. De koolstof snijden en afwerking is ronduit prachtig, als het de kwaliteit die u op zoek bent naar je zult niet teleurgesteld worden met dit product.

De GW320X is gemaakt voor racen of extreme 3D manoeuvres. Het is een goed doordacht, sterk, "H" frame design. De armen kunnen worden geconfigureerd om ofwel 30 of 45 graden naar uw vliegende stijl.

Komen op 152g de GW320X is een extreem lichtgewicht frame. Gezien het lichte gewicht zou je aannemen dat het te kwetsbaar zijn, maar dit is een volledig carbon frame van het geven van grote sterkte en duurzaamheid. De armen zijn gemaakt van 4mm multilayer koolstofvezel met het middelste kader 2mm carbon fiber. De armen zijn lang genoeg om voor 5-6 "propellers voor betere prestaties.

De 30mm centrum frameplaat maakt het ideaal voor de montage Naze, Nano of CC3D vlucht controllers en alle andere eisen zoals FPV camera en zender, ontvanger en VOB. Het bovendek wordt geleverd in twee delen zodat u ofwel flat decks of je kon hoek een dek voor een opname camera. er trillingsdemping op het bovendek.

Het is een uiterst makkelijk te bouwen. Dus voeg uw favoriete spullen en maximum uit de kracht voor een aantal snelle vliegen.

Kenmerken:
• Ontworpen voor racen of 3D-fun
• De armen kan worden gewijzigd tussen 30 en 45 graden
• Dikke 4.0mm duurzaam, multilayer koolstofvezel armen
• Center kader 2.0mm koolstofvezel
• Ontworpen voor 2204-2206 motoren, 16 / 19m mount, 3mm gat
• Schroef grootte 5-6 "
• Mechanische plaat afmeting is 30mm kan Naze, Nano, CC3D, etc gebruiken
• De naam GW wordt uitgesproken Go-Wan. Het is Japans voor sterke arm

specs:
Materiaal: Carbon fiber frame van
Wielbasis: 320mm (30/45 graden arm vorming)
Frame Hoogte: 36mm
Frame Gewicht: 152g
Motor Mount Bolt Holes: 16 / 19mm

inbegrepen:
GW320X Frame kit
schroef zak

Vereiste:
4 x 2204-2206 motoren
4 x 15-30A ESC
1 x Batterij 1000mAh-2200mAh 11.1-22.2V (3S-4S)
4 x 6/5 "Schroeven
1 x Flight controller
1 x Power Distribution Board
5-6 channel TX / RX

  • Vego GW320x GW250X Quad Frame
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Frank | Geverifieerde koper

  • Overall
  • Quality
  • Value

Excellent frame - super quality

Apr 09, 2017

Don't know what the other reviewer was talking about when he said there were no holes in the baseplate for the FC. Of COURSE there are! In fact, I stacked my Omnibus F3 FC and 4 in 1 ESC on short nylon stand-offs, and with the included 25mm black stand offs and the 3mm thick arms, I had plenty of clearance between top and bottom plate. Don't build the way the photo shows!!! Build it to look like an Immersion Vortex 250 Pro and everything (rx included) can be between the two main decks, fully protected. No need for the two small plates unless you add GPS (why in this size frame??). With a set of EMAX 2600kv Race edition motors and 3 blade props this thing is HOT!!! Love the frame. Highly recommended.

eric | Geverifieerde koper

  • Overall
  • Quality
  • Value

Great quality but not very practical

Feb 24, 2017

I was looking for something larger than a 250 size quad that I could mount a standard set up and GPS. The 320 size looked perfect for what I was looking for. When I un boxed this kit it looked very simple and nice quality, great! After assembling the frame I started to plan how each component will be placed and realized there are no holes on the base plate for the FC. There are 2 holes that are for two of the standoffs that are the same size as a standard FC but if using them, your FC will not be centered on the base plate. (look at the picture of the bottom plate and you will see what I mean) Therefore I had to drill holes in the plate myself, not a huge problem but a little time consuming and should be mentioned in the kit description. Also, there are no landing feet or pads included which you will need to get unless you're ok landing directly on the bottom base plate! And one last thing to consider is battery placement, on my set up the battery will have to be strapped to the bottom of the quad so I have to craft my own landing skids.

dtm360 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 03, 2016

Very nice quality carbon, Not the very best I have seen (I use to collect exotic RC cars - QVA!) but still pretty good!

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

Accessoires