Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

Kernkop 3545-1850KV EDF Motor 90mm

Kernkop 3545-1850KV EDF Motor 90mm

QTY:

Now save bewaar € 0,00 € 0,00

€ 18,10
Stock:
Gewicht:
235 g
SKU:
Warhead1850KV

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

De Kernkop 1850kv EDF Out-runner motor is ideaal voor 90mm (3,5 inch) fans met behulp van een 5-6 mes rotor in combinatie met een hoog voltage [5s ~ 6S] opgezet, ideaal voor het houden van maximaal stroomverbruik tot een optimaal niveau.

specs:
RPM / v: 1850kv
Afmetingen: 67 x 36mm
Shaft: 5.0mm
Voltage: 11.1V-22.6v [3s ~ 6s]
Gewicht: 171g
No-load stroom: 3.5A / 11V
Max barsten stroom: 80A
Max Watts: 1650W
ESC: 100A
Resistance: 0.012 ohm
Stuwkracht: 2650g [bijvoorbeeld op basis van 5 blade fan / 6s combo]

Montagegaten Bolt Circle: 26mm
Mtg. Hole Number & Grootte: 4 x M3

Product
Specifications

Aanvullende Informatie

  • Sku:
    Warhead1850KV
  • Brand:
    Nee
  • Gewicht ( g)
    235.00
  • Lengte
    87.00
  • Breedte:
    45.00
  • Hoogte:
    50.00
  • Kv ( tpm / v )
    1850.00
  • Max Currents (A )
    80.00
  • Vermogen ( W):
    1650.00
  • Lengte B ( mm ):
    67.00
  • Kan Lengte D ( mm )
    28.00
  • Max Voltage ( V )
    22.00
  • Shaft A ( mm ):
    5.00
  • Unit Weight (g):
    171
  • C Diameter ( mm )
    35.00
  • Totale lengte E ( mm )
    87.00
  • Resistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
After replacing bearings motor gives about 3 kg. thrust on 90mm 5 blade EDF, 6S and 100A ESC. Good out-runner motor for 90 mm. EDF, but not of the best quality bearings.
Quality
Value
Overall
Quality
Value
Overall
Have just bench tested this motor. 6 blade, pulled 74A and 2.6kg. Motor did come off a little hot, but for this price it is a bargain. The motor came with good balance also.
Quality
Value
Overall
Quality
Value
Overall
Came in a box, looks nice and ood machined. I use it on a 75mm EDF at 6S and works good. Unfortunately I do not have measure-equipment, but I am happy with the power of that motor.
Quality
Value
Overall
Quality
Value
Overall
Durable with extreme performance even if overloaded ... see the web for evidence ... highly recommended
Quality
Value
Overall
Quality
Value
Overall
ATTENZIONE NON SO SO DIEPENDE DAL MIO MOTORE CHE NON FUNZIONA, MA CON UNA BATTERIA 6 CELLE E VENTOLA 90mm 7 PALE SI BLOCCA.

PROVATO CON 5 CELLE E STESSA VENTOLA 1400W.

Ciao a utti
Quality
Value
Overall
Quality
Value
Overall
A top quality motor, can't fault mine and a super price for what it is. Mine is on a 90mm 7 blade fan and it has impressive performance with very smooth running giving a good jet like sound. This relies on getting a balanced fan unit of course, A five cell Li Po is used.
Quality
Value
Overall
Quality
Value
Overall
I gave it 5 crowns even tho it came with out motor screws which you really need because I don't know what strange thread pattern it is. I ended up re tapping mine to 4mm and its ok now. This motor makes great power and seems pretty well balanced. Ive put it in a flyfly 90mm 6 blade fan and mounted it on the back of a Multiplex Funjet. Using a Redbrick 125 esc with a 6S 2600 40c batt. Estimated speed is about 120 mph maybe a little more. Great little motor!
Quality
Value
Overall
Quality
Value
Overall
This is very good motor. i use this with haoye 3.5 inches 7 blades in my homemade jet on 5S and it has 2.4 kgr thrust with intake ring . 86 Ampere at full throtlle. Thank you HK!!
Quality
Value
Overall
Quality
Value
Overall
Good motor for the price, make sure you set your ESC timings for mid range, I'm using the HK red brick 100 amp ESC and it defaults to inrunner 1 degree. I changed that to outrunner 7 degree and 8 KHz PWM 24 volts 1750 watts static with a 6 blade fan.
Quality
Value
Overall
Quality
Value
Overall
Con edf haeoye 7blade f 84a max e 1700watt a 6s 4000mah zippy 40c. Spinta 2,4 kg. su Mirage flyfly peso totale 2,0kg. un p caldo alla fine ma siamo in estate.

With edf haeoye 7blade ago 84th 1700watt max and a zippy 6s 4000mAh 40c. Thrust 2.4 kg. Mirage flyfly total weight of 2.0 kg. a little hot at the end but we are in summer.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.